| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidraw: fix data race on device refcount
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b02 ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced
When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn
instruction, discard the exception and retry the instruction if the code
stream is changed (e.g. by a different vCPU) between when the CPU
executes the instruction and when KVM decodes the instruction to get the
next RIP.
As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject
INT3/INTO instead of retrying the instruction"), failure to verify that
the correct INTn instruction was decoded can effectively clobber guest
state due to decoding the wrong instruction and thus specifying the
wrong next RIP.
The bug most often manifests as "Oops: int3" panics on static branch
checks in Linux guests. Enabling or disabling a static branch in Linux
uses the kernel's "text poke" code patching mechanism. To modify code
while other CPUs may be executing that code, Linux (temporarily)
replaces the first byte of the original instruction with an int3 (opcode
0xcc), then patches in the new code stream except for the first byte,
and finally replaces the int3 with the first byte of the new code
stream. If a CPU hits the int3, i.e. executes the code while it's being
modified, then the guest kernel must look up the RIP to determine how to
handle the #BP, e.g. by emulating the new instruction. If the RIP is
incorrect, then this lookup fails and the guest kernel panics.
The bug reproduces almost instantly by hacking the guest kernel to
repeatedly check a static branch[1] while running a drgn script[2] on
the host to constantly swap out the memory containing the guest's TSS.
[1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a
[2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: fix xattr related buffer overflow...
Willy Tarreau <w@1wt.eu> forwarded me a message from
Disclosure <disclosure@aisle.com> with the following
warning:
> The helper `xattr_key()` uses the pointer variable in the loop condition
> rather than dereferencing it. As `key` is incremented, it remains non-NULL
> (until it runs into unmapped memory), so the loop does not terminate on
> valid C strings and will walk memory indefinitely, consuming CPU or hanging
> the thread.
I easily reproduced this with setfattr and getfattr, causing a kernel
oops, hung user processes and corrupted orangefs files. Disclosure
sent along a diff (not a patch) with a suggested fix, which I based
this patch on.
After xattr_key started working right, xfstest generic/069 exposed an
xattr related memory leak that lead to OOM. xattr_key returns
a hashed key. When adding xattrs to the orangefs xattr cache, orangefs
used hash_add, a kernel hashing macro. hash_add also hashes the key using
hash_log which resulted in additions to the xattr cache going to the wrong
hash bucket. generic/069 tortures a single file and orangefs does a
getattr for the xattr "security.capability" every time. Orangefs
negative caches on xattrs which includes a kmalloc. Since adds to the
xattr cache were going to the wrong bucket, every getattr for
"security.capability" resulted in another kmalloc, none of which were
ever freed.
I changed the two uses of hash_add to hlist_add_head instead
and the memory leak ceased and generic/069 quit throwing furniture. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname
TCP_Server_Info::hostname may be updated once or many times during
reconnect, so protect its access outside reconnect path as well and
then prevent any potential use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on direct node in truncate_dnode()
syzbot reports below bug:
BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000
CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944
f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154
f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721
f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749
f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799
f2fs_truncate include/linux/fs.h:825 [inline]
f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006
notify_change+0xb2c/0x1180 fs/attr.c:483
do_truncate+0x143/0x200 fs/open.c:66
handle_truncate fs/namei.c:3295 [inline]
do_open fs/namei.c:3640 [inline]
path_openat+0x2083/0x2750 fs/namei.c:3791
do_filp_open+0x1ba/0x410 fs/namei.c:3818
do_sys_openat2+0x16d/0x4c0 fs/open.c:1356
do_sys_open fs/open.c:1372 [inline]
__do_sys_creat fs/open.c:1448 [inline]
__se_sys_creat fs/open.c:1442 [inline]
__x64_sys_creat+0xcd/0x120 fs/open.c:1442
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is, inodeA references inodeB via inodeB's ino, once inodeA
is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's
node page, it traverse mapping data from node->i.i_addr[0] to
node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access.
This patch fixes to add sanity check on dnode page in truncate_dnode(),
so that, it can help to avoid triggering such issue, and once it encounters
such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE
error into superblock, later fsck can detect such issue and try repairing.
Also, it removes f2fs_truncate_data_blocks() for cleanup due to the
function has only one caller, and uses f2fs_truncate_data_blocks_range()
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempool: fix poisoning order>0 pages with HIGHMEM
The kernel test has reported:
BUG: unable to handle page fault for address: fffba000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 03171067 *pte = 00000000
Oops: Oops: 0002 [#1]
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca
Tainted: [T]=RANDSTRUCT
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17)
Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56
EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b
ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287
CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690
Call Trace:
poison_element (mm/mempool.c:83 mm/mempool.c:102)
mempool_init_node (mm/mempool.c:142 mm/mempool.c:226)
mempool_init_noprof (mm/mempool.c:250 (discriminator 1))
? mempool_alloc_pages (mm/mempool.c:640)
bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8))
? mempool_alloc_pages (mm/mempool.c:640)
do_one_initcall (init/main.c:1283)
Christoph found out this is due to the poisoning code not dealing
properly with CONFIG_HIGHMEM because only the first page is mapped but
then the whole potentially high-order page is accessed.
We could give up on HIGHMEM here, but it's straightforward to fix this
with a loop that's mapping, poisoning or checking and unmapping
individual pages. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Don't leak a resource on eviction error
On eviction errors other than -EMULTIHOP we were leaking a resource.
Fix.
v2:
- Avoid yet another goto (Andi Shyti) |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix a memory corruption in extended buffer descriptor mode
For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.
Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:
[ 16.992082] ------------[ cut here ]------------
[ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[ 17.018977] Modules linked in: xxxxx
[ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[ 17.045345] Hardware name: xxxxx
[ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 17.054322] pc : check_unmap+0x6a0/0x900
[ 17.058243] lr : check_unmap+0x6a0/0x900
[ 17.062163] sp : ffffffc010003c40
[ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[ 17.097343] x17: 0000000000000000 x16: 0000000000000000
[ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[ 17.107959] x13: 0720072007200720 x12: 0720072007200720
[ 17.113261] x11: 0720072007200720 x10: 0720072007200720
[ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[ 17.145082] Call trace:
[ 17.147524] check_unmap+0x6a0/0x900
[ 17.151091] debug_dma_unmap_page+0x88/0x90
[ 17.155266] gem_rx+0x114/0x2f0
[ 17.158396] macb_poll+0x58/0x100
[ 17.161705] net_rx_action+0x118/0x400
[ 17.165445] __do_softirq+0x138/0x36c
[ 17.169100] irq_exit+0x98/0xc0
[ 17.172234] __handle_domain_irq+0x64/0xc0
[ 17.176320] gic_handle_irq+0x5c/0xc0
[ 17.179974] el1_irq+0xb8/0x140
[ 17.183109] xiic_process+0x5c/0xe30
[ 17.186677] irq_thread_fn+0x28/0x90
[ 17.190244] irq_thread+0x208/0x2a0
[ 17.193724] kthread+0x130/0x140
[ 17.196945] ret_from_fork+0x10/0x20
[ 17.200510] ---[ end trace 7240980785f81d6f ]---
[ 237.021490] ------------[ cut here ]------------
[ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[ 237.041802] Modules linked in: xxxxx
[ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28
[ 237.068941] Hardware name: xxxxx
[ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 237.077900] pc : add_dma_entry+0x214/0x240
[ 237.081986] lr : add_dma_entry+0x214/0x240
[ 237.086072] sp : ffffffc010003c30
[ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[ 237.099987] x25: 0000000000000002 x24: 0000000000000000
[ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[ 237.115897] x19: 00000000ffffffef x18: 0000000000000010
[ 237.121201] x17: 0000000000000000 x16: 0000000000000000
[ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[ 237.131807] x13: 0720072007200720 x12: 0720072007200720
[ 237.137111] x11: 0720072007200720 x10: 0720072007200720
[ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[ 237.15302
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: usb: siano: Fix use after free bugs caused by do_submit_urb
There are UAF bugs caused by do_submit_urb(). One of the KASan reports
is shown below:
[ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890
[ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49
[ 36.408316]
[ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8
[ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.416157] Workqueue: 0x0 (events)
[ 36.417654] Call Trace:
[ 36.418546] <TASK>
[ 36.419320] dump_stack_lvl+0x96/0xd0
[ 36.420522] print_address_description+0x75/0x350
[ 36.421992] print_report+0x11b/0x250
[ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0
[ 36.424806] ? __virt_addr_valid+0xcf/0x170
[ 36.426069] ? worker_thread+0x4a2/0x890
[ 36.427355] kasan_report+0x131/0x160
[ 36.428556] ? worker_thread+0x4a2/0x890
[ 36.430053] worker_thread+0x4a2/0x890
[ 36.431297] ? worker_clr_flags+0x90/0x90
[ 36.432479] kthread+0x166/0x190
[ 36.433493] ? kthread_blkcg+0x50/0x50
[ 36.434669] ret_from_fork+0x22/0x30
[ 36.435923] </TASK>
[ 36.436684]
[ 36.437215] Allocated by task 24:
[ 36.438289] kasan_set_track+0x50/0x80
[ 36.439436] __kasan_kmalloc+0x89/0xa0
[ 36.440566] smsusb_probe+0x374/0xc90
[ 36.441920] usb_probe_interface+0x2d1/0x4c0
[ 36.443253] really_probe+0x1d5/0x580
[ 36.444539] __driver_probe_device+0xe3/0x130
[ 36.446085] driver_probe_device+0x49/0x220
[ 36.447423] __device_attach_driver+0x19e/0x1b0
[ 36.448931] bus_for_each_drv+0xcb/0x110
[ 36.450217] __device_attach+0x132/0x1f0
[ 36.451470] bus_probe_device+0x59/0xf0
[ 36.452563] device_add+0x4ec/0x7b0
[ 36.453830] usb_set_configuration+0xc63/0xe10
[ 36.455230] usb_generic_driver_probe+0x3b/0x80
[ 36.456166] printk: console [ttyGS0] disabled
[ 36.456569] usb_probe_device+0x90/0x110
[ 36.459523] really_probe+0x1d5/0x580
[ 36.461027] __driver_probe_device+0xe3/0x130
[ 36.462465] driver_probe_device+0x49/0x220
[ 36.463847] __device_attach_driver+0x19e/0x1b0
[ 36.465229] bus_for_each_drv+0xcb/0x110
[ 36.466466] __device_attach+0x132/0x1f0
[ 36.467799] bus_probe_device+0x59/0xf0
[ 36.469010] device_add+0x4ec/0x7b0
[ 36.470125] usb_new_device+0x863/0xa00
[ 36.471374] hub_event+0x18c7/0x2220
[ 36.472746] process_one_work+0x34c/0x5b0
[ 36.474041] worker_thread+0x4b7/0x890
[ 36.475216] kthread+0x166/0x190
[ 36.476267] ret_from_fork+0x22/0x30
[ 36.477447]
[ 36.478160] Freed by task 24:
[ 36.479239] kasan_set_track+0x50/0x80
[ 36.480512] kasan_save_free_info+0x2b/0x40
[ 36.481808] ____kasan_slab_free+0x122/0x1a0
[ 36.483173] __kmem_cache_free+0xc4/0x200
[ 36.484563] smsusb_term_device+0xcd/0xf0
[ 36.485896] smsusb_probe+0xc85/0xc90
[ 36.486976] usb_probe_interface+0x2d1/0x4c0
[ 36.488303] really_probe+0x1d5/0x580
[ 36.489498] __driver_probe_device+0xe3/0x130
[ 36.491140] driver_probe_device+0x49/0x220
[ 36.492475] __device_attach_driver+0x19e/0x1b0
[ 36.493988] bus_for_each_drv+0xcb/0x110
[ 36.495171] __device_attach+0x132/0x1f0
[ 36.496617] bus_probe_device+0x59/0xf0
[ 36.497875] device_add+0x4ec/0x7b0
[ 36.498972] usb_set_configuration+0xc63/0xe10
[ 36.500264] usb_generic_driver_probe+0x3b/0x80
[ 36.501740] usb_probe_device+0x90/0x110
[ 36.503084] really_probe+0x1d5/0x580
[ 36.504241] __driver_probe_device+0xe3/0x130
[ 36.505548] driver_probe_device+0x49/0x220
[ 36.506766] __device_attach_driver+0x19e/0x1b0
[ 36.508368] bus_for_each_drv+0xcb/0x110
[ 36.509646] __device_attach+0x132/0x1f0
[ 36.510911] bus_probe_device+0x59/0xf0
[ 36.512103] device_add+0x4ec/0x7b0
[ 36.513215] usb_new_device+0x863/0xa00
[ 36.514736] hub_event+0x18c7/0x2220
[ 36.516130] process_one_work+
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
blk-iocost sometimes causes the following crash:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
...
RIP: 0010:_raw_spin_lock+0x17/0x30
Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 <f0> 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00
RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001
RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0
RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003
R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000
R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600
FS: 00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0
Call Trace:
<TASK>
ioc_weight_write+0x13d/0x410
cgroup_file_write+0x7a/0x130
kernfs_fop_write_iter+0xf5/0x170
vfs_write+0x298/0x370
ksys_write+0x5f/0xb0
__x64_sys_write+0x1b/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This happens because iocg->ioc is NULL. The field is initialized by
ioc_pd_init() and never cleared. The NULL deref is caused by
blkcg_activate_policy() installing blkg_policy_data before initializing it.
blkcg_activate_policy() was doing the following:
1. Allocate pd's for all existing blkg's and install them in blkg->pd[].
2. Initialize all pd's.
3. Online all pd's.
blkcg_activate_policy() only grabs the queue_lock and may release and
re-acquire the lock as allocation may need to sleep. ioc_weight_write()
grabs blkcg->lock and iterates all its blkg's. The two can race and if
ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a
pd which is not initialized yet, leading to crash.
The crash can be reproduced with the following script:
#!/bin/bash
echo +io > /sys/fs/cgroup/cgroup.subtree_control
systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct
echo 100 > /sys/fs/cgroup/system.slice/io.weight
bash -c "echo '8:0 enable=1' > /sys/fs/cgroup/io.cost.qos" &
sleep .2
echo 100 > /sys/fs/cgroup/system.slice/io.weight
with the following patch applied:
> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index fc49be622e05..38d671d5e10c 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol)
> pd->online = false;
> }
>
> + if (system_state == SYSTEM_RUNNING) {
> + spin_unlock_irq(&q->queue_lock);
> + ssleep(1);
> + spin_lock_irq(&q->queue_lock);
> + }
> +
> /* all allocated, init in the same order */
> if (pol->pd_init_fn)
> list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)
I don't see a reason why all pd's should be allocated, initialized and
onlined together. The only ordering requirement is that parent blkgs to be
initialized and onlined before children, which is guaranteed from the
walking order. Let's fix the bug by allocating, initializing and onlining pd
for each blkg and holding blkcg->lock over initialization and onlining. This
ensures that an installed blkg is always fully initialized and onlined
removing the the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace
A received TKIP key may be up to 32 bytes because it may contain
MIC rx/tx keys too. These are not used by iwl and copying these
over overflows the iwl_keyinfo.key field.
Add a check to not copy more data to iwl_keyinfo.key then will fit.
This fixes backtraces like this one:
memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16)
WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017
RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Call Trace:
<TASK>
iwl_set_dynamic_key+0x1f0/0x220 [iwldvm]
iwlagn_mac_set_key+0x1e4/0x280 [iwldvm]
drv_set_key+0xa4/0x1b0 [mac80211]
ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211]
ieee80211_key_replace+0x22d/0x8e0 [mac80211]
<snip> |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix NULL pointer dereference
vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.
This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.
[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074] <TASK>
[ 4761.096180] ? __die+0x1f/0x70
[ 4761.099238] ? page_fault_oops+0x171/0x4f0
[ 4761.103340] ? exc_page_fault+0x7b/0x180
[ 4761.107265] ? asm_exc_page_fault+0x22/0x30
[ 4761.111460] ? memcpy_orig+0xc5/0x130
[ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580] virtio_dev_remove+0x3a/0x90
[ 4761.140509] device_release_driver_internal+0x19b/0x200
[ 4761.145742] bus_remove_device+0xc2/0x130
[ 4761.149755] device_del+0x158/0x3e0
[ 4761.153245] ? kernfs_find_ns+0x35/0xc0
[ 4761.157086] device_unregister+0x13/0x60
[ 4761.161010] unregister_virtio_device+0x11/0x20
[ 4761.165543] device_release_driver_internal+0x19b/0x200
[ 4761.170770] bus_remove_device+0xc2/0x130
[ 4761.174782] device_del+0x158/0x3e0
[ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336] device_unregister+0x13/0x60
[ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: refuse to create ea block when umounted
The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/bpf: Fix buffer overflow in tcp_basertt
Using sizeof(nv) or strlen(nv)+1 is correct. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: flush inode if atomic file is aborted
Let's flush the inode being aborted atomic operation to avoid stale dirty
inode during eviction in this call stack:
f2fs_mark_inode_dirty_sync+0x22/0x40 [f2fs]
f2fs_abort_atomic_write+0xc4/0xf0 [f2fs]
f2fs_evict_inode+0x3f/0x690 [f2fs]
? sugov_start+0x140/0x140
evict+0xc3/0x1c0
evict_inodes+0x17b/0x210
generic_shutdown_super+0x32/0x120
kill_block_super+0x21/0x50
deactivate_locked_super+0x31/0x90
cleanup_mnt+0x100/0x160
task_work_run+0x59/0x90
do_exit+0x33b/0xa50
do_group_exit+0x2d/0x80
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This triggers f2fs_bug_on() in f2fs_evict_inode:
f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE));
This fixes the syzbot report:
loop0: detected capacity change from 0 to 131072
F2FS-fs (loop0): invalid crc value
F2FS-fs (loop0): Found nat_bits in checkpoint
F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:869!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 5014 Comm: syz-executor220 Not tainted 6.4.0-syzkaller-11479-g6cd06ab12d1a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
RIP: 0010:f2fs_evict_inode+0x172d/0x1e00 fs/f2fs/inode.c:869
Code: ff df 48 c1 ea 03 80 3c 02 00 0f 85 6a 06 00 00 8b 75 40 ba 01 00 00 00 4c 89 e7 e8 6d ce 06 00 e9 aa fc ff ff e8 63 22 e2 fd <0f> 0b e8 5c 22 e2 fd 48 c7 c0 a8 3a 18 8d 48 ba 00 00 00 00 00 fc
RSP: 0018:ffffc90003a6fa00 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff8880273b8000 RSI: ffffffff83a2bd0d RDI: 0000000000000007
RBP: ffff888077db91b0 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888029a3c000
R13: ffff888077db9660 R14: ffff888029a3c0b8 R15: ffff888077db9c50
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1909bb9000 CR3: 00000000276a9000 CR4: 0000000000350ef0
Call Trace:
<TASK>
evict+0x2ed/0x6b0 fs/inode.c:665
dispose_list+0x117/0x1e0 fs/inode.c:698
evict_inodes+0x345/0x440 fs/inode.c:748
generic_shutdown_super+0xaf/0x480 fs/super.c:478
kill_block_super+0x64/0xb0 fs/super.c:1417
kill_f2fs_super+0x2af/0x3c0 fs/f2fs/super.c:4704
deactivate_locked_super+0x98/0x160 fs/super.c:330
deactivate_super+0xb1/0xd0 fs/super.c:361
cleanup_mnt+0x2ae/0x3d0 fs/namespace.c:1254
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xa9a/0x29a0 kernel/exit.c:874
do_group_exit+0xd4/0x2a0 kernel/exit.c:1024
__do_sys_exit_group kernel/exit.c:1035 [inline]
__se_sys_exit_group kernel/exit.c:1033 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1033
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f309be71a09
Code: Unable to access opcode bytes at 0x7f309be719df.
RSP: 002b:00007fff171df518 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f309bef7330 RCX: 00007f309be71a09
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001
RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 00007f309bef1e40
R10: 0000000000010600 R11: 0000000000000246 R12: 00007f309bef7330
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:f2fs_evict_inode+0x172d/0x1e00 fs/f2fs/inode.c:869
Code: ff df 48 c1 ea 03 80 3c 02 00 0f 85 6a 06 00 00 8b 75 40 ba 01 00 00 00 4c 89 e7 e8 6d ce 06 00 e9 aa fc ff ff e8 63 22 e2 fd <0f> 0b e8 5c 22 e2 fd 48 c7 c0 a8 3a 18 8d 48 ba 00 00 00 00 00 fc
RSP: 0018:ffffc90003a6fa00 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: read sk->sk_family once in sk_mc_loop()
syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()
We have many more similar issues to fix.
WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695 |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl()
If the copy of the description string from userspace fails, then the page
for the instance descriptor doesn't get freed before returning -EFAULT,
which leads to a memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Sign-extend struct ops return values properly
The ns_bpf_qdisc selftest triggers a kernel panic:
Oops[#1]:
CPU 0 Unable to handle kernel paging request at virtual address 0000000000741d58, era == 90000000851b5ac0, ra == 90000000851b5aa4
CPU: 0 UID: 0 PID: 449 Comm: test_progs Tainted: G OE 6.16.0+ #3 PREEMPT(full)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
pc 90000000851b5ac0 ra 90000000851b5aa4 tp 90000001076b8000 sp 90000001076bb600
a0 0000000000741ce8 a1 0000000000000001 a2 90000001076bb5c0 a3 0000000000000008
a4 90000001004c4620 a5 9000000100741ce8 a6 0000000000000000 a7 0100000000000000
t0 0000000000000010 t1 0000000000000000 t2 9000000104d24d30 t3 0000000000000001
t4 4f2317da8a7e08c4 t5 fffffefffc002f00 t6 90000001004c4620 t7 ffffffffc61c5b3d
t8 0000000000000000 u0 0000000000000001 s9 0000000000000050 s0 90000001075bc800
s1 0000000000000040 s2 900000010597c400 s3 0000000000000008 s4 90000001075bc880
s5 90000001075bc8f0 s6 0000000000000000 s7 0000000000741ce8 s8 0000000000000000
ra: 90000000851b5aa4 __qdisc_run+0xac/0x8d8
ERA: 90000000851b5ac0 __qdisc_run+0xc8/0x8d8
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000741d58
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE)]
Process test_progs (pid: 449, threadinfo=000000009af02b3a, task=00000000e9ba4956)
Stack : 0000000000000000 90000001075bc8ac 90000000869524a8 9000000100741ce8
90000001075bc800 9000000100415300 90000001075bc8ac 0000000000000000
900000010597c400 900000008694a000 0000000000000000 9000000105b59000
90000001075bc800 9000000100741ce8 0000000000000050 900000008513000c
9000000086936000 0000000100094d4c fffffff400676208 0000000000000000
9000000105b59000 900000008694a000 9000000086bf0dc0 9000000105b59000
9000000086bf0d68 9000000085147010 90000001075be788 0000000000000000
9000000086bf0f98 0000000000000001 0000000000000010 9000000006015840
0000000000000000 9000000086be6c40 0000000000000000 0000000000000000
0000000000000000 4f2317da8a7e08c4 0000000000000101 4f2317da8a7e08c4
...
Call Trace:
[<90000000851b5ac0>] __qdisc_run+0xc8/0x8d8
[<9000000085130008>] __dev_queue_xmit+0x578/0x10f0
[<90000000853701c0>] ip6_finish_output2+0x2f0/0x950
[<9000000085374bc8>] ip6_finish_output+0x2b8/0x448
[<9000000085370b24>] ip6_xmit+0x304/0x858
[<90000000853c4438>] inet6_csk_xmit+0x100/0x170
[<90000000852b32f0>] __tcp_transmit_skb+0x490/0xdd0
[<90000000852b47fc>] tcp_connect+0xbcc/0x1168
[<90000000853b9088>] tcp_v6_connect+0x580/0x8a0
[<90000000852e7738>] __inet_stream_connect+0x170/0x480
[<90000000852e7a98>] inet_stream_connect+0x50/0x88
[<90000000850f2814>] __sys_connect+0xe4/0x110
[<90000000850f2858>] sys_connect+0x18/0x28
[<9000000085520c94>] do_syscall+0x94/0x1a0
[<9000000083df1fb8>] handle_syscall+0xb8/0x158
Code: 4001ad80 2400873f 2400832d <240073cc> 001137ff 001133ff 6407b41f 001503cc 0280041d
---[ end trace 0000000000000000 ]---
The bpf_fifo_dequeue prog returns a skb which is a pointer. The pointer
is treated as a 32bit value and sign extend to 64bit in epilogue. This
behavior is right for most bpf prog types but wrong for struct ops which
requires LoongArch ABI.
So let's sign extend struct ops return values according to the LoongArch
ABI ([1]) and return value spec in function model.
[1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html |
