| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Redon Hub is a Roblox Product Delivery Bot, also known as a Hub. In all hubs before version 1.0.2, all commands are capable of being ran by all users, including admin commands. This allows users to receive products for free and delete/create/update products/tags/etc. The only non-affected command is `/products admin clear` as this was already programmed for bot owners only. All users should upgrade to version 1.0.2 to receive a patch. |
| Improper access control in some Intel(R) Ethernet Adapters and Intel(R) Ethernet Controller I225 Manageability firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| Unauth. Reflected Cross-Site Scripting vulnerability in Daniel Powney Multi Rating plugin <= 5.0.5 versions. |
| httparty is an API tool. In versions 0.23.2 and prior, httparty is vulnerable to SSRF. This issue can pose a risk of leaking API keys, and it can also allow third parties to issue requests to internal servers. This issue has been patched via commit 0529bcd. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: aio_iiro_16: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl812: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode. |
| Cybersecurity Nozomi Networks Labs, a specialized security company focused on Industrial Control Systems (ICS) and OT/IoT security, has discovered a vulnerability in Device Manager that a hardcoded encryption key for sensitive information. An attacker can use key to decrypt sensitive information. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: nbpfaxi: Fix memory corruption in probe()
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Validate the size of the received input buffer
Add buffer_recv_size to store the size of the received bytes.
Validate buffer_recv_size in send_usb_cmd(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: prevent A-MSDU attacks in mesh networks
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdf
https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx |
| A vulnerability was determined in FeehiCMS up to 2.1.1. Impacted is an unknown function of the file frontend/web/timthumb.php of the component TimThumb. Executing manipulation of the argument src can lead to server-side request forgery. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in cifs_oplock_break
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in devs.path
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner. |
| Buffer Overflow vulenrability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavcodec/jpegxl_parser.c in gen_alias_map. |
| In the Linux kernel, the following vulnerability has been resolved:
net: appletalk: Fix use-after-free in AARP proxy probe
The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock. During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.
race condition:
cpu 0 | cpu 1
atalk_sendmsg() | atif_proxy_probe_device()
aarp_send_ddp() | aarp_proxy_probe_network()
mod_timer() | lock(aarp_lock) // LOCK!!
timeout around 200ms | alloc(aarp_entry)
and then call | proxies[hash] = aarp_entry
aarp_expire_timeout() | aarp_send_probe()
| unlock(aarp_lock) // UNLOCK!!
lock(aarp_lock) // LOCK!! | msleep(100);
__aarp_expire_timer(&proxies[ct]) |
free(aarp_entry) |
unlock(aarp_lock) // UNLOCK!! |
| lock(aarp_lock) // LOCK!!
| UAF aarp_entry !!
==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278
CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc1/0x630 mm/kasan/report.c:521
kasan_report+0xca/0x100 mm/kasan/report.c:634
aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
sock_do_ioctl+0xdc/0x260 net/socket.c:1190
sock_ioctl+0x239/0x6a0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated:
aarp_alloc net/appletalk/aarp.c:382 [inline]
aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
Freed:
kfree+0x148/0x4d0 mm/slub.c:4841
__aarp_expire net/appletalk/aarp.c:90 [inline]
__aarp_expire_timer net/appletalk/aarp.c:261 [inline]
aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317
The buggy address belongs to the object at ffff8880123aa300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)
Memory state around the buggy address:
ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
================================================================== |
| Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavutil/imgutils.c:353:9 in image_copy_plane. |
| A vulnerability has been found in code-projects Simple Leave Manager 1.0. Affected by this vulnerability is an unknown functionality of the file /request.php. Such manipulation of the argument staff_id leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
