| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sma1307: fix double free of devm_kzalloc() memory
A previous change added NULL checks and cleanup for allocation
failures in sma1307_setting_loaded().
However, the cleanup for mode_set entries is wrong. Those entries are
allocated with devm_kzalloc(), so they are device-managed resources and
must not be freed with kfree(). Manually freeing them in the error path
can lead to a double free when devres later releases the same memory.
Drop the manual kfree() loop and let devres handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
team: fix header_ops type confusion with non-Ethernet ports
Similar to commit 950803f72547 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.
For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.
The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.
Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.
Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.4.3, an off-by-one out-of-bounds read vulnerability in bacnet-stack's ReadPropertyMultiple service decoder allows unauthenticated remote attackers to read one byte past an allocated buffer boundary by sending a crafted RPM request with a truncated object identifier. The vulnerability is in rpm_decode_object_id(), which checks apdu_len < 5 but then accesses all 6 byte positions (indices 0-5) — consuming 1 byte for the context tag, 4 bytes for the object ID, then reading apdu[5] for the opening tag check. A 5-byte input passes the length check but causes a 1-byte OOB read, leading to crashes on embedded BACnet devices. The vulnerability exists in src/bacnet/rpm.c and affects any deployment that enables the ReadPropertyMultiple confirmed service handler (enabled by default in the reference server). This vulnerability is fixed in 1.4.3. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.4.3, an out-of-bounds read vulnerability in bacnet-stack's ReadPropertyMultiple service property decoder allows unauthenticated remote attackers to read past allocated buffer boundaries by sending an RPM request with a truncated property list. The vulnerability stems from rpm_decode_object_property() calling the deprecated decode_tag_number_and_value() function at src/bacnet/rpm.c:344, which accepts no buffer length parameter and reads blindly from whatever pointer it receives. A crafted BACnet/IP packet with a 1-byte property payload containing an extended tag marker (0xF9) causes the decoder to read 1 byte past the end of the buffer, leading to crashes on embedded BACnet devices. The vulnerability exists in src/bacnet/rpm.c and affects any deployment that enables the ReadPropertyMultiple confirmed service handler (enabled by default in the reference server). This vulnerability is fixed in 1.4.3. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Nelio Software Nelio Content nelio-content allows Blind SQL Injection.This issue affects Nelio Content: from n/a through <= 4.2.0. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in omnipressteam Omnipress omnipress allows PHP Local File Inclusion.This issue affects Omnipress: from n/a through <= 1.6.7. |
| Yadea T5 Electric Bicycles (models manufactured in/after 2024) have a weak authentication mechanism in their keyless entry system. The system utilizes the EV1527 fixed-code RF protocol without implementing rolling codes or cryptographic challenge-response mechanisms. This is vulnerable to signal forgery after a local attacker intercepts any legitimate key fob transmission, allowing for complete unauthorized vehicle operation via a replay attack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| A vulnerability has been found in dmitryglhf mcp-url-downloader up to 4b8cf2de55f6e8864a77d108e8a94a5b8e4394c6. Affected by this issue is the function _validate_url_safe of the file src/mcp_url_downloader/server.py. Such manipulation of the argument url leads to server-side request forgery. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A zip slip vulnerability in the Admin import functionality of CTFd v3.8.1-18-gdb5a18c4 allows attackers to write arbitrary files outside the intended directories via supplying a crafted import. |
| The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Privilege Escalation in versions up to and including 5.4.1. This is due to a missing authorization check in the execute() method of the connect-customer-to-wp-user ability, which only requires the customer__edit capability granted to the latepoint_agent role by default, without verifying whether the target WordPress user ID belongs to a privileged account. This makes it possible for authenticated attackers with the latepoint_agent role to link any LatePoint customer record to an administrator's WordPress account and subsequently reset the administrator's password via the normal customer password-reset flow, resulting in full site takeover. |
| A vulnerability was detected in SourceCodester Pharmacy Sales and Inventory System 1.0. Affected by this vulnerability is an unknown functionality of the file /ajax.php?action=delete_product. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in saeros1984 Neoforum neoforum allows Blind SQL Injection.This issue affects Neoforum: from n/a through <= 1.0. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix use of completion ctx after free
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context. |
| An out-of-bounds memory access vulnerability exists in specific firmware versions of Milesight AIOT cameras. |
| Improper use of the static-eval npm package in the open source solution qnabot-on-aws versions 7.2.4 and earlier may allow an authenticated administrator to execute arbitrary code within the fulfillment Lambda execution context by injecting a crafted conditional chaining expression via the Content Designer interface, which bypasses the intended expression sandbox through JavaScript prototype manipulation. This may grant direct access to backend resources (Lambda environment variables, OpenSearch indices, S3 objects, DynamoDB tables) that are not exposed through normal administrative interfaces.
We recommend you upgrade to version 7.3.0 or above. |
| A security flaw has been discovered in dubydu sqlite-mcp up to 0.1.0. The affected element is the function extract_to_json of the file src/entry.py. Performing a manipulation of the argument output_filename results in sql injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The patch is named a5580cb992f4f6c308c9ffe6442b2e76709db548. Applying a patch is the recommended action to fix this issue. |
| A weak key generation vulnerability exists in specific firmware versions of Milesight AIOT cameras allows authorization to be bypassed. |
