| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SMB dissector in Ethereal 0.9.3 and earlier allows remote attackers to cause a denial of service (crash) or execute arbitrary code via malformed packets that cause Ethereal to dereference a NULL pointer. |
| The dissect_attribute_value_pairs function in packet-radius.c for Ethereal 0.8.13 to 0.10.2 allows remote attackers to cause a denial of service (crash) via a malformed RADIUS packet that triggers a null dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| Null pointer dereference in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network. |
| The application does not validate the presence of required appearance (AP) data before accessing stamp annotation resources. When a PDF contains a stamp annotation missing its AP entry, the code continues to dereference the associated object without a prior null or validity check, which allows a crafted document to trigger a null pointer dereference and crash the application, resulting in denial of service. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| A bug in the filesystem traversal fallback path causes fs/diriterate/diriterate.go:Next() to overindex an empty slice when ReadDir returns nil for an empty directory, resulting in a panic (index out of range) and an application crash (denial of service) in OSV-SCALIBR. |
| Team ENVY, a Security Research TEAM has found a flaw that allows for a remote code execution on the NVR. If an attacker does not enter any value for a specific URL parameter, NULL pointer references will occur and the NVR will reboot. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| PAM-PKCS#11 is a Linux-PAM login module that allows a X.509 certificate based user login. In versions 0.6.12 and prior, the pam_pkcs11 module segfaults when a user presses ctrl-c/ctrl-d when they are asked for a PIN. When a user enters no PIN at all, `pam_get_pwd` will never initialize the password buffer pointer and as such `cleanse` will try to dereference an uninitialized pointer. On my system this pointer happens to have the value 3 most of the time when running sudo and as such it will segfault. The most likely impact to a system affected by this issue is an availability impact due to a daemon that uses PAM crashing. As of time of publication, a patch for the issue is unavailable. |
| NULL pointer dereference in the MMS Client in MZ Automation LibIEC1850 before commit 7afa40390b26ad1f4cf93deaa0052fe7e357ef33 allows a malicious server to Cause a Denial-of-Service via the MMS InitiationResponse message. |
| NVIDIA Display Driver for Linux contains a vulnerability in the kernel driver, where a user could cause a null pointer dereference by allocating a specific memory resource. A successful exploit of this vulnerability might lead to denial of service. |
| Netskope was notified about a potential gap in its agent (NS Client) on Windows systems. If this gap is successfully exploited, a local, authenticated user with Administrator privileges can improperly load the driver as a generic kernel service. This triggers the flaw, causing a system crash (Blue-Screen-of-Death) and resulting in a Denial of Service (DoS) for the affected machine. |
| A flaw was found in the 389-ds-base LDAP Server. This issue occurs when issuing a Modify DN LDAP operation through the ldap protocol, when the function return value is not tested and a NULL pointer is dereferenced. If a privileged user performs a ldap MODDN operation after a failed operation, it could lead to a Denial of Service (DoS) or system crash. |
| ECMA-262 is the language specification for the scripting language ECMAScript. A problem in the ECMAScript (JavaScript) specification of async generators, introduced by a May 2021 spec refactor, may lead to mis-implementation in a way that could present as a security vulnerability, such as type confusion and pointer dereference.
The internal async generator machinery calls regular promise resolver functions on IteratorResult (`{ done, value }`) objects that it creates, assuming that the IteratorResult objects will not be then-ables. Unfortunately, these IteratorResult objects inherit from `Object.prototype`, so these IteratorResult objects can be made then-able, triggering arbitrary behaviour, including re-entering the async generator machinery in a way that violates some internal invariants.
The ECMAScript specification is a living standard and the issue has been addressed at the time of this advisory's public disclosure. JavaScript engine implementors should refer to the latest specification and update their implementations to comply with the `AsyncGenerator` section.
## References
- https://github.com/tc39/ecma262/commit/1e24a286d0a327d08e1154926b3ee79820232727
- https://bugzilla.mozilla.org/show_bug.cgi?id=1901411
- https://github.com/boa-dev/boa/security/advisories/GHSA-f67q-wr6w-23jq
- https://bugs.webkit.org/show_bug.cgi?id=275407
- https://issues.chromium.org/issues/346692561
- https://www.cve.org/CVERecord?id=CVE-2024-7652 |
| A vulnerability was found in HTACG tidy-html5 5.8.0. It has been declared as problematic. This vulnerability affects the function InsertNodeAsParent of the file src/parser.c. The manipulation leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
| A NULL pointer dereference vulnerability has been identified in the JavaScript library microlight version 0.0.7, a lightweight syntax highlighting library. When processing elements with non-standard CSS color values, the library fails to validate the result of a regular expression match before accessing its properties, leading to an uncaught TypeError and potential application crash. NOTE: this is disputed by multiple parties because there is no common scenario in which an adversary can insert those non-standard values. |
| A null pointer dereference vulnerability in Macrium Reflect prior to 8.1.8017 allows a local attacker to cause a system crash or potentially elevate their privileges via executing a specially crafted executable. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid NULL dereference when chunk data buffer is missing
chunk->skb pointer is dereferenced in the if-block where it's supposed
to be NULL only.
chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_list
instead and do it just before replacing chunk->skb. We're sure that
otherwise chunk->skb is non-NULL because of outer if() condition. |
| A nil pointer dereference in PingCAP TiDB v8.2.0-alpha-216-gfe5858b allows attackers to crash the application via expression.inferCollation. |
