| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| TSPortal is the WikiTide Foundation’s in-house platform used by the Trust and Safety team to manage reports, investigations, appeals, and transparency work. Prior to version 30, conversion of empty strings to null allows disguising DPA reports as genuine self-deletion reports. This issue has been patched in version 30. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to versions 0.30.3 and 1.13.5, the mergeConfig function in axios crashes with a TypeError when processing configuration objects containing __proto__ as an own property. An attacker can trigger this by providing a malicious configuration object created via JSON.parse(), causing complete denial of service. This vulnerability is fixed in versions 0.30.3 and 1.13.5. |
| Missing validation of type of input in PostgreSQL intarray extension selectivity estimator function allows an object creator to execute arbitrary code as the operating system user running the database. Versions before PostgreSQL 18.2, 17.8, 16.12, 15.16, and 14.21 are affected. |
| Impact:
Fastify applications using schema.body.content for per-content-type body validation can have validation bypassed entirely by prepending a space to the Content-Type header. The body is still parsed correctly but schema validation is skipped.
This is a regression introduced in fastify >= 5.3.2 by the fix for CVE-2025-32442
Patches:
Upgrade to fastify v5.8.5 or later.
Workarounds:
None. Upgrade to the patched version. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.5, 40.8.5, 41.1.0, and 42.0.0-alpha.5, apps that call clipboard.readImage() may be vulnerable to a denial of service. If the system clipboard contains image data that fails to decode, the resulting null bitmap is passed unchecked to image construction, triggering a controlled abort and crashing the process. Apps are only affected if they call clipboard.readImage(). Apps that do not read images from the clipboard are not affected. This issue does not allow memory corruption or code execution. This vulnerability is fixed in 39.8.5, 40.8.5, 41.1.0, and 42.0.0-alpha.5. |
| Improper validation of specified type of input in M365 Copilot allows an unauthorized attacker to disclose information over a network. |
| A flaw was found in Keycloak. Keycloak's Security Assertion Markup Language (SAML) broker endpoint does not properly validate encrypted assertions when the overall SAML response is not signed. An attacker with a valid signed SAML assertion can exploit this by crafting a malicious SAML response. This allows the attacker to inject an encrypted assertion for an arbitrary principal, leading to unauthorized access and potential information disclosure. |
| systemd, a system and service manager, (as PID 1) hits an assert and freezes execution when an unprivileged IPC API call is made with spurious data. On version v249 and older the effect is not an assert, but stack overwriting, with the attacker controlled content. From version v250 and newer this is not possible as the safety check causes an assert instead. This IPC call was added in v239, so versions older than that are not affected. Versions 260-rc1, 259.2, 258.5, and 257.11 contain patches. No known workarounds are available. |
| Dzmitry Lukyanenka, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API param.cgi was vulnerable to a race condition attack allowing for an attacker to block access to the web interface of the Axis device. Other API endpoints or services not making use of param.cgi are not affected.
Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| An improper parsing vulnerability was reported in the FileZ client that could allow a crafted file in the FileZ directory to read arbitrary files on the device due to URL preloading. |
| Nokia Single RAN baseband software versions earlier than 24R1-SR 2.1 MP contain a SOAP message input validation flaw, which in theory could potentially be used for causing resource exhaustion in the Single RAN baseband OAM service.
No practical exploit has been detected for this flaw. However, the issue has been corrected starting from release 24R1-SR 2.1 MP by adding sufficient input validation for received SOAP requests, effectively mitigating the reported issue. |
| Net::CIDR::Set versions 0.10 through 0.13 for Perl does not properly handle leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation.
Net::CIDR::Set used code from Net::CIDR::Lite, which had a similar vulnerability CVE-2021-47154. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| Due to missing input validation, an attacker with high privilege access to ABAP reports could delete the content of arbitrary database tables, if the tables are not protected by an authorization group. This leads to a high impact on integrity and availability of the database. |
| Due to missing input validation, an attacker with high privilege access to ABAP reports could delete the content of arbitrary database tables, if the tables are not protected by an authorization group. This leads to a high impact on integrity and availability of the database but no impact on confidentiality. |
| A vulnerability in the Remote Access SSL VPN service for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to create or delete arbitrary files on the underlying operating system. If critical system files are manipulated, new Remote Access SSL VPN sessions could be denied and existing sessions could be dropped, causing a denial of service (DoS) condition. An exploited device requires a manual reboot to recover.
This vulnerability is due to insufficient input validation when processing HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to create or delete files on the underlying operating system, which could cause the Remote Access SSL VPN service to become unresponsive.
To exploit this vulnerability, the attacker must be authenticated as a VPN user of the affected device. |
| This vulnerability could lead to denial-of-service or service crashes. Exploitation of the moxa_cmd service, because of insufficient input validation, allows attackers to disrupt operations. If exposed to public networks, the vulnerability poses a significant remote threat, potentially allowing attackers to shut down affected systems. |
| Meshtastic-Android is an Android application for the mesh radio software Meshtastic. Prior to version 2.5.21, an attacker is able to send an unencrypted direct message to a victim impersonating any other node of the mesh. This message will be displayed in the same chat that the victim normally communicates with the other node and it will appear as using PKC, while it is not. This means that the victim will be provided with a false sense of security due to the green padlock displayed when using PKC and they'll read the attacker's message as legitimate. Version 2.5.21 contains a patch for the issue. It is suggested to implement a stricter control on whether a message has been received using PKC or using the shared Meshtastic channel key. Moreover, instead of showing no green padlock icon in the chat with no PKC, consider using an explicit indicator like, for example, the yellow half-open padlock displayed when in HAM mode. This remediation, however, applies to the client applications rather than the Meshtastic firmware. |
| An unauthorised attacker within bluetooth range may use an improper validation during the BLE connection request to deadlock the affected devices. |
