| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: protect concurrent access to mem_cgroup_idr
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/purgatory: align riscv_kernel_entry
When alignment handling is delegated to the kernel, everything must be
word-aligned in purgatory, since the trap handler is then set to the
kexec one. Without the alignment, hitting the exception would
ultimately crash. On other occasions, the kernel's handler would take
care of exceptions.
This has been tested on a JH7110 SoC with oreboot and its SBI delegating
unaligned access exceptions and the kernel configured to handle them. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: rename cpu_number1 to dummy_cpu_number
The per cpu variable cpu_number1 is passed to xlnx_event_handler as
argument "dev_id", but it is not used in this function. So drop the
initialization of this variable and rename it to dummy_cpu_number.
This patch is to fix the following call trace when the kernel option
CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53
Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT)
Call trace:
dump_backtrace+0xd0/0xe0
show_stack+0x18/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x10c/0x140
__might_sleep+0x4c/0xa0
__kmem_cache_alloc_node+0xf4/0x168
kmalloc_trace+0x28/0x38
__request_percpu_irq+0x74/0x138
xlnx_event_manager_probe+0xf8/0x298
platform_probe+0x68/0xd8 |
| In the Linux kernel, the following vulnerability has been resolved:
lib: objagg: Fix general protection fault
The library supports aggregation of objects into other objects only if
the parent object does not have a parent itself. That is, nesting is not
supported.
Aggregation happens in two cases: Without and with hints, where hints
are a pre-computed recommendation on how to aggregate the provided
objects.
Nesting is not possible in the first case due to a check that prevents
it, but in the second case there is no check because the assumption is
that nesting cannot happen when creating objects based on hints. The
violation of this assumption leads to various warnings and eventually to
a general protection fault [1].
Before fixing the root cause, error out when nesting happens and warn.
[1]
general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: avoid reporting connection success with wrong SSID
When user issues a connection with a different SSID than the one
virt_wifi has advertised, the __cfg80211_connect_result() will
trigger the warning: WARN_ON(bss_not_found).
The issue is because the connection code in virt_wifi does not
check the SSID from user space (it only checks the BSSID), and
virt_wifi will call cfg80211_connect_result() with WLAN_STATUS_SUCCESS
even if the SSID is different from the one virt_wifi has advertised.
Eventually cfg80211 won't be able to find the cfg80211_bss and generate
the warning.
Fixed it by checking the SSID (from user space) in the connection code. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix napi_skb_cache_put warning
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Don't call folio_wait_writeback() without a folio reference
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: missing check virtio
Two missing check in virtio_net_hdr_to_skb() allowed syzbot
to crash kernels again
1. After the skb_segment function the buffer may become non-linear
(nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere
the __skb_linearize function will not be executed, then the buffer will
remain non-linear. Then the condition (offset >= skb_headlen(skb))
becomes true, which causes WARN_ON_ONCE in skb_checksum_help.
2. The struct sk_buff and struct virtio_net_hdr members must be
mathematically related.
(gso_size) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) may be 0 if division is without remainder.
offset+2 (4191) > skb_headlen() (1116)
WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303
Modules linked in:
CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303
Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef
RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209
RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001
RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c
R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d
FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777
ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584
ip_finish_output_gso net/ipv4/ip_output.c:286 [inline]
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:451 [inline]
ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129
iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline]
sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3545 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561
__dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Found by Linux Verification Center (linuxtesting.org) with Syzkaller |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: properly dereference pe in ip_vs_add_service
Use pe directly to resolve sparse warning:
net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression |
| In the Linux kernel, the following vulnerability has been resolved:
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
The following splat is easy to reproduce upstream as well as in -stable
kernels. Florian Westphal provided the following commit:
d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net")
but this complementary fix has been also suggested by Willem de Bruijn
and it can be easily backported to -stable kernel which consists in
using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat
given __skb_get_hash() is used by the nftables tracing infrastructure to
to identify packets in traces.
[69133.561393] ------------[ cut here ]------------
[69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/
[...]
[69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379
[69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0
[69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff
ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8
[69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246
[69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19
[69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418
[69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000
[69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400
[69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28
[69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0
[69133.562040] Call Trace:
[69133.562044] <IRQ>
[69133.562049] ? __warn+0x9f/0x1a0
[ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860
[...]
[ 1211.841496] ? bpf_flow_dissect+0x160/0x160
[ 1211.841753] __skb_get_hash+0x97/0x280
[ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230
[ 1211.841776] ? mod_find+0xbf/0xe0
[ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0
[ 1211.841798] ? bpf_ksym_find+0x56/0xe0
[ 1211.841807] ? __rcu_read_unlock+0x2a/0x70
[ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables]
[ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables]
[ 1211.841964] ? get_stack_info+0x2b/0x80
[ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables]
[ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables] |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Don't lose track of restrictions on cred_transfer
When a process' cred struct is replaced, this _almost_ always invokes
the cred_prepare LSM hook; but in one special case (when
KEYCTL_SESSION_TO_PARENT updates the parent's credentials), the
cred_transfer LSM hook is used instead. Landlock only implements the
cred_prepare hook, not cred_transfer, so KEYCTL_SESSION_TO_PARENT causes
all information on Landlock restrictions to be lost.
This basically means that a process with the ability to use the fork()
and keyctl() syscalls can get rid of all Landlock restrictions on
itself.
Fix it by adding a cred_transfer hook that does the same thing as the
existing cred_prepare hook. (Implemented by having hook_cred_prepare()
call hook_cred_transfer() so that the two functions are less likely to
accidentally diverge in the future.) |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed
If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log->page_size will change in
log_replay(), but log->page_{mask,bits} don't change correspondingly.
This will cause a panic because "u32 bytes = log->page_size - page_off"
will get a negative value in the later read_log_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to don't dirty inode for readonly filesystem
syzbot reports f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:933!
RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933
Call Trace:
evict+0x2a4/0x620 fs/inode.c:664
dispose_list fs/inode.c:697 [inline]
evict_inodes+0x5f8/0x690 fs/inode.c:747
generic_shutdown_super+0x9d/0x2c0 fs/super.c:675
kill_block_super+0x44/0x90 fs/super.c:1667
kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894
deactivate_locked_super+0xc1/0x130 fs/super.c:484
cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256
task_work_run+0x24a/0x300 kernel/task_work.c:180
ptrace_notify+0x2cd/0x380 kernel/signal.c:2399
ptrace_report_syscall include/linux/ptrace.h:411 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline]
syscall_exit_work kernel/entry/common.c:251 [inline]
syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296
do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The root cause is:
- do_sys_open
- f2fs_lookup
- __f2fs_find_entry
- f2fs_i_depth_write
- f2fs_mark_inode_dirty_sync
- f2fs_dirty_inode
- set_inode_flag(inode, FI_DIRTY_INODE)
- umount
- kill_f2fs_super
- kill_block_super
- generic_shutdown_super
- sync_filesystem
: sb is readonly, skip sync_filesystem()
- evict_inodes
- iput
- f2fs_evict_inode
- f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE))
: trigger kernel panic
When we try to repair i_current_depth in readonly filesystem, let's
skip dirty inode to avoid panic in later f2fs_evict_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Add a per-VF limit on number of FDIR filters
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imx-irqsteer: Handle runtime power management correctly
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
mkdir /mnt/test/comp
f2fs_io setflags compression /mnt/test/comp
dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1
truncate --size 13 /mnt/test/comp/testfile
In the above scenario, we can get a BUG_ON.
kernel BUG at fs/f2fs/segment.c:3589!
Call Trace:
do_write_page+0x78/0x390 [f2fs]
f2fs_outplace_write_data+0x62/0xb0 [f2fs]
f2fs_do_write_data_page+0x275/0x740 [f2fs]
f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs]
f2fs_write_multi_pages+0x1e5/0xae0 [f2fs]
f2fs_write_cache_pages+0xab1/0xc60 [f2fs]
f2fs_write_data_pages+0x2d8/0x330 [f2fs]
do_writepages+0xcf/0x270
__writeback_single_inode+0x44/0x350
writeback_sb_inodes+0x242/0x530
__writeback_inodes_wb+0x54/0xf0
wb_writeback+0x192/0x310
wb_workfn+0x30d/0x400
The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the
page was set the gcing flag by set_cluster_dirty(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mos7840: fix crash on resume
Since commit c49cfa917025 ("USB: serial: use generic method if no
alternative is provided in usb serial layer"), USB serial core calls the
generic resume implementation when the driver has not provided one.
This can trigger a crash on resume with mos7840 since support for
multiple read URBs was added back in 2011. Specifically, both port read
URBs are now submitted on resume for open ports, but the context pointer
of the second URB is left set to the core rather than mos7840 port
structure.
Fix this by implementing dedicated suspend and resume functions for
mos7840.
Tested with Delock 87414 USB 2.0 to 4x serial adapter.
[ johan: analyse crash and rewrite commit message; set busy flag on
resume; drop bulk-in check; drop unnecessary usb_kill_urb() ] |
