| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate EaNameLength in smb2_get_ea()
smb2_get_ea() reads ea_req->EaNameLength from the client request and
passes it directly to strncmp() as the comparison length without
verifying that the length of the name really is the size of the input
buffer received.
Fix this up by properly checking the size of the name based on the value
received and the overall size of the request, to prevent a later
strncmp() call to use the length as a "trusted" size of the buffer.
Without this check, uninitialized heap values might be slowly leaked to
the client. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require 3 sub-authorities before reading sub_auth[2]
parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on
match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is
the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares
only min(num_subauth, 2) sub-authorities so a client SID with
num_subauth = 2 and sub_auth = {88, 3} will match.
If num_subauth = 2 and the ACE is placed at the very end of the security
descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The
out-of-band bytes will then be masked to the low 9 bits and applied as
the file's POSIX mode, probably not something that is good to have
happen.
Fix this up by forcing the SID to actually carry a third sub-authority
before reading it at all. |
| A vulnerability was found in OpenBMB XAgent 1.0.0. This impacts the function check_user of the file XAgentServer/application/websockets/share.py of the component ShareServer WebSocket Endpoint. Performing a manipulation of the argument interaction_id results in missing authentication. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in EyouCMS up to 1.7.9. The affected element is the function GetSortData of the file application/common.php. The manipulation of the argument sort_asc leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The HTTP parser of Tapo C210 v3, C220 v1 and C520WS v2 cameras improperly handles requests containing an excessively long URL path. An invalid‑URL error path continues into cleanup code that assumes allocated buffers exist, leading to a crash and service restart. An unauthenticated attacker can force repeated service crashes or device reboots, causing denial of service. |
| PySpector is a static analysis security testing (SAST) Framework engineered for modern Python development workflows. The plugin security validator in PySpector uses AST-based static analysis to prevent dangerous code from being loaded as plugins. Prior to version 0.1.8, the blocklist implemented in `PluginSecurity.validate_plugin_code` is incomplete and can be bypassed using several Python constructs that are not checked. An attacker who can supply a plugin file can achieve arbitrary code execution within the PySpector process when that plugin is installed and executed. Version 0.1.8 fixes the issue. |
| Mitgation of CVE-2026-4519 was incomplete. If the URL contained "%action" the mitigation could be bypassed for certain browser types the "webbrowser.open()" API could have commands injected into the underlying shell. See CVE-2026-4519 for details. |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually] |
| OpenClaw before 2026.3.31 contains a privilege escalation vulnerability allowing paired nodes with role=node to dispatch node.event agent requests with unrestricted gateway-side tool access. Attackers with trusted paired node credentials can escalate privileges by leveraging unrestricted agent.request dispatch to achieve remote code execution on the gateway. |
| OpenClaw before 2026.3.24 contains an environment variable injection vulnerability in the CLI backend runner that allows attackers to inject malicious environment variables through workspace configuration. Attackers can craft malicious workspace configs to inject arbitrary environment variables into the backend process spawning, enabling code execution or sensitive data exposure. |
| OpenClaw before 2026.3.31 contains an incomplete scope-clearing vulnerability in trusted-proxy authentication mode that allows operator.admin privilege escalation. Attackers can exploit this by declaring operator scopes on non-Control-UI clients, allowing self-declared scopes to persist on identity-bearing authentication paths and escalate privileges. |
| A weakness has been identified in SourceCodester Pizzafy Ecommerce System 1.0. This vulnerability affects the function delete_menu of the file /admin/ajax.php?action=delete_menu. Executing a manipulation of the argument ID can lead to sql injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| A security flaw has been discovered in SourceCodester Pizzafy Ecommerce System 1.0. This affects the function delete_cart of the file /admin/ajax.php?action=delete_cart. Performing a manipulation of the argument ID results in sql injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY,
as documented in mm/filemap.c:
"If our return value has VM_FAULT_RETRY set, it's because the mmap_lock
may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()."
When this happens, a concurrent munmap() can call remove_vma() and free
the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then
becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call
dereferences it -- a use-after-free.
Fix this by saving ip_blkno as a plain integer before calling
filemap_fault(), and removing vma from the trace event. Since
ip_blkno is copied by value before the lock can be dropped, it
remains valid regardless of what happens to the vma or inode
afterward. |
| A vulnerability was detected in Totolink N300RT 3.4.0-B20250430. The impacted element is the function is_cmd_string_valid of the file /boafrm/formWsc of the component libapmib.so. Performing a manipulation of the argument localPin results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. |
| A security vulnerability has been detected in edvardlindelof notes-mcp up to 0.1.4. This affects an unknown function of the file notes_mcp.py. The manipulation of the argument root_dir/path leads to path traversal. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in Totolink N300RT 3.4.0-B20250430. This affects an unknown function of the file /boafrm/formIpQoS. Executing a manipulation of the argument entry_name can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. |
| A stack buffer overflow exists in wolfSSL's PKCS7 implementation in the wc_PKCS7_DecryptOri() function in wolfcrypt/src/pkcs7.c. When processing a CMS EnvelopedData message containing an OtherRecipientInfo (ORI) recipient, the function copies an ASN.1-parsed OID into a fixed 32-byte stack buffer (oriOID[MAX_OID_SZ]) via XMEMCPY without first validating that the parsed OID length does not exceed MAX_OID_SZ. A crafted CMS EnvelopedData message with an ORI recipient containing an OID longer than 32 bytes triggers a stack buffer overflow. Exploitation requires the library to be built with --enable-pkcs7 (disabled by default) and the application to have registered an ORI decrypt callback via wc_PKCS7_SetOriDecryptCb(). |
| OpenClaw before 2026.3.28 contains an SSRF guard bypass vulnerability that fails to block four IPv6 special-use ranges. Attackers can exploit this by crafting URLs targeting internal or non-routable IPv6 addresses to bypass SSRF protections. |
| A vulnerability was detected in ef10007 MLOps_MCP 1.0.0. This impacts an unknown function of the file fastmcp_server.py of the component save_file Tool. The manipulation of the argument filename/destination results in path traversal. The attack may be performed from remote. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
