| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: free unused skb to prevent memory leak
This avoid potential memory leak under power saving mode. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.
The issue is fixed by using a managed clock. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix memleak in alloc_ns()
After changes in commit a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.
This maybe leak some info through network because not initialize the
message body.
After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: rio: fix possible name leak in rio_register_mport()
If device_register() returns error, the name allocated by dev_set_name()
need be freed. It should use put_device() to give up the reference in the
error path, so that the name can be freed in kobject_cleanup(), and
list_del() is called to delete the port from rio_mports. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: fix use-after-free caused by uec->work
The delayed work uec->work is scheduled in gaokun_ucsi_probe()
but never properly canceled in gaokun_ucsi_remove(). This creates
use-after-free scenarios where the ucsi and gaokun_ucsi structure
are freed after ucsi_destroy() completes execution, while the
gaokun_ucsi_register_worker() might be either currently executing
or still pending in the work queue. The already-freed gaokun_ucsi
or ucsi structure may then be accessed.
Furthermore, the race window is 3 seconds, which is sufficiently
long to make this bug easily reproducible. The following is the
trace captured by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630
Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0
...
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x114/0x580
kasan_report+0xa4/0xf0
__asan_report_store8_noabort+0x20/0x2c
__run_timers+0x5ec/0x630
run_timer_softirq+0xe8/0x1cc
handle_softirqs+0x294/0x720
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x30/0x48
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x27c/0x364
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x40/0x60
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
arch_local_irq_enable+0x4/0x8 (P)
do_idle+0x334/0x458
cpu_startup_entry+0x60/0x70
rest_init+0x158/0x174
start_kernel+0x2f8/0x394
__primary_switched+0x8c/0x94
Allocated by task 72 on cpu 0 at 27.510341s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
kasan_save_alloc_info+0x40/0x54
__kasan_kmalloc+0xa0/0xb8
__kmalloc_node_track_caller_noprof+0x1c0/0x588
devm_kmalloc+0x7c/0x1c8
gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8
really_probe+0x17c/0x5b8
__driver_probe_device+0x158/0x2c4
driver_probe_device+0x10c/0x264
__device_attach_driver+0x168/0x2d0
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x368
device_initial_probe+0x14/0x20
bus_probe_device+0x120/0x150
device_add+0xb3c/0x10fc
__auxiliary_device_add+0x88/0x130
...
Freed by task 73 on cpu 1 at 28.910627s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
__kasan_save_free_info+0x4c/0x74
__kasan_slab_free+0x60/0x8c
kfree+0xd4/0x410
devres_release_all+0x140/0x1f0
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x344/0x460
device_release_driver+0x18/0x24
bus_remove_device+0x198/0x274
device_del+0x310/0xa84
...
The buggy address belongs to the object at ffff00000ec28c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 200 bytes inside of
freed 512-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff)
page_type: f5(slab)
raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
================================================================
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm clone: Fix UAF in clone_dtr()
Dm_clone also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in clone_dtr(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Check whether transferred 2D BO is shmem
Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
at91_adc_interrupt can call at91_adc_touch_data_handler function
to start the work by schedule_work(&st->touch_st.workq).
If we remove the module which will call at91_adc_remove to
make cleanup, it will free indio_dev through iio_device_unregister but
quite a bit later. While the work mentioned above will be used. The
sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| at91_adc_workq_handler
at91_adc_remove |
iio_device_unregister(indio_dev) |
//free indio_dev a bit later |
| iio_push_to_buffers(indio_dev)
| //use indio_dev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in at91_adc_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add overflow check for attribute size
The offset addition could overflow and pass the used size check given an
attribute with very large size (e.g., 0xffffff7f) while parsing MFT
attributes. This could lead to out-of-bound memory R/W if we try to
access the next attribute derived by Add2Ptr(attr, asize)
[ 32.963847] BUG: unable to handle page fault for address: ffff956a83c76067
[ 32.964301] #PF: supervisor read access in kernel mode
[ 32.964526] #PF: error_code(0x0000) - not-present page
[ 32.964893] PGD 4dc01067 P4D 4dc01067 PUD 0
[ 32.965316] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 32.965727] CPU: 0 PID: 243 Comm: mount Not tainted 5.19.0+ #6
[ 32.966050] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 32.966628] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.967239] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.968101] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283
[ 32.968364] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f
[ 32.968651] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8
[ 32.968963] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f
[ 32.969249] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000
[ 32.969870] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170
[ 32.970655] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000
[ 32.971098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 32.971378] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0
[ 32.972098] Call Trace:
[ 32.972842] <TASK>
[ 32.973341] ni_enum_attr_ex+0xda/0xf0
[ 32.974087] ntfs_iget5+0x1db/0xde0
[ 32.974386] ? slab_post_alloc_hook+0x53/0x270
[ 32.974778] ? ntfs_fill_super+0x4c7/0x12a0
[ 32.975115] ntfs_fill_super+0x5d6/0x12a0
[ 32.975336] get_tree_bdev+0x175/0x270
[ 32.975709] ? put_ntfs+0x150/0x150
[ 32.975956] ntfs_fs_get_tree+0x15/0x20
[ 32.976191] vfs_get_tree+0x2a/0xc0
[ 32.976374] ? capable+0x19/0x20
[ 32.976572] path_mount+0x484/0xaa0
[ 32.977025] ? putname+0x57/0x70
[ 32.977380] do_mount+0x80/0xa0
[ 32.977555] __x64_sys_mount+0x8b/0xe0
[ 32.978105] do_syscall_64+0x3b/0x90
[ 32.978830] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 32.979311] RIP: 0033:0x7fdab72e948a
[ 32.980015] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 32.981251] RSP: 002b:00007ffd15b87588 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 32.981832] RAX: ffffffffffffffda RBX: 0000557de0aaf060 RCX: 00007fdab72e948a
[ 32.982234] RDX: 0000557de0aaf260 RSI: 0000557de0aaf2e0 RDI: 0000557de0ab7ce0
[ 32.982714] RBP: 0000000000000000 R08: 0000557de0aaf280 R09: 0000000000000020
[ 32.983046] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000557de0ab7ce0
[ 32.983494] R13: 0000557de0aaf260 R14: 0000000000000000 R15: 00000000ffffffff
[ 32.984094] </TASK>
[ 32.984352] Modules linked in:
[ 32.984753] CR2: ffff956a83c76067
[ 32.985911] ---[ end trace 0000000000000000 ]---
[ 32.986555] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.987217] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.988232] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283
[ 32.988532] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f
[ 32.988916] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8
[ 32.989356] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f
[ 32.989994] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000
[ 32.990415] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170
[ 32.991011] FS:
---truncated--- |
| PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: snic: Fix possible UAF in snic_tgt_create()
Smatch reports a warning as follows:
drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list
If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.
Remove from snic->disc.tgt_list before free(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: Fix potential resource leaks
nfc_get_device() take reference for the device, add missing
nfc_put_device() to release it when not need anymore.
Also fix the style warnning by use error EOPNOTSUPP instead of
ENOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add
dev_kfree_skb() to fix it. Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()
hd44780_probe() allocates a memory chunk for hd with kzalloc() and
makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(),
we should release all relevant memory and resource. But "lcd->drvdata
->hd44780" is not released, which will lead to a memory leak.
We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix
the memory leak bug. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL
event_spec field, indicating support for IIO events. However, event
detection is not supported for all sensors, and if userspace tries to
configure accelerometer wakeup events on a sensor device that does not
support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL
pointer when trying to write to the wakeup register.
Define an additional struct iio_chan_spec array whose members have a NULL
event_spec field, and use this array instead of st_lsm6dsx_acc_channels for
sensors without event detection capability. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
I got the following report while doing fault injection test:
OF: ERROR: memory leak, expected refcount 1 instead of 4,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/tcpc@60/connector
If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to
avoid refcount leak. |
