| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix use-after-free when volume resizing failed
There is an use-after-free problem reported by KASAN:
==================================================================
BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735
CPU: 2 PID: 4735 Comm: ubirsvol
Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
ubi_eba_copy_table+0x11f/0x1c0 [ubi]
ubi_resize_volume+0x4f9/0xbc0 [ubi]
ubi_cdev_ioctl+0x701/0x1850 [ubi]
__x64_sys_ioctl+0x11d/0x170
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.
Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
It is stated that ath9k_htc_rx_msg() either frees the provided skb or
passes its management to another callback function. However, the skb is
not freed in case there is no another callback function, and Syzkaller was
able to cause a memory leak. Also minor comment fix.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: populate subvp cmd info only for the top pipe
[Why]
System restart observed while changing the display resolution
to 8k with extended mode. Sytem restart was caused by a page fault.
[How]
When the driver populates subvp info it did it for both the pipes using
vblank which caused an outof bounds array access causing the page fault.
added checks to allow the top pipe only to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: release crypto keyslot before reporting I/O complete
Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key(). However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed. This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.
This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)
There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs. Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix decoder disable pm crash
Can't call pm_runtime_disable when the architecture support sub device for
'dev->pm.dev' is NUll, or will get below crash log.
[ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0
[ 10.771556] lr : __pm_runtime_disable+0x30/0x130
[ 10.771558] sp : ffffffc01e4cb800
[ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8
[ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0
[ 10.771567] x25: 0000000000000002 x24: 0000000000000002
[ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001
[ 10.771573] x21: 0000000000000001 x20: 0000000000000000
[ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18
[ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74
[ 10.771583] x15: 00000000000002ea x14: 0000000000000058
[ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4
[ 10.771590] x11: 0000000000000000 x10: 0000000000000001
[ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4
[ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000
[ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001
[ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001
[ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4
[ 10.771613] Call trace:
[ 10.771617] _raw_spin_lock_irq+0x4c/0xa0
[ 10.771620] __pm_runtime_disable+0x30/0x130
[ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc]
[ 10.771662] platform_drv_probe+0x9c/0xbc
[ 10.771665] really_probe+0x13c/0x3a0
[ 10.771668] driver_probe_device+0x84/0xc0
[ 10.771671] device_driver_attach+0x54/0x78 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix dropping valid root bus resources with .end = zero
On r8a7791/koelsch:
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xc3a34e00 (size 64):
comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
hex dump (first 32 bytes):
b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...]..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<fe3aa979>] __kmalloc+0xf0/0x140
[<34bd6bc0>] resource_list_create_entry+0x18/0x38
[<767046bc>] pci_add_resource_offset+0x20/0x68
[<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390
When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid. This invalidation is done by clearing the
flags, start, and end members.
When adding the initial resources to the bus later, invalid resources are
skipped. Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.
E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:
pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
pci-rcar-gen2 ee090000.pci: PCI: revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]
Fix this by only skipping resources where all of the flags, start, and end
members are zero. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix page fault in ivpu_bo_unbind_all_bos_from_context()
Don't add BO to the vdev->bo_list in ivpu_gem_create_object().
When failure happens inside drm_gem_shmem_create(), the BO is not
fully created and ivpu_gem_bo_free() callback will not be called
causing a deleted BO to be left on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: zynq: Fix refcount leak in zynq_early_slcr_init
of_find_compatible_node() returns a node pointer with refcount incremented,
we should use of_node_put() on error path.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
amdgpu: validate offset_in_bo of drm_amdgpu_gem_va
This is motivated by OOB access in amdgpu_vm_update_range when
offset_in_bo+map_size overflows.
v2: keep the validations in amdgpu_vm_bo_map
v3: add the validations to amdgpu_vm_bo_map/amdgpu_vm_bo_replace_map
rather than to amdgpu_gem_va_ioctl |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: hisi: Fix potential UAF in OPP handling
Ensure all required data is acquired before calling dev_pm_opp_put(opp)
to maintain correct resource acquisition and release order. |
| In the Linux kernel, the following vulnerability has been resolved:
loop: loop_set_status_from_info() check before assignment
In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should
be checked before reassignment, because if an overflow error occurs, the
original correct value will be changed to the wrong value, and it will not
be changed back.
More, the original patch did not solve the problem, the value was set and
ioctl returned an error, but the subsequent io used the value in the loop
driver, which still caused an alarm:
loop_handle_cmd
do_req_filebacked
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
lo_rw_aio
cmd->iocb.ki_pos = pos |
| In the Linux kernel, the following vulnerability has been resolved:
block/rq_qos: protect rq_qos apis with a new lock
commit 50e34d78815e ("block: disable the elevator int del_gendisk")
move rq_qos_exit() from disk_release() to del_gendisk(), this will
introduce some problems:
1) If rq_qos_add() is triggered by enabling iocost/iolatency through
cgroupfs, then it can concurrent with del_gendisk(), it's not safe to
write 'q->rq_qos' concurrently.
2) Activate cgroup policy that is relied on rq_qos will call
rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is
called in the middle, null-ptr-dereference will be triggered in
blkcg_activate_policy().
3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the
disk, then if rq_qos_exit() from del_gendisk() is done before
rq_qos_add(), then memory will be leaked.
This patch add a new disk level mutex 'rq_qos_mutex':
1) The lock will protect rq_qos_exit() directly.
2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be
called from disk initialization for now because wbt can't be
destructed until rq_qos_exit(), so it's safe not to protect wbt for
now. Hoever, in case that rq_qos dynamically destruction is supported
in the furture, this patch also protect rq_qos_add() from wbt_init()
directly, this is enough because blk-sysfs already synchronize
writers with disk removal.
3) For iocost and iolatency, in order to synchronize disk removal and
cgroup configuration, the lock is held after blkdev_get_no_open()
from blkg_conf_open_bdev(), and is released in blkg_conf_exit().
In order to fix the above memory leak, disk_live() is checked after
holding the new lock. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: annotate lockless accesses to nlk->max_recvmsg_len
syzbot reported a data-race in data-race in netlink_recvmsg() [1]
Indeed, netlink_recvmsg() can be run concurrently,
and netlink_dump() also needs protection.
[1]
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
read to 0xffff888141840b38 of 8 bytes by task 23057 on cpu 0:
netlink_recvmsg+0xea/0x730 net/netlink/af_netlink.c:1988
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
__sys_recvfrom+0x1ee/0x2e0 net/socket.c:2194
__do_sys_recvfrom net/socket.c:2212 [inline]
__se_sys_recvfrom net/socket.c:2208 [inline]
__x64_sys_recvfrom+0x78/0x90 net/socket.c:2208
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffff888141840b38 of 8 bytes by task 23037 on cpu 1:
netlink_recvmsg+0x114/0x730 net/netlink/af_netlink.c:1989
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
____sys_recvmsg+0x156/0x310 net/socket.c:2720
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0x0000000000001000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23037 Comm: syz-executor.2 Not tainted 6.3.0-rc4-syzkaller-00195-g5a57b48fdfcb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()
KSAN reports use-after-free in hci_add_adv_monitor().
While adding an adv monitor,
hci_add_adv_monitor() calls ->
msft_add_monitor_pattern() calls ->
msft_add_monitor_sync() calls ->
msft_le_monitor_advertisement_cb() calls in an error case ->
hci_free_adv_monitor() which frees the *moniter.
This is referenced by bt_dev_dbg() in hci_add_adv_monitor().
Fix the bt_dev_dbg() by using handle instead of monitor->handle. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix improper freeing of purex item
In qla2xxx_process_purls_iocb(), an item is allocated via
qla27xx_copy_multiple_pkt(), which internally calls
qla24xx_alloc_purex_item().
The qla24xx_alloc_purex_item() function may return a pre-allocated item
from a per-adapter pool for small allocations, instead of dynamically
allocating memory with kzalloc().
An error handling path in qla2xxx_process_purls_iocb() incorrectly uses
kfree() to release the item. If the item was from the pre-allocated
pool, calling kfree() on it is a bug that can lead to memory corruption.
Fix this by using the correct deallocation function,
qla24xx_free_purex_item(), which properly handles both dynamically
allocated and pre-allocated items. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix null-ptr-deref in raid10_sync_request
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix NULL ptr deref by checking new_crtc_state
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
(cherry picked from commit 1d5b09f8daf859247a1ea65b0d732a24d88980d8) |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix NULL-deref on snapshot tear down
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Patchwork: https://patchwork.freedesktop.org/patch/525099/ |
| In the Linux kernel, the following vulnerability has been resolved:
dccp: fix data-race around dp->dccps_mss_cache
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked. |
