| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| EspoCRM is an open source customer relationship management application. Versions 9.3.3 and below have a stored HTML injection vulnerability that allows any authenticated user with standard (non-administrative) privileges to inject arbitrary HTML into system-generated email notifications by crafting malicious content in the post field of stream activity notes. The vulnerability exists because server-side Handlebars templates render the post field using unescaped triple-brace syntax, the Markdown processor preserves inline HTML by default, and the rendering pipeline explicitly skips sanitization for fields present in additionalData, creating a path where attacker-controlled HTML is accepted, stored, and rendered directly into emails without any escaping. Since the emails are sent using the system's configured SMTP identity (such as an administrative sender address), the injected content appears fully trusted to recipients, enabling phishing attacks, user tracking via embedded resources like image beacons, and UI manipulation within email content. The @mention feature further increases the impact by allowing targeted delivery of malicious emails to specific users. This issue has been fixed in version 9.3.4. |
| When segmenting specially crafted text, segmentation would corrupt memory leading to a potentially exploitable crash. This vulnerability was fixed in Firefox 134, Firefox ESR 128.6, Thunderbird 134, and Thunderbird 128.6. |
| Due to insufficient escaping of the special characters in the "copy as cURL" feature, an attacker could trick a user into using this command, potentially leading to local code execution on the user's system.
*This bug only affects Firefox for Windows. Other versions of Firefox are unaffected.*. This vulnerability was fixed in Firefox ESR 128.10, Firefox ESR 115.23, and Thunderbird 128.10. |
| Adobe Flash Player before 13.0.0.258 and 14.x and 15.x before 15.0.0.239 on Windows and OS X and before 11.2.202.424 on Linux, Adobe AIR before 15.0.0.293, Adobe AIR SDK before 15.0.0.302, and Adobe AIR SDK & Compiler before 15.0.0.302 allow attackers to execute arbitrary code or cause a denial of service (invalid pointer dereference) via unspecified vectors. |
| Adobe Flash Player before 10.3.183.20 and 11.x before 11.3.300.257 on Windows and Mac OS X; before 10.3.183.20 and 11.x before 11.2.202.236 on Linux; before 11.1.111.10 on Android 2.x and 3.x; and before 11.1.115.9 on Android 4.x, and Adobe AIR before 3.3.0.3610, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2012-2037. |
| During an address list folding when a separating comma ends up on a folded line and that line is to be unicode-encoded then the separator itself is also unicode-encoded. Expected behavior is that the separating comma remains a plan comma. This can result in the address header being misinterpreted by some mail servers. |
| The (1) TLS and (2) DTLS implementations in OpenSSL 1.0.1 before 1.0.1g do not properly handle Heartbeat Extension packets, which allows remote attackers to obtain sensitive information from process memory via crafted packets that trigger a buffer over-read, as demonstrated by reading private keys, related to d1_both.c and t1_lib.c, aka the Heartbleed bug. |
| fastping.c in MRLG (aka Multi-Router Looking Glass) before 5.5.0 allows remote attackers to cause an arbitrary memory write and memory corruption. |
| Stack-based buffer overflow in the CComVariant::ReadFromStream function in the Active Template Library (ATL), as used in the MPEG2TuneRequest ActiveX control in msvidctl.dll in DirectShow, in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP2, Vista Gold, SP1, and SP2, and Server 2008 Gold and SP2 allows remote attackers to execute arbitrary code via a crafted web page, as exploited in the wild in July 2009, aka "Microsoft Video ActiveX Control Vulnerability." |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959. |
| Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. |
| The rds_page_copy_user function in net/rds/page.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel before 2.6.36 does not properly validate addresses obtained from user space, which allows local users to gain privileges via crafted use of the sendmsg and recvmsg system calls. |
| Apache Log4cxx's XMLLayout https://logging.apache.org/log4cxx/1.7.0/classlog4cxx_1_1xml_1_1XMLLayout.html , in versions before 1.7.0, fails to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets in log messages, NDC, and MDC property keys and values, producing invalid XML output. Conforming XML parsers must reject such documents with a fatal error, which may cause downstream log processing systems to drop or fail to index affected records.
An attacker who can influence logged data can exploit this to suppress individual log records, impairing audit trails and detection of malicious activity.
Users are advised to upgrade to Apache Log4cxx 1.7.0, which fixes this issue. |
| Incorrect boundary conditions in the Audio/Video: GMP component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8. |
| Rack is a modular Ruby web server interface. From versions 3.0.0.beta1 to before 3.1.21 and 3.2.0 to before 3.2.6, Rack::Utils.forwarded_values parses the RFC 7239 Forwarded header by splitting on semicolons before handling quoted-string values. Because quoted values may legally contain semicolons, a header can be interpreted by Rack as multiple Forwarded directives rather than as a single quoted for value. In deployments where an upstream proxy, WAF, or intermediary validates or preserves quoted Forwarded values differently, this discrepancy can allow an attacker to smuggle host, proto, for, or by parameters through a single header value. This issue has been patched in versions 3.1.21 and 3.2.6. |
| Memory safety bugs present in Firefox ESR 115.25, Firefox ESR 128.12, Thunderbird ESR 128.12, Firefox ESR 140.0, Thunderbird ESR 140.0, Firefox 140 and Thunderbird 140. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 141, Firefox ESR 115.26, Firefox ESR 128.13, Firefox ESR 140.1, Thunderbird 141, Thunderbird 128.13, and Thunderbird 140.1. |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 146, Firefox ESR 140.6, Thunderbird 146, and Thunderbird 140.6. |
