| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: transport_ipc: validate payload size before reading handle
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work
The origin code calls cancel_delayed_work() in ocelot_stats_deinit()
to cancel the cyclic delayed work item ocelot->stats_work. However,
cancel_delayed_work() may fail to cancel the work item if it is already
executing. While destroy_workqueue() does wait for all pending work items
in the work queue to complete before destroying the work queue, it cannot
prevent the delayed work item from being rescheduled within the
ocelot_check_stats_work() function. This limitation exists because the
delayed work item is only enqueued into the work queue after its timer
expires. Before the timer expiration, destroy_workqueue() has no visibility
of this pending work item. Once the work queue appears empty,
destroy_workqueue() proceeds with destruction. When the timer eventually
expires, the delayed work item gets queued again, leading to the following
warning:
workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats
WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0
...
RIP: 0010:__queue_work+0x875/0xaf0
...
RSP: 0018:ffff88806d108b10 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88
RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2
R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000
R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0
FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0
Call Trace:
<IRQ>
? kasan_report+0xc6/0xf0
? __pfx_delayed_work_timer_fn+0x10/0x10
? __pfx_delayed_work_timer_fn+0x10/0x10
call_timer_fn+0x25/0x1c0
__run_timer_base.part.0+0x3be/0x8c0
? __pfx_delayed_work_timer_fn+0x10/0x10
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x1c0/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
The following diagram reveals the cause of the above warning:
CPU 0 (remove) | CPU 1 (delayed work callback)
mscc_ocelot_remove() |
ocelot_deinit() | ocelot_check_stats_work()
ocelot_stats_deinit() |
cancel_delayed_work()| ...
| queue_delayed_work()
destroy_workqueue() | (wait a time)
| __queue_work() //UAF
The above scenario actually constitutes a UAF vulnerability.
The ocelot_stats_deinit() is only invoked when initialization
failure or resource destruction, so we must ensure that any
delayed work items cannot be rescheduled.
Replace cancel_delayed_work() with disable_delayed_work_sync()
to guarantee proper cancellation of the delayed work item and
ensure completion of any currently executing work before the
workqueue is deallocated.
A deadlock concern was considered: ocelot_stats_deinit() is called
in a process context and is not holding any locks that the delayed
work item might also need. Therefore, the use of the _sync() variant
is safe here.
This bug was identified through static analysis. To reproduce the
issue and validate the fix, I simulated ocelot-swit
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link()
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.
Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.
Also handle fwnode_graph_get_port_parent() failures.
In order to fix these issues, add an error handling path to the function
and the needed gotos. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix locking for runpm vs reclaim
For cases where icc_bw_set() can be called in callbaths that could
deadlock against shrinker/reclaim, such as runpm resume, we need to
decouple the icc locking. Introduce a new icc_bw_lock for cases where
we need to serialize bw aggregation and update to decouple that from
paths that require memory allocation such as node/link creation/
destruction.
Fixes this lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc8-debug+ #554 Not tainted
------------------------------------------------------
ring0/132 is trying to acquire lock:
ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234
but task is already holding lock:
ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x74/0xc0
dma_resv_lockdep+0x1f4/0x2f4
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x80/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
topology_parse_cpu_capacity+0x8c/0x178
get_cpu_for_node+0x88/0xc4
parse_cluster+0x1b0/0x28c
parse_cluster+0x8c/0x28c
init_cpu_topology+0x168/0x188
smp_prepare_cpus+0x24/0xf8
kernel_init_freeable+0x18c/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #2 (fs_reclaim){+.+.}-{0:0}:
__fs_reclaim_acquire+0x3c/0x48
fs_reclaim_acquire+0x54/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
kzalloc.constprop.0+0x14/0x20
icc_node_create_nolock+0x4c/0xc4
icc_node_create+0x38/0x58
qcom_icc_rpmh_probe+0x1b8/0x248
platform_probe+0x70/0xc4
really_probe+0x158/0x290
__driver_probe_device+0xc8/0xe0
driver_probe_device+0x44/0x100
__driver_attach+0xf8/0x108
bus_for_each_dev+0x78/0xc4
driver_attach+0x2c/0x38
bus_add_driver+0xd0/0x1d8
driver_register+0xbc/0xf8
__platform_driver_register+0x30/0x3c
qnoc_driver_init+0x24/0x30
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #1 (icc_lock){+.+.}-{3:3}:
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
icc_set_bw+0x88/0x2b4
_set_opp_bw+0x8c/0xd8
_set_opp+0x19c/0x300
dev_pm_opp_set_opp+0x84/0x94
a6xx_gmu_resume+0x18c/0x804
a6xx_pm_resume+0xf8/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
adreno_load_gpu+0xc4/0x17c
msm_open+0x50/0x120
drm_file_alloc+0x17c/0x228
drm_open_helper+0x74/0x118
drm_open+0xa0/0x144
drm_stub_open+0xd4/0xe4
chrdev_open+0x1b8/0x1e4
do_dentry_open+0x2f8/0x38c
vfs_open+0x34/0x40
path_openat+0x64c/0x7b4
do_filp_open+0x54/0xc4
do_sys_openat2+0x9c/0x100
do_sys_open+0x50/0x7c
__arm64_sys_openat+0x28/0x34
invoke_syscall+0x8c/0x128
el0_svc_common.constprop.0+0xa0/0x11c
do_el0_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer
In check_alu_op(), the verifier currently calls check_reg_arg() and
adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations.
However, if the destination register holds a pointer, these scalar
adjustments are unnecessary and potentially incorrect.
This patch adds a check to skip the adjustment logic when the destination
register contains a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: zero unused hash fields
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: potential integer overflow in usbg_make_tpg()
The variable tpgt in usbg_make_tpg() is defined as unsigned long and is
assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an
integer overflow when tpgt is greater than USHRT_MAX (65535). I
haven't tried to trigger it myself, but it is possible to trigger it
by calling usbg_make_tpg() with a large value for tpgt.
I modified the type of tpgt to match tpgt->tport_tpgt and adjusted the
relevant code accordingly.
This patch is similar to commit 59c816c1f24d ("vhost/scsi: potential
memory corruption"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit
Always purge mcu skb queues in mt7996_mcu_exit routine even if
mt7996_firmware_state fails. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: led-core: Fix refcount leak in of_led_get()
class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_vdpa: build affinity masks conditionally
We try to build affinity mask via create_affinity_masks()
unconditionally which may lead several issues:
- the affinity mask is not used for parent without affinity support
(only VDUSE support the affinity now)
- the logic of create_affinity_masks() might not work for devices
other than block. For example it's not rare in the networking device
where the number of queues could exceed the number of CPUs. Such
case breaks the current affinity logic which is based on
group_cpus_evenly() who assumes the number of CPUs are not less than
the number of groups. This can trigger a warning[1]:
if (ret >= 0)
WARN_ON(nr_present + nr_others < numgrps);
Fixing this by only build the affinity masks only when
- Driver passes affinity descriptor, driver like virtio-blk can make
sure to limit the number of queues when it exceeds the number of CPUs
- Parent support affinity setting config ops
This help to avoid the warning. More optimizations could be done on
top.
[1]
[ 682.146655] WARNING: CPU: 6 PID: 1550 at lib/group_cpus.c:400 group_cpus_evenly+0x1aa/0x1c0
[ 682.146668] CPU: 6 PID: 1550 Comm: vdpa Not tainted 6.5.0-rc5jason+ #79
[ 682.146671] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[ 682.146673] RIP: 0010:group_cpus_evenly+0x1aa/0x1c0
[ 682.146676] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc e8 1b c4 74 ff 48 89 ef e8 13 ac 98 ff 4c 89 e7 45 31 e4 e8 08 ac 98 ff eb c2 <0f> 0b eb b6 e8 fd 05 c3 00 45 31 e4 eb e5 cc cc cc cc cc cc cc cc
[ 682.146679] RSP: 0018:ffffc9000215f498 EFLAGS: 00010293
[ 682.146682] RAX: 000000000001f1e0 RBX: 0000000000000041 RCX: 0000000000000000
[ 682.146684] RDX: ffff888109922058 RSI: 0000000000000041 RDI: 0000000000000030
[ 682.146686] RBP: ffff888109922058 R08: ffffc9000215f498 R09: ffffc9000215f4a0
[ 682.146687] R10: 00000000000198d0 R11: 0000000000000030 R12: ffff888107e02800
[ 682.146689] R13: 0000000000000030 R14: 0000000000000030 R15: 0000000000000041
[ 682.146692] FS: 00007fef52315740(0000) GS:ffff888237380000(0000) knlGS:0000000000000000
[ 682.146695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 682.146696] CR2: 00007fef52509000 CR3: 0000000110dbc004 CR4: 0000000000370ee0
[ 682.146698] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 682.146700] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 682.146701] Call Trace:
[ 682.146703] <TASK>
[ 682.146705] ? __warn+0x7b/0x130
[ 682.146709] ? group_cpus_evenly+0x1aa/0x1c0
[ 682.146712] ? report_bug+0x1c8/0x1e0
[ 682.146717] ? handle_bug+0x3c/0x70
[ 682.146721] ? exc_invalid_op+0x14/0x70
[ 682.146723] ? asm_exc_invalid_op+0x16/0x20
[ 682.146727] ? group_cpus_evenly+0x1aa/0x1c0
[ 682.146729] ? group_cpus_evenly+0x15c/0x1c0
[ 682.146731] create_affinity_masks+0xaf/0x1a0
[ 682.146735] virtio_vdpa_find_vqs+0x83/0x1d0
[ 682.146738] ? __pfx_default_calc_sets+0x10/0x10
[ 682.146742] virtnet_find_vqs+0x1f0/0x370
[ 682.146747] virtnet_probe+0x501/0xcd0
[ 682.146749] ? vp_modern_get_status+0x12/0x20
[ 682.146751] ? get_cap_addr.isra.0+0x10/0xc0
[ 682.146754] virtio_dev_probe+0x1af/0x260
[ 682.146759] really_probe+0x1a5/0x410 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix crash in nfsd4_read_release()
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: fix warning in dqgrab()
There's issue as follows when do fault injection:
WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0
Modules linked in:
CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541
RIP: 0010:dquot_disable+0x13b7/0x18c0
RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980
RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002
RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000
R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130
R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118
FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dquot_load_quota_sb+0xd53/0x1060
dquot_resume+0x172/0x230
ext4_reconfigure+0x1dc6/0x27b0
reconfigure_super+0x515/0xa90
__x64_sys_fsconfig+0xb19/0xd20
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Above issue may happens as follows:
ProcessA ProcessB ProcessC
sys_fsconfig
vfs_fsconfig_locked
reconfigure_super
ext4_remount
dquot_suspend -> suspend all type quota
sys_fsconfig
vfs_fsconfig_locked
reconfigure_super
ext4_remount
dquot_resume
ret = dquot_load_quota_sb
add_dquot_ref
do_open -> open file O_RDWR
vfs_open
do_dentry_open
get_write_access
atomic_inc_unless_negative(&inode->i_writecount)
ext4_file_open
dquot_file_open
dquot_initialize
__dquot_initialize
dqget
atomic_inc(&dquot->dq_count);
__dquot_initialize
__dquot_initialize
dqget
if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
ext4_acquire_dquot
-> Return error DQ_ACTIVE_B flag isn't set
dquot_disable
invalidate_dquots
if (atomic_read(&dquot->dq_count))
dqgrab
WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
-> Trigger warning
In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when
dqgrab().
To solve above issue just replace the dqgrab() use in invalidate_dquots() with
atomic_inc(&dquot->dq_count). |
| In the Linux kernel, the following vulnerability has been resolved:
rv: Fully convert enabled_monitors to use list_head as iterator
The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the
iterator as struct rv_monitor *, while others treat the iterator as struct
list_head *.
This causes a wrong type cast and crashes the system as reported by Nathan.
Convert everything to use struct list_head * as iterator. This also makes
enabled_monitors consistent with available_monitors. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: call __btrfs_remove_free_space_cache_locked on cache load failure
Now that lockdep is staying enabled through our entire CI runs I started
seeing the following stack in generic/475
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2171864 at fs/btrfs/discard.c:604 btrfs_discard_update_discardable+0x98/0xb0
CPU: 1 PID: 2171864 Comm: kworker/u4:0 Not tainted 5.19.0-rc8+ #789
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:btrfs_discard_update_discardable+0x98/0xb0
RSP: 0018:ffffb857c2f7bad0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8c85c605c200 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff86807c5b RDI: ffffffff868a831e
RBP: ffff8c85c4c54000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8c85c66932f0 R11: 0000000000000001 R12: ffff8c85c3899010
R13: ffff8c85d5be4f40 R14: ffff8c85c4c54000 R15: ffff8c86114bfa80
FS: 0000000000000000(0000) GS:ffff8c863bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2e7f168160 CR3: 000000010289a004 CR4: 0000000000370ee0
Call Trace:
__btrfs_remove_free_space_cache+0x27/0x30
load_free_space_cache+0xad2/0xaf0
caching_thread+0x40b/0x650
? lock_release+0x137/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_is_held_type+0xe2/0x140
process_one_work+0x271/0x590
? process_one_work+0x590/0x590
worker_thread+0x52/0x3b0
? process_one_work+0x590/0x590
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
This is the code
ctl = block_group->free_space_ctl;
discard_ctl = &block_group->fs_info->discard_ctl;
lockdep_assert_held(&ctl->tree_lock);
We have a temporary free space ctl for loading the free space cache in
order to avoid having allocations happening while we're loading the
cache. When we hit an error we free it all up, however this also calls
btrfs_discard_update_discardable, which requires
block_group->free_space_ctl->tree_lock to be held. However this is our
temporary ctl so this lock isn't held. Fix this by calling
__btrfs_remove_free_space_cache_locked instead so that we only clean up
the entries and do not mess with the discardable stats. |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. A vulnerability within the Datadog Linux Host Agent versions 7.65.0 through 7.70.2 exists due to insufficient permissions being set on the `opt/datadog-agent/python-scripts/__pycache__` directory during installation. Code in this directory is only run by the Agent during Agent install/upgrades. This could allow an attacker with local access to modify files in this directory, which would then subsequently be run when the Agent is upgraded, resulting in local privilege escalation. This issue requires local access to the host and a valid low privilege account to be vulnerable. Note that this vulnerability only impacts the Linux Host Agent. Other variations of the Agent including the container, kubernetes, windows host and other agents are not impacted. Version 7.71.0 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: prevent poison consumption when splitting THP
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
First Machine Check occurs // [1]
memory_failure() // [2]
try_to_split_thp_page()
split_huge_page()
split_huge_page_to_list_to_order()
__folio_split() // [3]
remap_page()
remove_migration_ptes()
remove_migration_pte()
try_to_map_unused_to_zeropage() // [4]
memchr_inv() // [5]
Second Machine Check occurs // [6]
Kernel panic
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ns: initialize ns_list_node for initial namespaces
Make sure that the list is always initialized for initial namespaces. |
