| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in the Keycloak Server. The Keycloak Server is vulnerable to a denial of service (DoS) attack due to improper handling of proxy headers. When Keycloak is configured to accept incoming proxy headers, it may accept non-IP values, such as obfuscated identifiers, without proper validation. This issue can lead to costly DNS resolution operations, which an attacker could exploit to tie up IO threads and potentially cause a denial of service.
The attacker must have access to send requests to a Keycloak instance that is configured to accept proxy headers, specifically when reverse proxies do not overwrite incoming headers, and Keycloak is configured to trust these headers. |
| A vulnerability was found in Undertow, where URL-encoded request paths can be mishandled during concurrent requests on the AJP listener. This issue arises because the same buffer is used to decode the paths for multiple requests simultaneously, leading to incorrect path information being processed. As a result, the server may attempt to access the wrong path, causing errors such as "404 Not Found" or other application failures. This flaw can potentially lead to a denial of service, as legitimate resources become inaccessible due to the path mix-up. |
| A vulnerability was found in Undertow, where the chunked response hangs after the body was flushed. The response headers and body were sent but the client would continue waiting as Undertow does not send the expected 0\r\n termination of the chunked response. This results in uncontrolled resource consumption, leaving the server side to a denial of service attack. This happens only with Java 17 TLSv1.3 scenarios. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| Backstage is an open framework for building developer portals. Configuration supplied through APP_CONFIG_* environment variables, for example APP_CONFIG_backend_listen_port=7007, where unexpectedly ignoring the visibility defined in configuration schema. This occurred even if the configuration schema specified that they should have backend or secret visibility. This was an intended feature of the APP_CONFIG_* way of supplying configuration, but now clearly goes against the expected behavior of the configuration system. This behavior leads to a risk of potentially exposing sensitive configuration details intended to remain private or restricted to backend processes. The issue has been resolved in version 0.3.75 of the @backstage/plugin-app-backend package. As a temporary measure, avoid supplying secrets using the APP_CONFIG_ configuration pattern. Consider alternative methods for setting secrets, such as the environment substitution available for Backstage configuration. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| path-to-regexp turns path strings into a regular expressions. In certain cases, path-to-regexp will output a regular expression that can be exploited to cause poor performance. Because JavaScript is single threaded and regex matching runs on the main thread, poor performance will block the event loop and lead to a DoS. The bad regular expression is generated any time you have two parameters within a single segment, separated by something that is not a period (.). For users of 0.1, upgrade to 0.1.10. All other users should upgrade to 8.0.0. |
| A flaw was found in Undertow. Servlets using a method that calls HttpServletRequestImpl.getParameterNames() can cause an OutOfMemoryError when the client sends a request with large parameter names. This issue can be exploited by an unauthorized user to cause a remote denial-of-service (DoS) attack. |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| A vulnerability was found in Undertow. This issue requires enabling the learning-push handler in the server's config, which is disabled by default, leaving the maxAge config in the handler unconfigured. The default is -1, which makes the handler vulnerable. If someone overwrites that config, the server is not subject to the attack. The attacker needs to be able to reach the server with a normal HTTP request. |
| A flaw was found in kubevirt. A user within a virtual machine (VM), if the guest agent is active, can exploit this by causing the agent to report an excessive number of network interfaces. This action can overwhelm the system's ability to store VM configuration updates, effectively blocking changes to the Virtual Machine Instance (VMI). This allows the VM user to restrict the VM administrator's ability to manage the VM, leading to a denial of service for administrative operations. |
| golang-jwt is a Go implementation of JSON Web Tokens. Starting in version 3.2.0 and prior to versions 5.2.2 and 4.5.2, the function parse.ParseUnverified splits (via a call to strings.Split) its argument (which is untrusted data) on periods. As a result, in the face of a malicious request whose Authorization header consists of Bearer followed by many period characters, a call to that function incurs allocations to the tune of O(n) bytes (where n stands for the length of the function's argument), with a constant factor of about 16. This issue is fixed in 5.2.2 and 4.5.2. |
| A flaw was found in Ansible. The ansible-core `user` module can allow an unprivileged user to silently create or replace the contents of any file on any system path and take ownership of it when a privileged user executes the `user` module against the unprivileged user's home directory. If the unprivileged user has traversal permissions on the directory containing the exploited target file, they retain full control over the contents of the file as its owner. |
| A vulnerability was found in the Cryostat HTTP API. Cryostat's HTTP API binds to all network interfaces, allowing possible external visibility and access to the API port if Network Policies are disabled, allowing an unauthenticated, malicious attacker to jeopardize the environment. |
| A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks. |
| A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system. |
| A security vulnerability has been discovered within rpm-ostree, pertaining to the /etc/shadow file in default builds having the world-readable bit enabled. This issue arises from the default permissions being set at a higher level than recommended, potentially exposing sensitive authentication data to unauthorized access. |
| A privilege escalation from host to domain vulnerability was found in the FreeIPA project. The FreeIPA package fails to validate the uniqueness of the `krbCanonicalName` for the admin account by default, allowing users to create services with the same canonical name as the REALM admin. When a successful attack happens, the user can retrieve a Kerberos ticket in the name of this service, containing the admin@REALM credential. This flaw allows an attacker to perform administrative tasks over the REALM, leading to access to sensitive data and sensitive data exfiltration. |
| Improper Input Validation vulnerability in pbkdf2 allows Signature Spoofing by Improper Validation.This issue affects pbkdf2: <=3.1.2. |
