| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Applications serving static resources through the functional web frameworks WebMvc.fn or WebFlux.fn are vulnerable to path traversal attacks. An attacker can craft malicious HTTP requests and obtain any file on the file system that is also accessible to the process in which the Spring application is running.
Specifically, an application is vulnerable when both of the following are true:
* the web application uses RouterFunctions to serve static resources
* resource handling is explicitly configured with a FileSystemResource location
However, malicious requests are blocked and rejected when any of the following is true:
* the Spring Security HTTP Firewall https://docs.spring.io/spring-security/reference/servlet/exploits/firewall.html is in use
* the application runs on Tomcat or Jetty |
| Debug code left active in AMD's Video Decoder Engine Firmware (VCN FW) could allow a attacker to submit a maliciously crafted command causing the VCN FW to perform read/writes HW registers, potentially impacting confidentiality, integrity and availabilability of the system. |
| Cross-Site Request Forgery (CSRF) vulnerability in loopus WP Attractive Donations System - Easy Stripe & Paypal donations WP_AttractiveDonationsSystem allows Cross Site Request Forgery.This issue affects WP Attractive Donations System - Easy Stripe & Paypal donations: from n/a through <= 1.25. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Explicitly check accesses to bpf_sock_addr
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix mailbox API compatibility by negotiating supported features
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't leak disconnected dentries on umount
When user calls open_by_handle_at() on some inode that is not cached, we
will create disconnected dentry for it. If such dentry is a directory,
exportfs_decode_fh_raw() will then try to connect this dentry to the
dentry tree through reconnect_path(). It may happen for various reasons
(such as corrupted fs or race with rename) that the call to
lookup_one_unlocked() in reconnect_one() will fail to find the dentry we
are trying to reconnect and instead create a new dentry under the
parent. Now this dentry will not be marked as disconnected although the
parent still may well be disconnected (at least in case this
inconsistency happened because the fs is corrupted and .. doesn't point
to the real parent directory). This creates inconsistency in
disconnected flags but AFAICS it was mostly harmless. At least until
commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")
which removed adding of most disconnected dentries to sb->s_anon list.
Thus after this commit cleanup of disconnected dentries implicitely
relies on the fact that dput() will immediately reclaim such dentries.
However when some leaf dentry isn't marked as disconnected, as in the
scenario described above, the reclaim doesn't happen and the dentries
are "leaked". Memory reclaim can eventually reclaim them but otherwise
they stay in memory and if umount comes first, we hit infamous "Busy
inodes after unmount" bug. Make sure all dentries created under a
disconnected parent are marked as disconnected as well. |
| In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks. |
| A vulnerability has been found in Redmine 6.0.0/6.0.1/6.0.2/6.0.3 and classified as problematic. This vulnerability affects unknown code of the component Custom Query Handler. The manipulation of the argument Name leads to cross site scripting. The attack can be initiated remotely. Upgrading to version 6.0.4 is able to address this issue. It is recommended to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III
Anthony Yznaga tracked down that a BUG_ON in ext4 code with large folios
enabled resulted from copy_from_user() returning impossibly large values
greater than the size to be copied. This lead to __copy_from_iter()
returning impossible values instead of the actual number of bytes it was
able to copy.
The BUG_ON has been reported in
https://lore.kernel.org/r/b14f55642207e63e907965e209f6323a0df6dcee.camel@physik.fu-berlin.de
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. The exception handlers expect that
%o2 has already been masked during the bulk copy loop, but the masking was
performed after that loop. This will fix the return value of copy_from_user
and copy_to_user in the faulting case. The behaviour of memcpy stays
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Enforce expected_attach_type for tailcall compatibility
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()
path is very broken.
sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct
itself. If tsk != current and tsk is not a leader, this process can exit/exec
and task_lock(tsk->group_leader) may use the already freed task_struct.
Another problem is that sys_prlimit64() can race with mt-exec which changes
->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)
->group_leader may change between task_lock() and task_unlock().
Change sys_prlimit64() to take tasklist_lock when necessary. This is not
nice, but I don't see a better fix for -stable. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: fix module removal if firmware download failed
Fix remove if firmware failed to load:
qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2
qcom-iris aa00000.video-codec: firmware download failed
qcom-iris aa00000.video-codec: core init failed
then:
$ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind
Triggers:
genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
video_cc_mvs0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
video_cc_mvs0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
gcc_video_axi0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
------------[ cut here ]------------
gcc_video_axi0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
Skip deinit if initialization never succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
If fs_info->super_copy or fs_info->super_for_commit allocated failed in
btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info().
Otherwise btrfs_check_leaked_roots() would access NULL pointer because
fs_info->allocated_roots had not been initialised.
syzkaller reported the following information:
------------[ cut here ]------------
BUG: unable to handle page fault for address: fffffffffffffbb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...)
RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline]
RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline]
RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline]
RIP: 0010:refcount_read include/linux/refcount.h:170 [inline]
RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230
[...]
Call Trace:
<TASK>
btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280
btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029
btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097
vfs_get_tree+0x98/0x320 fs/super.c:1759
do_new_mount+0x357/0x660 fs/namespace.c:3899
path_mount+0x716/0x19c0 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount fs/namespace.c:4427 [inline]
__x64_sys_mount+0x28c/0x310 fs/namespace.c:4427
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f032eaffa8d
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
nios2: ensure that memblock.current_limit is set when setting pfn limits
On nios2, with CONFIG_FLATMEM set, the kernel relies on
memblock_get_current_limit() to determine the limits of mem_map, in
particular for max_low_pfn.
Unfortunately, memblock.current_limit is only default initialized to
MEMBLOCK_ALLOC_ANYWHERE at this point of the bootup, potentially leading
to situations where max_low_pfn can erroneously exceed the value of
max_pfn and, thus, the valid range of available DRAM.
This can in turn cause kernel-level paging failures, e.g.:
[ 76.900000] Unable to handle kernel paging request at virtual address 20303000
[ 76.900000] ea = c0080890, ra = c000462c, cause = 14
[ 76.900000] Kernel panic - not syncing: Oops
[ 76.900000] ---[ end Kernel panic - not syncing: Oops ]---
This patch fixes this by pre-calculating memblock.current_limit
based on the upper limits of the available memory ranges via
adjust_lowmem_bounds, a simplified version of the equivalent
implementation within the arm architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/notify: call exportfs_encode_fid with s_umount
Calling intotify_show_fdinfo() on fd watching an overlayfs inode, while
the overlayfs is being unmounted, can lead to dereferencing NULL ptr.
This issue was found by syzkaller.
Race Condition Diagram:
Thread 1 Thread 2
-------- --------
generic_shutdown_super()
shrink_dcache_for_umount
sb->s_root = NULL
|
| vfs_read()
| inotify_fdinfo()
| * inode get from mark *
| show_mark_fhandle(m, inode)
| exportfs_encode_fid(inode, ..)
| ovl_encode_fh(inode, ..)
| ovl_check_encode_origin(inode)
| * deref i_sb->s_root *
|
|
v
fsnotify_sb_delete(sb)
Which then leads to:
[ 32.133461] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 32.134438] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.135032] CPU: 1 UID: 0 PID: 4468 Comm: systemd-coredum Not tainted 6.17.0-rc6 #22 PREEMPT(none)
<snip registers, unreliable trace>
[ 32.143353] Call Trace:
[ 32.143732] ovl_encode_fh+0xd5/0x170
[ 32.144031] exportfs_encode_inode_fh+0x12f/0x300
[ 32.144425] show_mark_fhandle+0xbe/0x1f0
[ 32.145805] inotify_fdinfo+0x226/0x2d0
[ 32.146442] inotify_show_fdinfo+0x1c5/0x350
[ 32.147168] seq_show+0x530/0x6f0
[ 32.147449] seq_read_iter+0x503/0x12a0
[ 32.148419] seq_read+0x31f/0x410
[ 32.150714] vfs_read+0x1f0/0x9e0
[ 32.152297] ksys_read+0x125/0x240
IOW ovl_check_encode_origin derefs inode->i_sb->s_root, after it was set
to NULL in the unmount path.
Fix it by protecting calling exportfs_encode_fid() from
show_mark_fhandle() with s_umount lock.
This form of fix was suggested by Amir in [1].
[1]: https://lore.kernel.org/all/CAOQ4uxhbDwhb+2Brs1UdkoF0a3NSdBAOQPNfEHjahrgoKJpLEw@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc: fix uaf in proc_readdir_de()
Pde is erased from subdir rbtree through rb_erase(), but not set the node
to EMPTY, which may result in uaf access. We should use RB_CLEAR_NODE()
set the erased node to EMPTY, then pde_subdir_next() will return NULL to
avoid uaf access.
We found an uaf issue while using stress-ng testing, need to run testcase
getdent and tun in the same time. The steps of the issue is as follows:
1) use getdent to traverse dir /proc/pid/net/dev_snmp6/, and current
pde is tun3;
2) in the [time windows] unregister netdevice tun3 and tun2, and erase
them from rbtree. erase tun3 first, and then erase tun2. the
pde(tun2) will be released to slab;
3) continue to getdent process, then pde_subdir_next() will return
pde(tun2) which is released, it will case uaf access.
CPU 0 | CPU 1
-------------------------------------------------------------------------
traverse dir /proc/pid/net/dev_snmp6/ | unregister_netdevice(tun->dev) //tun3 tun2
sys_getdents64() |
iterate_dir() |
proc_readdir() |
proc_readdir_de() | snmp6_unregister_dev()
pde_get(de); | proc_remove()
read_unlock(&proc_subdir_lock); | remove_proc_subtree()
| write_lock(&proc_subdir_lock);
[time window] | rb_erase(&root->subdir_node, &parent->subdir);
| write_unlock(&proc_subdir_lock);
read_lock(&proc_subdir_lock); |
next = pde_subdir_next(de); |
pde_put(de); |
de = next; //UAF |
rbtree of dev_snmp6
|
pde(tun3)
/ \
NULL pde(tun2) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix received length check in big packets
Since commit 4959aebba8c0 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change. |
