Filtered by vendor Redhat
Subscriptions
Total
23057 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47454 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. | ||||
| CVE-2021-47457 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible() Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. | ||||
| CVE-2021-47491 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: khugepaged: skip huge page collapse for special files The read-only THP for filesystems will collapse THP for files opened readonly and mapped with VM_EXEC. The intended usecase is to avoid TLB misses for large text segments. But it doesn't restrict the file types so a THP could be collapsed for a non-regular file, for example, block device, if it is opened readonly and mapped with EXEC permission. This may cause bugs, like [1] and [2]. This is definitely not the intended usecase, so just collapse THP for regular files in order to close the attack surface. [shy828301@gmail.com: fix vm_file check [3]] | ||||
| CVE-2021-47492 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm, thp: bail out early in collapse_file for writeback page Currently collapse_file does not explicitly check PG_writeback, instead, page_has_private and try_to_release_page are used to filter writeback pages. This does not work for xfs with blocksize equal to or larger than pagesize, because in such case xfs has no page->private. This makes collapse_file bail out early for writeback page. Otherwise, xfs end_page_writeback will panic as follows. page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:ffff0003f88c86a8 index:0x0 pfn:0x84ef32 aops:xfs_address_space_operations [xfs] ino:30000b7 dentry name:"libtest.so" flags: 0x57fffe0000008027(locked|referenced|uptodate|active|writeback) raw: 57fffe0000008027 ffff80001b48bc28 ffff80001b48bc28 ffff0003f88c86a8 raw: 0000000000000000 0000000000000000 00000000ffffffff ffff0000c3e9a000 page dumped because: VM_BUG_ON_PAGE(((unsigned int) page_ref_count(page) + 127u <= 127u)) page->mem_cgroup:ffff0000c3e9a000 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1212! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: BUG: Bad page state in process khugepaged pfn:84ef32 xfs(E) page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:0 index:0x0 pfn:0x84ef32 libcrc32c(E) rfkill(E) aes_ce_blk(E) crypto_simd(E) ... CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Tainted: ... pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: end_page_writeback+0x1c0/0x214 iomap_finish_page_writeback+0x13c/0x204 iomap_finish_ioend+0xe8/0x19c iomap_writepage_end_bio+0x38/0x50 bio_endio+0x168/0x1ec blk_update_request+0x278/0x3f0 blk_mq_end_request+0x34/0x15c virtblk_request_done+0x38/0x74 [virtio_blk] blk_done_softirq+0xc4/0x110 __do_softirq+0x128/0x38c __irq_exit_rcu+0x118/0x150 irq_exit+0x1c/0x30 __handle_domain_irq+0x8c/0xf0 gic_handle_irq+0x84/0x108 el1_irq+0xcc/0x180 arch_cpu_idle+0x18/0x40 default_idle_call+0x4c/0x1a0 cpuidle_idle_call+0x168/0x1e0 do_idle+0xb4/0x104 cpu_startup_entry+0x30/0x9c secondary_start_kernel+0x104/0x180 Code: d4210000 b0006161 910c8021 94013f4d (d4210000) ---[ end trace 4a88c6a074082f8c ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt | ||||
| CVE-2024-43826 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfs: pass explicit offset/count to trace events nfs_folio_length is unsafe to use without having the folio locked and a check for a NULL ->f_mapping that protects against truncations and can lead to kernel crashes. E.g. when running xfstests generic/065 with all nfs trace points enabled. Follow the model of the XFS trace points and pass in an explіcit offset and length. This has the additional benefit that these values can be more accurate as some of the users touch partial folio ranges. | ||||
| CVE-2024-43820 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume rm-raid devices will occasionally trigger the following warning when being resumed after a table load because DM_RECOVERY_RUNNING is set: WARNING: CPU: 7 PID: 5660 at drivers/md/dm-raid.c:4105 raid_resume+0xee/0x100 [dm_raid] The failing check is: WARN_ON_ONCE(test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)); This check is designed to make sure that the sync thread isn't registered, but md_check_recovery can set MD_RECOVERY_RUNNING without the sync_thread ever getting registered. Instead of checking if MD_RECOVERY_RUNNING is set, check if sync_thread is non-NULL. | ||||
| CVE-2023-52881 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-09-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14> +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001 | ||||
| CVE-2024-35235 | 3 Debian, Openprinting, Redhat | 7 Debian Linux, Cups, Enterprise Linux and 4 more | 2025-09-26 | 4.4 Medium |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.8 and earlier, when starting the cupsd server with a Listen configuration item pointing to a symbolic link, the cupsd process can be caused to perform an arbitrary chmod of the provided argument, providing world-writable access to the target. Given that cupsd is often running as root, this can result in the change of permission of any user or system files to be world writable. Given the aforementioned Ubuntu AppArmor context, on such systems this vulnerability is limited to those files modifiable by the cupsd process. In that specific case it was found to be possible to turn the configuration of the Listen argument into full control over the cupsd.conf and cups-files.conf configuration files. By later setting the User and Group arguments in cups-files.conf, and printing with a printer configured by PPD with a `FoomaticRIPCommandLine` argument, arbitrary user and group (not root) command execution could be achieved, which can further be used on Ubuntu systems to achieve full root command execution. Commit ff1f8a623e090dee8a8aadf12a6a4b25efac143d contains a patch for the issue. | ||||
| CVE-2024-57885 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: fix sleeping function called from invalid context at print message Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ #34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information. | ||||
| CVE-2024-27435 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix reconnection fail due to reserved tag allocation We found a issue on production environment while using NVMe over RDMA, admin_q reconnect failed forever while remote target and network is ok. After dig into it, we found it may caused by a ABBA deadlock due to tag allocation. In my case, the tag was hold by a keep alive request waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the request maked as idle and will not process before reset success. As fabric_q shares tagset with admin_q, while reconnect remote target, we need a tag for connect command, but the only one reserved tag was held by keep alive command which waiting inside admin_q. As a result, we failed to reconnect admin_q forever. In order to fix this issue, I think we should keep two reserved tags for admin queue. | ||||
| CVE-2022-48883 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user. | ||||
| CVE-2024-7254 | 3 Google, Netapp, Redhat | 15 Google-protobuf, Protobuf, Protobuf-java and 12 more | 2025-09-26 | 7.5 High |
| Any project that parses untrusted Protocol Buffers data containing an arbitrary number of nested groups / series of SGROUP tags can corrupted by exceeding the stack limit i.e. StackOverflow. Parsing nested groups as unknown fields with DiscardUnknownFieldsParser or Java Protobuf Lite parser, or against Protobuf map fields, creates unbounded recursions that can be abused by an attacker. | ||||
| CVE-2024-27415 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: confirm multicast packets before passing them up the stack conntrack nf_confirm logic cannot handle cloned skbs referencing the same nf_conn entry, which will happen for multicast (broadcast) frames on bridges. Example: macvlan0 | br0 / \ ethX ethY ethX (or Y) receives a L2 multicast or broadcast packet containing an IP packet, flow is not yet in conntrack table. 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting. -> skb->_nfct now references a unconfirmed entry 2. skb is broad/mcast packet. bridge now passes clones out on each bridge interface. 3. skb gets passed up the stack. 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb and schedules a work queue to send them out on the lower devices. The clone skb->_nfct is not a copy, it is the same entry as the original skb. The macvlan rx handler then returns RX_HANDLER_PASS. 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb. The Macvlan broadcast worker and normal confirm path will race. This race will not happen if step 2 already confirmed a clone. In that case later steps perform skb_clone() with skb->_nfct already confirmed (in hash table). This works fine. But such confirmation won't happen when eb/ip/nftables rules dropped the packets before they reached the nf_confirm step in postrouting. Pablo points out that nf_conntrack_bridge doesn't allow use of stateful nat, so we can safely discard the nf_conn entry and let inet call conntrack again. This doesn't work for bridge netfilter: skb could have a nat transformation. Also bridge nf prevents re-invocation of inet prerouting via 'sabotage_in' hook. Work around this problem by explicit confirmation of the entry at LOCAL_IN time, before upper layer has a chance to clone the unconfirmed entry. The downside is that this disables NAT and conntrack helpers. Alternative fix would be to add locking to all code parts that deal with unconfirmed packets, but even if that could be done in a sane way this opens up other problems, for example: -m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4 -m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5 For multicast case, only one of such conflicting mappings will be created, conntrack only handles 1:1 NAT mappings. Users should set create a setup that explicitly marks such traffic NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass them, ruleset might have accept rules for untracked traffic already, so user-visible behaviour would change. | ||||
| CVE-2023-52791 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. | ||||
| CVE-2023-52813 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask. The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again. v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask. | ||||
| CVE-2023-52834 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. | ||||
| CVE-2024-35824 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). | ||||
| CVE-2024-27434 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't set the MFP flag for the GTK The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible. | ||||
| CVE-2024-35787 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix incorrect usage for sb_index Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the bitmap file") removed page->index from bitmap code, but left wrong code logic for clustered-md. current code never set slot offset for cluster nodes, will sometimes cause crash in clustered env. Call trace (partly): md_bitmap_file_set_bit+0x110/0x1d8 [md_mod] md_bitmap_startwrite+0x13c/0x240 [md_mod] raid1_make_request+0x6b0/0x1c08 [raid1] md_handle_request+0x1dc/0x368 [md_mod] md_submit_bio+0x80/0xf8 [md_mod] __submit_bio+0x178/0x300 submit_bio_noacct_nocheck+0x11c/0x338 submit_bio_noacct+0x134/0x614 submit_bio+0x28/0xdc submit_bh_wbc+0x130/0x1cc submit_bh+0x1c/0x28 | ||||
| CVE-2024-35794 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() to md_stop_writes(). 2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen, it only prevent new sync_thread to start, and it can't stop the running sync thread; In order to frozen sync_thread, after seting the flag, stop_sync_thread() should be used. 3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use it as condition for md_stop_writes() in raid_postsuspend() doesn't look correct. Consider that reentrant stop_sync_thread() do nothing, always call md_stop_writes() in raid_postsuspend(). 4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime, and if MD_RECOVERY_FROZEN is cleared while the array is suspended, new sync_thread can start unexpected. Fix this by disallow raid_message() to change sync_thread status during suspend. Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(), and with previous fixes, the test won't hang there anymore, however, the test will still fail and complain that ext4 is corrupted. And with this patch, the test won't hang due to stop_sync_thread() or fail due to ext4 is corrupted anymore. However, there is still a deadlock related to dm-raid456 that will be fixed in following patches. | ||||