| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| A flaw was found in libsoup. SoupContentSniffer may be vulnerable to a NULL pointer dereference in the sniff_mp4 function. The HTTP server may cause the libsoup client to crash. |
| A flaw was found in libsoup. The implementation of HTTP range requests is vulnerable to a resource consumption attack. This flaw allows a malicious client to request the same range many times in a single HTTP request, causing the server to use large amounts of memory. This does not allow for a full denial of service. |
| A flaw was found in github.com/go-viper/mapstructure/v2, in the field processing component using mapstructure.WeakDecode. This vulnerability allows information disclosure through detailed error messages that may leak sensitive input values via malformed user-supplied data processed in security-critical contexts. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.16.11, a bug in a mod_auth_openidc results in disclosure of protected content to unauthenticated users. The conditions for disclosure are an OIDCProviderAuthRequestMethod POST, a valid account, and there mustn't be any application-level gateway (or load balancer etc) protecting the server. When you request a protected resource, the response includes the HTTP status, the HTTP headers, the intended response (the self-submitting form), and the protected resource (with no headers). This is an example of a request for a protected resource, including all the data returned. In the case where mod_auth_openidc returns a form, it has to return OK from check_userid so as not to go down the error path in httpd. This means httpd will try to issue the protected resource. oidc_content_handler is called early, which has the opportunity to prevent the normal output being issued by httpd. oidc_content_handler has a number of checks for when it intervenes, but it doesn't check for this case, so the handler returns DECLINED. Consequently, httpd appends the protected content to the response. The issue has been patched in mod_auth_openidc versions >= 2.4.16.11. |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. |
| A flaw was found in Yggdrasil, which acts as a system broker, allowing the processes to communicate to other children's "worker" processes through the DBus component. Yggdrasil creates a DBus method to dispatch messages to workers. However, it misses authentication and authorization checks, allowing every system user to call it. One available Yggdrasil worker acts as a package manager with capabilities to create and enable new repositories and install or remove packages.
This flaw allows an attacker with access to the system to leverage the lack of authentication on the dispatch message to force the Yggdrasil worker to install arbitrary RPM packages. This issue results in local privilege escalation, enabling the attacker to access and modify sensitive system data. |
| A flaw was found in systems utilizing LUKS-encrypted disks with GRUB configured for TPM-based auto-decryption. When GRUB is set to automatically decrypt disks using keys stored in the TPM, it reads the decryption key into system memory. If an attacker with physical access can corrupt the underlying filesystem superblock, GRUB will fail to locate a valid filesystem and enter rescue mode. At this point, the disk is already decrypted, and the decryption key remains loaded in system memory. This scenario may allow an attacker with physical access to access the unencrypted data without any further authentication, thereby compromising data confidentiality. Furthermore, the ability to force this state through filesystem corruption also presents a data integrity concern. |
| A flaw was found in the cookie parsing logic of the libsoup HTTP library, used in GNOME applications and other software. The vulnerability arises when processing the expiration date of cookies, where a specially crafted value can trigger an integer overflow. This may result in undefined behavior, allowing an attacker to bypass cookie expiration logic, causing persistent or unintended cookie behavior. The issue stems from improper validation of large integer inputs during date arithmetic operations within the cookie parsing routines. |
| A flaw was found in the soup_multipart_new_from_message() function of the libsoup HTTP library, which is commonly used by GNOME and other applications to handle web communications. The issue occurs when the library processes specially crafted multipart messages. Due to improper validation, an internal calculation can go wrong, leading to an integer underflow. This can cause the program to access invalid memory and crash. As a result, any application or server using libsoup could be forced to exit unexpectedly, creating a denial-of-service (DoS) risk. |
| A flaw was found in the libreswan client plugin for NetworkManager (NetkworkManager-libreswan), where it fails to properly sanitize the VPN configuration from the local unprivileged user. In this configuration, composed by a key-value format, the plugin fails to escape special characters, leading the application to interpret values as keys. One of the most critical parameters that could be abused by a malicious user is the `leftupdown`key. This key takes an executable command as a value and is used to specify what executes as a callback in NetworkManager-libreswan to retrieve configuration settings back to NetworkManager. As NetworkManager uses Polkit to allow an unprivileged user to control the system's network configuration, a malicious actor could achieve local privilege escalation and potential code execution as root in the targeted machine by creating a malicious configuration. |
| A flaw was found in QEMU, in the virtio-scsi, virtio-blk, and virtio-crypto devices. The size for virtqueue_push as set in virtio_scsi_complete_req / virtio_blk_req_complete / virito_crypto_req_complete could be larger than the true size of the data which has been sent to guest. Once virtqueue_push() finally calls dma_memory_unmap to ummap the in_iov, it may call the address_space_write function to write back the data. Some uninitialized data may exist in the bounce.buffer, leading to an information leak. |
| glib-networking's OpenSSL backend fails to properly check the return value of a call to BIO_write(), resulting in an out of bounds read. |
| A flaw was found in libsoup, where the soup_headers_parse_request() function may be vulnerable to an out-of-bound read. This flaw allows a malicious user to use a specially crafted HTTP request to crash the HTTP server. |
| Improper input validation in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| gorilla/schema converts structs to and from form values. Prior to version 1.4.1 Running `schema.Decoder.Decode()` on a struct that has a field of type `[]struct{...}` opens it up to malicious attacks regarding memory allocations, taking advantage of the sparse slice functionality. Any use of `schema.Decoder.Decode()` on a struct with arrays of other structs could be vulnerable to this memory exhaustion vulnerability. Version 1.4.1 contains a patch for the issue. |
| A flaw was found in Ansible-Core. This vulnerability allows attackers to bypass unsafe content protections using the hostvars object to reference and execute templated content. This issue can lead to arbitrary code execution if remote data or module outputs are improperly templated within playbooks. |
