| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential deadlock with newly created symlinks
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c39 ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/entry_32: Clear CPU buffers after register restore in NMI return
CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use raw_spinlock_t in ringbuf
The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace+0xac/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0xac/0xe8
dump_stack+0x18/0x30
__might_resched+0x3bc/0x4fc
rt_spin_lock+0x8c/0x1a4
__bpf_ringbuf_reserve+0xc4/0x254
bpf_ringbuf_reserve_dynptr+0x5c/0xdc
bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
trace_call_bpf+0x238/0x774
perf_call_bpf_enter.isra.0+0x104/0x194
perf_syscall_enter+0x2f8/0x510
trace_sys_enter+0x39c/0x564
syscall_trace_enter+0x220/0x3c0
do_el0_svc+0x138/0x1dc
el0_svc+0x54/0x130
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Switch the spinlock to raw_spinlock_t to avoid this error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video
is leading to black screens for around 1 second and kernel WARNING [1] traces
when calling dmub_psr_enable() with Parade 08-01 TCON.
These symptoms all go away with PSR-SU disabled for this TCON, so disable
it for now while DMUB traces [2] from the failure can be analyzed and the failure
state properly root caused.
(cherry picked from commit afb634a6823d8d9db23c5fb04f79c5549349628b) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
There is a history of deadlock if reboot is performed at the beginning
of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS
shutdown, and at that time the audio driver was waiting on
blk_mq_submit_bio() holding a mutex_lock while reading the fw binary.
After that, a deadlock issue occurred while audio driver shutdown was
waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set
SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down
after a UFS shutdown will return an error.
[ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown]
[ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49]
[ 31.907806]I[0: swapper/0: 0] Call trace:
[ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338
[ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc
[ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8
[ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40
[ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac
[ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24
[ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec
[ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280
[ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c
[ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280
[ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158
[ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4
[ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0
[ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0
[ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4
[ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4
[ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter]
[ 31.908783]I[0: swapper/0: 0] Call trace:
[ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338
[ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc
[ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8
[ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178
[ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c
[ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix multiple init when debugfs is disabled
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the
duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...
This change removes the early return. The check for iso_debugfs being
NULL was unnecessary, it is always NULL when iso_inited is false. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if we need to reschedule during overflow flush
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: wd33c93: Don't use stale scsi_pointer value
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: remove unreasonable unlock in ocfs2_read_blocks
Patch series "Misc fixes for ocfs2_read_blocks", v5.
This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix
the issue reported by syzbot, which detects bad unlock balance in
ocfs2_read_blocks(). The second patch fixes an issue reported by Heming
Zhao when reviewing above fix.
This patch (of 2):
There was a lock release before exiting, so remove the unreasonable unlock. |
| In the Linux kernel, the following vulnerability has been resolved:
static_call: Replace pointless WARN_ON() in static_call_module_notify()
static_call_module_notify() triggers a WARN_ON(), when memory allocation
fails in __static_call_add_module().
That's not really justified, because the failure case must be correctly
handled by the well known call chain and the error code is passed
through to the initiating userspace application.
A memory allocation fail is not a fatal problem, but the WARN_ON() takes
the machine out when panic_on_warn is set.
Replace it with a pr_warn(). |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: do not assume bh is held in ppp_channel_bridge_input()
Networking receive path is usually handled from BH handler.
However, some protocols need to acquire the socket lock, and
packets might be stored in the socket backlog is the socket was
owned by a user process.
In this case, release_sock(), __release_sock(), and sk_backlog_rcv()
might call the sk->sk_backlog_rcv() handler in process context.
sybot caught ppp was not considering this case in
ppp_channel_bridge_input() :
WARNING: inconsistent lock state
6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv include/net/sock.h:1111 [inline]
__release_sock+0x1a8/0x3d8 net/core/sock.c:3004
release_sock+0x68/0x1b8 net/core/sock.c:3558
pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x374/0x4f4 net/socket.c:2204
__do_sys_sendto net/socket.c:2216 [inline]
__se_sys_sendto net/socket.c:2212 [inline]
__arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
irq event stamp: 282914
hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline]
hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194
hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162
softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582
softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&pch->downl);
<Interrupt>
lock(&pch->downl);
*** DEADLOCK ***
1 lock held by ksoftirqd/1/24:
#0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325
stack backtrace:
CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call trace:
dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326
__dump_sta
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
blk_iocost: fix more out of bound shifts
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...
Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
Definitely condition dma_get_cache_alignment * defined value > 256
during driver initialization is not reason to BUG_ON(). Turn that to
graceful error out with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Drop rt_mutex::wait_lock before scheduling
rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the
good case it returns with the lock held and in the deadlock case it emits a
warning and goes into an endless scheduling loop with the lock held, which
triggers the 'scheduling in atomic' warning.
Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning
and dropping into the schedule for ever loop.
[ tglx: Moved unlock before the WARN(), removed the pointless comment,
massaged changelog, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
The mcp251x_hw_wake() function is called with the mpc_lock mutex held and
disables the interrupt handler so that no interrupts can be processed while
waking the device. If an interrupt has already occurred then waiting for
the interrupt handler to complete will deadlock because it will be trying
to acquire the same mutex.
CPU0 CPU1
---- ----
mcp251x_open()
mutex_lock(&priv->mcp_lock)
request_threaded_irq()
<interrupt>
mcp251x_can_ist()
mutex_lock(&priv->mcp_lock)
mcp251x_hw_wake()
disable_irq() <-- deadlock
Use disable_irq_nosync() instead because the interrupt handler does
everything while holding the mutex so it doesn't matter if it's still
running. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/aux: Fix AUX buffer serialization
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: cmd-db: Map shared memory as WC, not WB
Linux does not write into cmd-db region. This region of memory is write
protected by XPU. XPU may sometime falsely detect clean cache eviction
as "write" into the write protected region leading to secure interrupt
which causes an endless loop somewhere in Trust Zone.
The only reason it is working right now is because Qualcomm Hypervisor
maps the same region as Non-Cacheable memory in Stage 2 translation
tables. The issue manifests if we want to use another hypervisor (like
Xen or KVM), which does not know anything about those specific mappings.
Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC
removes dependency on correct mappings in Stage 2 tables. This patch
fixes the issue by updating the mapping to MEMREMAP_WC.
I tested this on SA8155P with Xen. |
| Puma is a Ruby/Rack web server built for parallelism. In affected versions clients could clobber values set by intermediate proxies (such as X-Forwarded-For) by providing a underscore version of the same header (X-Forwarded_For). Any users relying on proxy set variables is affected. v6.4.3/v5.6.9 now discards any headers using underscores if the non-underscore version also exists. Effectively, allowing the proxy defined headers to always win. Users are advised to upgrade. Nginx has a underscores_in_headers configuration variable to discard these headers at the proxy level as a mitigation. Any users that are implicitly trusting the proxy defined headers for security should immediately cease doing so until upgraded to the fixed versions. |
