| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix NULL event access and potential PEBS record loss
When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the
perf_event_overflow() could be called to process the last PEBS record.
While perf_event_overflow() could trigger the interrupt throttle and
stop all events of the group, like what the below call-chain shows.
perf_event_overflow()
-> __perf_event_overflow()
->__perf_event_account_interrupt()
-> perf_event_throttle_group()
-> perf_event_throttle()
-> event->pmu->stop()
-> x86_pmu_stop()
The side effect of stopping the events is that all corresponding event
pointers in cpuc->events[] array are cleared to NULL.
Assume there are two PEBS events (event a and event b) in a group. When
intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the
last PEBS record of PEBS event a, interrupt throttle is triggered and
all pointers of event a and event b are cleared to NULL. Then
intel_pmu_drain_pebs_icl() tries to process the last PEBS record of
event b and encounters NULL pointer access.
To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop()
to x86_pmu_del(). It's safe since cpuc->active_mask or
cpuc->pebs_enabled is always checked before access the event pointer
from cpuc->events[]. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Define a proc_layoutcommit for the FlexFiles layout type
Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT
operation on a FlexFiles layout. |
| In the Linux kernel, the following vulnerability has been resolved:
md: avoid repeated calls to del_gendisk
There is a uaf problem which is found by case 23rdev-lifetime:
Oops: general protection fault, probably for non-canonical address 0xdead000000000122
RIP: 0010:bdi_unregister+0x4b/0x170
Call Trace:
<TASK>
__del_gendisk+0x356/0x3e0
mddev_unlock+0x351/0x360
rdev_attr_store+0x217/0x280
kernfs_fop_write_iter+0x14a/0x210
vfs_write+0x29e/0x550
ksys_write+0x74/0xf0
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff5250a177e
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: NFSv4 file creation neglects setting ACL
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
"struct sdca_control" declares "values" field as integer array.
But the memory allocated to it is of char array. This causes
crash for sdca_parse_function API. This patch addresses the
issue by allocating correct data size. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: avoid SBSA UART accessing DMACR register
Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.
When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon
This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.
[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()
Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.
Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.
[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
<TASK>
pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
... |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/pageattr: Propagate return value from __change_memory_common
The rodata=on security measure requires that any code path which does
vmalloc -> set_memory_ro/set_memory_rox must protect the linear map alias
too. Therefore, if such a call fails, we must abort set_memory_* and caller
must take appropriate action; currently we are suppressing the error, and
there is a real chance of such an error arising post commit a166563e7ec3
("arm64: mm: support large block mapping when rodata=full"). Therefore,
propagate any error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync
Use-after-free can occur in hci_disconnect_all_sync if a connection is
deleted by concurrent processing of a controller event.
To prevent this the code now tries to iterate over the list backwards
to ensure the links are cleanup before its parents, also it no longer
relies on a cursor, instead it always uses the last element since
hci_abort_conn_sync is guaranteed to call hci_conn_del.
UAF crash log:
==================================================================
BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124
CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xdd/0x160
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
kasan_report+0xa6/0xe0
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
? __pfx_lock_release+0x10/0x10
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_cmd_sync_work+0x137/0x220 [bluetooth]
process_one_work+0x526/0x9d0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x1a/0x90
worker_thread+0x92/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x196/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 1782:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
hci_conn_add+0xa5/0xa80 [bluetooth]
hci_bind_cis+0x881/0x9b0 [bluetooth]
iso_connect_cis+0x121/0x520 [bluetooth]
iso_sock_connect+0x3f6/0x790 [bluetooth]
__sys_connect+0x109/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 695:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x10a/0x180
__kmem_cache_free+0x14d/0x2e0
device_release+0x5d/0xf0
kobject_put+0xdf/0x270
hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
hci_event_packet+0x579/0x7e0 [bluetooth]
hci_rx_work+0x287/0xaa0 [bluetooth]
process_one_work+0x526/0x9d0
worker_thread+0x92/0x630
kthread+0x196/0x1e0
ret_from_fork+0x2c/0x50
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set page extent mapped after read_folio in relocate_one_page
One of the CI runs triggered the following panic
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
sp : ffff800093213720
x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000
x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff
x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880
x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff
x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028
x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000
x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c
x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8
x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_set_dirty+0x38/0xa0
btrfs_page_set_dirty+0x58/0x88
relocate_one_page+0x204/0x5f0
relocate_file_extent_cluster+0x11c/0x180
relocate_data_extent+0xd0/0xf8
relocate_block_group+0x3d0/0x4e8
btrfs_relocate_block_group+0x2d8/0x490
btrfs_relocate_chunk+0x54/0x1a8
btrfs_balance+0x7f4/0x1150
btrfs_ioctl+0x10f0/0x20b8
__arm64_sys_ioctl+0x120/0x11d8
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x158
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x194/0x198
Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000)
This is the same problem outlined in 17b17fcd6d44 ("btrfs:
set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the
fix is the same. I originally looked for the same pattern elsewhere in
our code, but mistakenly skipped over this code because I saw the page
cache readahead before we set_page_extent_mapped, not realizing that
this was only in the !page case, that we can still end up with a
!uptodate page and then do the btrfs_read_folio further down.
The fix here is the same as the above mentioned patch, move the
set_page_extent_mapped call to after the btrfs_read_folio() block to
make sure that we have the subpage blocksize stuff setup properly before
using the page. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname
TCP_Server_Info::hostname may be updated once or many times during
reconnect, so protect its access outside reconnect path as well and
then prevent any potential use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: ip22zilog: Use platform device for probing
After commit 84a9582fd203 ("serial: core: Start managing serial controllers
to enable runtime PM") serial drivers need to provide a device in
struct uart_port.dev otherwise an oops happens. To fix this issue
for ip22zilog driver switch driver to a platform driver and setup
the serial device in sgi-ip22 code. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/spinlock/debug: Fix data-race in do_raw_write_lock
KCSAN reports:
BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lock
write (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1:
do_raw_write_lock+0x120/0x204
_raw_write_lock_irq
do_exit
call_usermodehelper_exec_async
ret_from_fork
read to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0:
do_raw_write_lock+0x88/0x204
_raw_write_lock_irq
do_exit
call_usermodehelper_exec_async
ret_from_fork
value changed: 0xffffffff -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111
Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") has
adressed most of these races, but seems to be not consistent/not complete.
>From do_raw_write_lock() only debug_write_lock_after() part has been
converted to WRITE_ONCE(), but not debug_write_lock_before() part.
Do it now. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Don't free uninitialized ksz_irq
If something goes wrong at setup, ksz_irq_free() can be called on
uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It
leads to freeing uninitialized IRQ numbers and/or domains.
Use dsa_switch_for_each_user_port_continue_reverse() in the error path
to iterate only over the fully initialized ports. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: at91-pio4: check return value of devm_kasprintf()
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks")
Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int") |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: apple-admac: Fix 'current_tx' not getting freed
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix NULL pointer deference when splitting folio
Commit c010d47f107f ("mm: thp: split huge page to any lower order pages")
introduced an early check on the folio's order via mapping->flags before
proceeding with the split work.
This check introduced a bug: for shmem folios in the swap cache and
truncated folios, the mapping pointer can be NULL. Accessing
mapping->flags in this state leads directly to a NULL pointer dereference.
This commit fixes the issue by moving the check for mapping != NULL before
any attempt to access mapping->flags. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: stm32-usphyc: Fix off by one in probe()
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Fix memory leak in rsi_coex_attach()
The coex_cb needs to be freed when rsi_create_kthread() failed in
rsi_coex_attach(). |
