| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix enumeration completion
The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.
The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.
Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: stm32-pwr: fix of_iomap leak
Smatch reports:
drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn:
'base' from of_iomap() not released on lines: 151,166.
In stm32_pwr_regulator_probe(), base is not released
when devm_kzalloc() fails to allocate memory or
devm_regulator_register() fails to register a new regulator device,
which may cause a leak.
To fix this issue, replace of_iomap() with
devm_platform_ioremap_resource(). devm_platform_ioremap_resource()
is a specialized function for platform devices.
It allows 'base' to be automatically released whether the probe
function succeeds or fails.
Besides, use IS_ERR(base) instead of !base
as the return value of devm_platform_ioremap_resource()
can either be a pointer to the remapped memory or
an ERR_PTR() encoded error code if the operation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: Protect reconfiguration of sb read-write from racing writes
The reconfigure / remount code takes a lot of effort to protect
filesystem's reconfiguration code from racing writes on remounting
read-only. However during remounting read-only filesystem to read-write
mode userspace writes can start immediately once we clear SB_RDONLY
flag. This is inconvenient for example for ext4 because we need to do
some writes to the filesystem (such as preparation of quota files)
before we can take userspace writes so we are clearing SB_RDONLY flag
before we are fully ready to accept userpace writes and syzbot has found
a way to exploit this [1]. Also as far as I'm reading the code
the filesystem remount code was protected from racing writes in the
legacy mount path by the mount's MNT_READONLY flag so this is relatively
new problem. It is actually fairly easy to protect remount read-write
from racing writes using sb->s_readonly_remount flag so let's just do
that instead of having to workaround these races in the filesystem code.
[1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/ |
| Django-Unicorn adds modern reactive component functionality to Django templates. Affected versions of Django-Unicorn are vulnerable to python class pollution vulnerability. The vulnerability arises from the core functionality `set_property_value`, which can be remotely triggered by users by crafting appropriate component requests and feeding in values of second and third parameter to the vulnerable function, leading to arbitrary changes to the python runtime status. With this finding at least five ways of vulnerability exploitation have been observed, stably resulting in Cross-Site Scripting (XSS), Denial of Service (DoS), and Authentication Bypass attacks in almost every Django-Unicorn-based application. This issue has been addressed in version 0.62.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix use after free bug in qedi_remove()
In qedi_probe() we call __qedi_probe() which initializes
&qedi->recovery_work with qedi_recovery_handler() and
&qedi->board_disable_work with qedi_board_disable_work().
When qedi_schedule_recovery_handler() is called, schedule_delayed_work()
will finally start the work.
In qedi_remove(), which is called to remove the driver, the following
sequence may be observed:
Fix this by finishing the work before cleanup in qedi_remove().
CPU0 CPU1
|qedi_recovery_handler
qedi_remove |
__qedi_remove |
iscsi_host_free |
scsi_host_put |
//free shost |
|iscsi_host_for_each_session
|//use qedi->shost
Cancel recovery_work and board_disable_work in __qedi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow
A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.
Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array. Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: dropping parent refcount after pd_free_fn() is done
Some cgroup policies will access parent pd through child pd even
after pd_offline_fn() is done. If pd_free_fn() for parent is called
before child, then UAF can be triggered. Hence it's better to guarantee
the order of pd_free_fn().
Currently refcount of parent blkg is dropped in __blkg_release(), which
is before pd_free_fn() is called in blkg_free_work_fn() while
blkg_free_work_fn() is called asynchronously.
This patch make sure pd_free_fn() called from removing cgroup is ordered
by delaying dropping parent refcount after calling pd_free_fn() for
child.
BTW, pd_free_fn() will also be called from blkcg_deactivate_policy()
from deleting device, and following patches will guarantee the order. |
| The All-in-One WP Migration and Backup plugin for WordPress is vulnerable to arbitrary PHP Code Injection due to missing file type validation during the export in all versions up to, and including, 7.86. This makes it possible for authenticated attackers, with Administrator-level access and above, to create an export file with the .php extension on the affected site's server, adding an arbitrary PHP code to it, which may make remote code execution possible. |
| A vulnerability was identified in Docker Desktop that allows local running Linux containers to access the Docker Engine API via the configured Docker subnet, at 192.168.65.7:2375 by default. This vulnerability occurs with or without Enhanced Container Isolation (ECI) enabled, and with or without the "Expose daemon on tcp://localhost:2375 without TLS" option enabled.
This can lead to execution of a wide range of privileged commands to the engine API, including controlling other containers, creating new ones, managing images etc. In some circumstances (e.g. Docker Desktop for Windows with WSL backend) it also allows mounting the host drive with the same privileges as the user running Docker Desktop. |
| STOMP over WebSocket applications may be vulnerable to a security bypass that allows an attacker to send unauthorized messages.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.11
* 6.1.0 - 6.1.23
* 6.0.x - 6.0.29
* 5.3.0 - 5.3.45
* Older, unsupported versions are also affected.
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.12OSS6.1.x6.1.24 Commercial https://enterprise.spring.io/ 6.0.xN/A Out of support https://spring.io/projects/spring-framework#support 5.3.x5.3.46 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CreditThis vulnerability was discovered and responsibly reported by Jannis Kaiser. |
| Deserialization of Untrusted Data vulnerability in CRM Perks Connector for Gravity Forms and Google Sheets wp-gravity-forms-spreadsheets allows Object Injection.This issue affects Connector for Gravity Forms and Google Sheets: from n/a through <= 1.2.6. |
| Tiny-Scientist is a lightweight framework for automating the entire lifecycle of scientific research—from ideation to implementation, writing, and review. In versions 0.1.1 and below, a critical path traversal vulnerability has been identified in the review_paper function in backend/app.py. The vulnerability allows malicious users to access arbitrary PDF files on the server by providing crafted file paths that bypass the intended security restrictions. This vulnerability allows attackers to: read any PDF file accessible to the server process, potentially access sensitive documents outside the intended directory and perform reconnaissance on the server's file system structure. This issue does not currently have a fix. |
| A flaw has been found in TOTVS Portal Meu RH up to 12.1.17. Impacted is an unknown function of the component Password Reset Handler. Executing manipulation of the argument redirectUrl can lead to open redirect. The attack may be performed from a remote location. The exploit has been published and may be used. Upgrading to version 12.1.2410.274, 12.1.2502.178 and 12.1.2506.121 is recommended to address this issue. It is recommended to upgrade the affected component. The vendor explains, that "[o]ur internal validation (...) confirms that the reported behavior does not exist in currently supported releases. In these tests, the redirectUrl parameter is ignored, and no malicious redirection occurs." This vulnerability only affects products that are no longer supported by the maintainer. |
| The Gift Cards (Gift Vouchers and Packages) (WooCommerce Supported) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 4.4.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. |
| A security issue exists due to the web-based debugger agent enabled on Rockwell Automation ControlLogix® Ethernet Modules. If a specific IP address is used to connect to the WDB agent, it can allow remote attackers to perform memory dumps, modify memory, and control execution flow. |
| Vega is a visualization grammar, a declarative format for creating, saving, and sharing interactive visualization designs. In Vega prior to version 6.2.0, applications meeting 2 conditions are at risk of arbitrary JavaScript code execution, even if "safe mode" expressionInterpreter is used. They are vulnerable if they use `vega` in an application that attaches `vega` library and a `vega.View` instance similar to the Vega Editor to the global `window` and if they allow user-defined Vega `JSON` definitions (vs JSON that was is only provided through source code). Patches are available in the following Vega applications. If using the latest Vega line (6.x), upgrade to `vega` `6.2.0` / `vega-expression` `6.1.0` / `vega-interpreter` `2.2.1` (if using AST evaluator mode). If using Vega in a non-ESM environment, upgrade to `vega-expression` `5.2.1` / `1.2.1` (if using AST evaluator mode). Some workarounds are available. Do not attach `vega` View instances to global variables, and do not attach `vega` to the global window. These practices of attaching the vega library and View instances may be convenient for debugging, but should not be used in production or in any situation where vega/vega-lite definitions could be provided by untrusted parties. |
| Deserialization of Untrusted Data vulnerability in designthemes VEDA veda allows Object Injection.This issue affects VEDA: from n/a through <= 4.2. |
| A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Ergosis Security Systems Computer Industry and Trade Inc. ZEUS PDKS allows SQL Injection.This issue affects ZEUS PDKS: from <1.0.5.10 through 10022026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| The BuddyPress Docs plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.2.3. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
