| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled
When the caching for a cookie is temporarily disabled (e.g. due to a DIO
write on that file), future copying to the cache for that file is disabled
until all fds open on that file are closed. However, if netfslib is using
the deprecated PG_private_2 method (such as is currently used by ceph), and
decides it wants to copy to the cache, netfs_advance_write() will just bail
at the first check seeing that the cache stream is unavailable, and
indicate that it dealt with all the content.
This means that we have no subrequests to provide notifications to drive
the state machine or even to pin the request and the request just gets
discarded, leaving the folios with PG_private_2 set.
Fix this by jumping directly to cancel the request if the cache is not
available. That way, we don't remove mark3 from the folio_queue list and
netfs_pgpriv2_cancel() will clean up the folios.
This was found by running the generic/013 xfstest against ceph with an
active cache and the "-o fsc" option passed to ceph. That would usually
hang |
| mudler/localai version 2.17.1 is vulnerable to a Timing Attack. This type of side-channel attack allows an attacker to compromise the cryptosystem by analyzing the time taken to execute cryptographic algorithms. Specifically, in the context of password handling, an attacker can determine valid login credentials based on the server's response time, potentially leading to unauthorized access. |
| In mintplex-labs/anything-llm versions up to and including 1.5.3, an issue was discovered where the password hash of a user is returned in the response after login (`POST /api/request-token`) and after account creations (`POST /api/admin/users/new`). This exposure occurs because the entire User object, including the bcrypt password hash, is included in the response sent to the frontend. This practice could potentially lead to sensitive information exposure despite the use of bcrypt, a strong hashing algorithm. It is recommended not to expose any clues about passwords to the frontend. |
| In lunary-ai/lunary versions up to and including 1.2.5, an information disclosure vulnerability exists where account recovery hashes of users are inadvertently exposed to unauthorized actors. This issue occurs when authenticated users inspect responses from `GET /v1/users/me` and `GET /v1/users/me/org` endpoints. The exposed account recovery hashes, while not directly related to user passwords, represent sensitive information that should not be accessible to unauthorized parties. Exposing these hashes could potentially facilitate account recovery attacks or other malicious activities. The vulnerability was addressed in version 1.2.6. |
| In lunary-ai/lunary version 1.2.4, an account takeover vulnerability exists due to the exposure of password recovery tokens in API responses. Specifically, when a user initiates the password reset process, the recovery token is included in the response of the `GET /v1/users/me/org` endpoint, which lists all users in a team. This allows any authenticated user to capture the recovery token of another user and subsequently change that user's password without consent, effectively taking over the account. The issue lies in the inclusion of the `recovery_token` attribute in the users object returned by the API. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.
This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...
Just fix the damn thing. |
| In the Linux kernel, the following vulnerability has been resolved:
highmem: fix checks in __kmap_local_sched_{in,out}
When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are
initialized with 0 value, but the check is done with pte_none. 0 pte
however does not necessarily mean that pte_none will return true. e.g.
on xtensa it returns false, resulting in the following runtime warnings:
WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_out+0x51/0x108
__schedule+0x71a/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_in+0x50/0xe0
finish_task_switch$isra$0+0x1ce/0x2f8
__schedule+0x86e/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. |
| IBM Aspera 5.0.0 through 5.0.13.1
could disclose sensitive user information from the system to an authenticated user due to an observable discrepancy of returned data. |
| Creacast Creabox Manager 4.4.4 exposes sensitive configuration data via a publicly accessible endpoint /get. When accessed, this endpoint returns internal configuration including the creacodec.lua file, which contains plaintext admin credentials. |
| The 2wcom IP-4c 2.15.5 device's web interface includes an information disclosure vulnerability. By sending a crafted POST request to a specific endpoint (/cwi/ajax_request/get_data.php), an authenticated attacker (even with a low-privileged account like guest) can retrieve the hashed passwords for the admin, manager, and guest accounts. This significantly weakens the system's security posture, as these hashes could be cracked offline, granting attackers administrative access to the device. |
| Improper Input Validation vulnerability in TOTOLINK X6000R allows Command Injection, File Manipulation.This issue affects X6000R: through V9.4.0cu.1360_B20241207. |
| MSI Afterburner v4.6.5.16370 is vulnerable to a Kernel Memory Leak vulnerability by triggering the 0x80002040 IOCTL code of the RTCore64.sys driver. The handle to the driver can only be obtained from a high integrity process. |
| User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint. |
| Cleartext Storage of Sensitive Information, Exposure of Sensitive Information Through Data Queries vulnerability in Finrota Netahsilat allows Retrieve Embedded Sensitive Data, Authentication Bypass, IMAP/SMTP Command Injection, Collect Data from Common Resource Locations.
This issue solved in versions 1.21.10, 1.23.01, 1.23.08, 1.23.11 and 1.24.03. |
| Ecava IntegraXor SCADA Server Stable 4.1.4360 and earlier and Beta 4.1.4392 and earlier allows remote attackers to discover full pathnames via an application tag. |
| The AXN-NET Ethernet module accessory 3.04 for the Accuenergy Acuvim II allows remote attackers to discover passwords and modify settings via vectors involving JavaScript. |
| Ecava IntegraXor before 4.1.4393 allows remote attackers to read cleartext credentials for administrative accounts via SELECT statements that leverage the guest role. |
| Next.js is a React framework for building full-stack web applications. To mitigate CVE-2025-29927, Next.js validated the x-middleware-subrequest-id which persisted across multiple incoming requests. However, this subrequest ID is sent to all requests, even if the destination is not the same host as the Next.js application. Initiating a fetch request to a third-party within Middleware will send the x-middleware-subrequest-id to that third party. This vulnerability is fixed in 12.3.6, 13.5.10, 14.2.26, and 15.2.4. |
| The Blackmagic Web Presenter HD firmware version 3.3 exposes sensitive information via an unauthenticated Telnet service on port 9977. When connected, the service reveals extensive device configuration data including: - Model, version, and unique identifiers - Network settings including IP, MAC, DNS - Current stream platform, stream key, and streaming URL - Audio/video configuration This data can be used to hijack live streams or perform network reconnaissance. |
| Mage AI allows remote unauthenticated attackers to leak the terminal server command history of arbitrary users |
