| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in SeriaWei ZKEACMS up to 4.3. This affects the function Delete of the file src/ZKEACMS.Redirection/Controllers/UrlRedirectionController.cs of the component POST Request Handler. The manipulation leads to improper authorization. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An attacker could take over a Looker account in a Looker instance configured with OIDC authentication, due to email address string normalization.Looker-hosted and Self-hosted were found to be vulnerable.
This issue has already been mitigated for Looker-hosted.
Self-hosted instances must be upgraded as soon as possible. This vulnerability has been patched in all supported versions of Self-hosted.
The versions below have all been updated to protect from this vulnerability. You can download these versions at the Looker download page https://download.looker.com/ :
* 24.12.100+
* 24.18.193+
* 25.0.69+
* 25.6.57+
* 25.8.39+
* 25.10.22+
* 25.12.0+ |
| A security vulnerability has been detected in Public Knowledge Project omp and ojs 3.3.0/3.4.0/3.5.0. Impacted is an unknown function of the file plugins/paymethod/manual/templates/paymentForm.tpl of the component Payment Instructions Setting Handler. The manipulation of the argument manualInstructions leads to cross site scripting. The attack can be initiated remotely. You should upgrade the affected component. |
| Tencent PatrickStar merge_checkpoint Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent PatrickStar. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the merge_checkpoint endpoint. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27182. |
| Tencent NeuralNLP-NeuralClassifier _load_checkpoint Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent NeuralNLP-NeuralClassifier. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the _load_checkpoint function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27184. |
| Tencent HunyuanVideo load_vae Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent HunyuanVideo. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the load_vae function.The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27186. |
| A vulnerability was determined in jairiidriss RestaurantWebsite up to e7911f12d035e8e2f9a75e7a28b59e4ef5c1d654. Impacted is an unknown function of the component Make a Reservation. This manipulation of the argument selected_date causes cross site scripting. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in nocobase up to 1.9.4/2.0.0-alpha.37. The affected element is an unknown function of the file nocobase\packages\core\auth\src\base\jwt-service.ts of the component JWT Service. The manipulation of the argument API_KEY results in use of hard-coded cryptographic key
. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface.
This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device. |
| A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.
For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| A vulnerability in the IPv6 Router Advertisement (RA) packet processing of Cisco Access Point Software could allow an unauthenticated, adjacent attacker to modify the IPv6 gateway on an affected device.
This vulnerability is due to a logic error in the processing of IPv6 RA packets that are received from wireless clients. An attacker could exploit this vulnerability by associating to a wireless network and sending a series of crafted IPv6 RA packets. A successful exploit could allow the attacker to temporarily change the IPv6 gateway of an affected device. This could also lead to intermittent packet loss for any wireless clients that are associated with the affected device. |
| A vulnerability classified as problematic has been found in Audi Universal Traffic Recorder App 2.0. Affected is an unknown function of the component FTP Credentials. The manipulation leads to use of hard-coded password. Attacking locally is a requirement. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 2.89 and 2.90 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early about these issues and acted very professional. Version 2.89 is fixing this issue for new customers and 2.90 is going to fix it for existing customers. |
| A vulnerability, which was classified as critical, has been found in Audi UTR Dashcam 2.0. Affected by this issue is some unknown functionality of the component Command API. The manipulation leads to improper access controls. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. Upgrading to version 2.89 and 2.90 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early about these issues and acted very professional. Version 2.89 is fixing this issue for new customers and 2.90 is going to fix it for existing customers. |
| CyberGhostVPNSetup.exe (Windows installer) is signed using the weak cryptographic hash algorithm SHA-1, which is vulnerable to collision attacks. This allows a malicious actor to craft a fake installer with a forged SHA-1 certificate that may still be accepted by Windows signature verification mechanisms, particularly on systems without strict SmartScreen or trust policy enforcement. Additionally, the installer lacks High Entropy Address Space Layout Randomization (ASLR), as confirmed by BinSkim (BA2015 rule) and repeated WinDbg analysis. The binary consistently loads into predictable memory ranges, increasing the success rate of memory corruption exploits. These two misconfigurations, when combined, significantly lower the bar for successful supply-chain style attacks or privilege escalation through fake installers. |
| The MCP Python SDK, called `mcp` on PyPI, is a Python implementation of the Model Context Protocol (MCP). Prior to version 1.10.0, if a client deliberately triggers an exception after establishing a streamable HTTP session, this can lead to an uncaught ClosedResourceError on the server side, causing the server to crash and requiring a restart to restore service. Impact may vary depending on the deployment conditions, and presence of infrastructure-level resilience measures. Version 1.10.0 contains a patch for the issue. |
| The Job Iteration API is an an extension for ActiveJob that make jobs interruptible and resumable Versions prior to 1.11.0 have an arbitrary code execution vulnerability in the `CsvEnumerator` class. This vulnerability can be exploited by an attacker to execute arbitrary commands on the system where the application is running, potentially leading to unauthorized access, data leakage, or complete system compromise. The issue is fixed in versions `1.11.0` and above. Users can mitigate the risk by avoiding the use of untrusted input in the `CsvEnumerator` class and ensuring that any file paths are properly sanitized and validated before being passed to the class methods. Users should avoid using the `count_of_rows_in_file` method with untrusted CSV filenames. |
| Micro Registration Utility (µURU) is a telephone self registration utility based on asterisk. In versions up to and including commit 88db9a953f38a3026bcd6816d51c7f3b93c55893, an attacker can crafts a special federation name and characters treated special by asterisk can be injected into the `Dial( )` application due to improper input validation. This allows an attacker to redirect calls on both of the federating instances. If the attack succeeds, the impact is very high. However, the requires that an admin accept the federation requests. As of time of publication, a known patched version of µURU is not available. |
| A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Teledyne FLIR FB-Series O and FLIR FH-Series ID 1.3.2.16 and classified as critical. Affected by this issue is some unknown functionality of the file /priv/production/production.html of the component Production Tools. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
