| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix use-after-free in sock_def_readable()
A race condition exists between lec_atm_close() setting priv->lecd
to NULL and concurrent access to priv->lecd in send_to_lecd(),
lec_handle_bridge(), and lec_atm_send(). When the socket is freed
via RCU while another thread is still using it, a use-after-free
occurs in sock_def_readable() when accessing the socket's wait queue.
The root cause is that lec_atm_close() clears priv->lecd without
any synchronization, while callers dereference priv->lecd without
any protection against concurrent teardown.
Fix this by converting priv->lecd to an RCU-protected pointer:
- Mark priv->lecd as __rcu in lec.h
- Use rcu_assign_pointer() in lec_atm_close() and lecd_attach()
for safe pointer assignment
- Use rcu_access_pointer() for NULL checks that do not dereference
the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and
lecd_attach()
- Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(),
lec_handle_bridge() and lec_atm_send() to safely access lecd
- Use rcu_assign_pointer() followed by synchronize_rcu() in
lec_atm_close() to ensure all readers have completed before
proceeding. This is safe since lec_atm_close() is called from
vcc_release() which holds lock_sock(), a sleeping lock.
- Remove the manual sk_receive_queue drain from lec_atm_close()
since vcc_destroy_socket() already drains it after lec_atm_close()
returns.
v2: Switch from spinlock + sock_hold/put approach to RCU to properly
fix the race. The v1 spinlock approach had two issues pointed out
by Eric Dumazet:
1. priv->lecd was still accessed directly after releasing the
lock instead of using a local copy.
2. The spinlock did not prevent packets being queued after
lec_atm_close() drains sk_receive_queue since timer and
workqueue paths bypass netif_stop_queue().
Note: Syzbot patch testing was attempted but the test VM terminated
unexpectedly with "Connection to localhost closed by remote host",
likely due to a QEMU AHCI emulation issue unrelated to this fix.
Compile testing with "make W=1 net/atm/lec.o" passes cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively. |
| Memory safety bugs present in Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
| Use after free in WebRTC in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Use After Free in Printing in Google Chrome on Linux, Mac, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Low) |
| Use after free in Audio in Google Chrome on Mac prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix use-after-free in bond_xmit_broadcast()
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
================================================================== |
| Use after free in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Skia in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Aura in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in GPU in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Fullscreen in Google Chrome on Windows prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Aura in Google Chrome on Windows prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Fullscreen in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in DOM in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in SVG in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Passwords in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Mobile in Google Chrome on iOS prior to 148.0.7778.96 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
