| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exclusive map memory leak
When excl_prog_hash is 0 and excl_prog_hash_size is non-zero, the map also
needs to be freed. Otherwise, the map memory will not be reclaimed, just
like the memory leak problem reported by syzbot [1].
syzbot reported:
BUG: memory leak
backtrace (crc 7b9fb9b4):
map_create+0x322/0x11e0 kernel/bpf/syscall.c:1512
__sys_bpf+0x3556/0x3610 kernel/bpf/syscall.c:6131 |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: prevent NULL pointer deref during reload
Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.
To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.
Add proper unroll of filters in ice_start_eth().
Reproduction:
$watch -n 0.1 -d 'ethtool -g enp24s0f0np0'
$devlink dev reload pci/0000:18:00.0 action driver_reinit
Call trace before fix:
[66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000
[66303.926259] #PF: supervisor read access in kernel mode
[66303.926286] #PF: error_code(0x0000) - not-present page
[66303.926311] PGD 0 P4D 0
[66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI
[66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1
[66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice]
[66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48
[66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246
[66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48
[66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000
[66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000
[66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000
[66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50
[66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000
[66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0
[66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[66303.927060] PKRU: 55555554
[66303.927075] Call Trace:
[66303.927094] <TASK>
[66303.927111] ? __die+0x23/0x70
[66303.927140] ? page_fault_oops+0x171/0x4e0
[66303.927176] ? exc_page_fault+0x7f/0x180
[66303.927209] ? asm_exc_page_fault+0x26/0x30
[66303.927244] ? ice_get_ringparam+0x22/0x50 [ice]
[66303.927433] rings_prepare_data+0x62/0x80
[66303.927469] ethnl_default_doit+0xe2/0x350
[66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140
[66303.927538] genl_rcv_msg+0x1b1/0x2c0
[66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10
[66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10
[66303.927615] netlink_rcv_skb+0x58/0x110
[66303.927644] genl_rcv+0x28/0x40
[66303.927665] netlink_unicast+0x19e/0x290
[66303.927691] netlink_sendmsg+0x254/0x4d0
[66303.927717] sock_sendmsg+0x93/0xa0
[66303.927743] __sys_sendto+0x126/0x170
[66303.927780] __x64_sys_sendto+0x24/0x30
[66303.928593] do_syscall_64+0x5d/0x90
[66303.929370] ? __count_memcg_events+0x60/0xa0
[66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30
[66303.930920] ? handle_mm_fault+0x9e/0x350
[66303.931688] ? do_user_addr_fault+0x258/0x740
[66303.932452] ? exc_page_fault+0x7f/0x180
[66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: Fix oops when removing custom query handlers
When removing custom query handlers, the handler might still
be used inside the EC query workqueue, causing a kernel oops
if the module holding the callback function was already unloaded.
Fix this by flushing the EC query workqueue when removing
custom query handlers.
Tested on a Acer Travelmate 4002WLMi |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix an integer overflow in aie2_query_ctx_status_array()
The unpublished smatch static checker reported a warning.
drivers/accel/amdxdna/aie2_pci.c:904 aie2_query_ctx_status_array()
warn: potential user controlled sizeof overflow
'args->num_element * args->element_size' '1-u32max(user) * 1-u32max(user)'
Even this will not cause a real issue, it is better to put a reasonable
limitation for element_size and num_element. Add condition to make sure
the input element_size <= 4K and num_element <= 1K. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: avoid out of bounds access in decode_preauth_ctxt()
Confirm that the accessed pneg_ctxt->HashAlgorithms address sits within
the SMB request boundary; deassemble_neg_contexts() only checks that the
eight byte smb2_neg_context header + (client controlled) DataLength are
within the packet boundary, which is insufficient.
Checking for sizeof(struct smb2_preauth_neg_context) is overkill given
that the type currently assumes SMB311_SALT_SIZE bytes of trailing Salt. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: pretend $Extend records as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. |
| In the Linux kernel, the following vulnerability has been resolved:
dm integrity: Fix UAF in dm_integrity_dtr()
Dm_integrity also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in dm_integrity_dtr(). |
| In the Linux kernel, the following vulnerability has been resolved:
tee: fix register_shm_helper()
In register_shm_helper(), fix incorrect error handling for a call to
iov_iter_extract_pages(). A case is missing for when
iov_iter_extract_pages() only got some pages and return a number larger
than 0, but not the requested amount.
This fixes a possible NULL pointer dereference following a bad input from
ioctl(TEE_IOC_SHM_REGISTER) where parts of the buffer isn't mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups
of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
kfd_lookup_process_by_pid hold the kfd process reference to ensure it
doesn't get destroyed while sending the segfault event to user space.
Calling kfd_lookup_process_by_pid as function parameter leaks the kfd
process refcount and miss the NULL pointer check if app process is
already destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link()
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.
Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.
Also handle fwnode_graph_get_port_parent() failures.
In order to fix these issues, add an error handling path to the function
and the needed gotos. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU in ip6_output()
Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent
possible UAF.
We can remove rcu_read_lock()/rcu_read_unlock() pairs
from ip6_finish_output2(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: transport_ipc: validate payload size before reading handle
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_vdpa: fix the crash in unmap a large memory
While testing in vIOMMU, sometimes Guest will unmap very large memory,
which will cause the crash. To fix this, add a new function
vhost_vdpa_general_unmap(). This function will only unmap the memory
that saved in iotlb.
Call Trace:
[ 647.820144] ------------[ cut here ]------------
[ 647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174!
[ 647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62
[ 647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4
[ 647.824365] RIP: 0010:domain_unmap+0x48/0x110
[ 647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59
[ 647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202
[ 647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b
[ 647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540
[ 647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003
[ 647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff
[ 647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000
[ 647.834782] FS: 00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000
[ 647.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0
[ 647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 647.840666] Call Trace:
[ 647.841437] <TASK>
[ 647.842107] intel_iommu_unmap_pages+0x93/0x140
[ 647.843112] __iommu_unmap+0x91/0x1b0
[ 647.844003] iommu_unmap+0x6a/0x95
[ 647.844885] vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa]
[ 647.845985] vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa]
[ 647.847235] ? _raw_spin_unlock+0x15/0x30
[ 647.848181] ? _copy_from_iter+0x8c/0x580
[ 647.849137] vhost_chr_write_iter+0xb3/0x430 [vhost]
[ 647.850126] vfs_write+0x1e4/0x3a0
[ 647.850897] ksys_write+0x53/0xd0
[ 647.851688] do_syscall_64+0x3a/0x90
[ 647.852508] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 647.853457] RIP: 0033:0x7f7734ef9f4f
[ 647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8
[ 647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f
[ 647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010
[ 647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000
[ 647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010
[ 647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000
[ 647.864692] </TASK>
[ 647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v]
[ 647.874688] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: ETR: Fix ETR buffer use-after-free issue
When ETR is enabled as CS_MODE_SYSFS, if the buffer size is changed
and enabled again, currently sysfs_buf will point to the newly
allocated memory(buf_new) and free the old memory(buf_old). But the
etr_buf that is being used by the ETR remains pointed to buf_old, not
updated to buf_new. In this case, it will result in a memory
use-after-free issue.
Fix this by checking ETR's mode before updating and releasing buf_old,
if the mode is CS_MODE_SYSFS, then skip updating and releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corrupted
There's issue when file system corrupted:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1289!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-next
RIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0
RSP: 0018:ffff888117aafa30 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534
RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010
RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0
Call Trace:
<TASK>
__ext4_journal_get_create_access+0x42/0x170
ext4_getblk+0x319/0x6f0
ext4_bread+0x11/0x100
ext4_append+0x1e6/0x4a0
ext4_init_new_dir+0x145/0x1d0
ext4_mkdir+0x326/0x920
vfs_mkdir+0x45c/0x740
do_mkdirat+0x234/0x2f0
__x64_sys_mkdir+0xd6/0x120
do_syscall_64+0x5f/0xfa0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue occurs with us in errors=continue mode when accompanied by
storage failures. There have been many inconsistencies in the file system
data.
In the case of file system data inconsistency, for example, if the block
bitmap of a referenced block is not set, it can lead to the situation where
a block being committed is allocated and used again. As a result, the
following condition will not be satisfied then trigger BUG_ON. Of course,
it is entirely possible to construct a problematic image that can trigger
this BUG_ON through specific operations. In fact, I have constructed such
an image and easily reproduced this issue.
Therefore, J_ASSERT() holds true only under ideal conditions, but it may
not necessarily be satisfied in exceptional scenarios. Using J_ASSERT()
directly in abnormal situations would cause the system to crash, which is
clearly not what we want. So here we directly trigger a JBD abort instead
of immediately invoking BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix crash in nfsd4_read_release()
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work
The origin code calls cancel_delayed_work() in ocelot_stats_deinit()
to cancel the cyclic delayed work item ocelot->stats_work. However,
cancel_delayed_work() may fail to cancel the work item if it is already
executing. While destroy_workqueue() does wait for all pending work items
in the work queue to complete before destroying the work queue, it cannot
prevent the delayed work item from being rescheduled within the
ocelot_check_stats_work() function. This limitation exists because the
delayed work item is only enqueued into the work queue after its timer
expires. Before the timer expiration, destroy_workqueue() has no visibility
of this pending work item. Once the work queue appears empty,
destroy_workqueue() proceeds with destruction. When the timer eventually
expires, the delayed work item gets queued again, leading to the following
warning:
workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats
WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0
...
RIP: 0010:__queue_work+0x875/0xaf0
...
RSP: 0018:ffff88806d108b10 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88
RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2
R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000
R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0
FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0
Call Trace:
<IRQ>
? kasan_report+0xc6/0xf0
? __pfx_delayed_work_timer_fn+0x10/0x10
? __pfx_delayed_work_timer_fn+0x10/0x10
call_timer_fn+0x25/0x1c0
__run_timer_base.part.0+0x3be/0x8c0
? __pfx_delayed_work_timer_fn+0x10/0x10
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x1c0/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
The following diagram reveals the cause of the above warning:
CPU 0 (remove) | CPU 1 (delayed work callback)
mscc_ocelot_remove() |
ocelot_deinit() | ocelot_check_stats_work()
ocelot_stats_deinit() |
cancel_delayed_work()| ...
| queue_delayed_work()
destroy_workqueue() | (wait a time)
| __queue_work() //UAF
The above scenario actually constitutes a UAF vulnerability.
The ocelot_stats_deinit() is only invoked when initialization
failure or resource destruction, so we must ensure that any
delayed work items cannot be rescheduled.
Replace cancel_delayed_work() with disable_delayed_work_sync()
to guarantee proper cancellation of the delayed work item and
ensure completion of any currently executing work before the
workqueue is deallocated.
A deadlock concern was considered: ocelot_stats_deinit() is called
in a process context and is not holding any locks that the delayed
work item might also need. Therefore, the use of the _sync() variant
is safe here.
This bug was identified through static analysis. To reproduce the
issue and validate the fix, I simulated ocelot-swit
---truncated--- |
