| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix panic due to wrong pageattr of im->image
In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.
At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:
insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c
bpftrace -e 'kretfunc:cmdline_proc_show {}'
BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bpf_trampoline_update+0x25a/0x6b0
__bpf_trampoline_link_prog+0x101/0x240
bpf_trampoline_link_prog+0x2d/0x50
bpf_tracing_prog_attach+0x24c/0x530
bpf_raw_tp_link_attach+0x73/0x1d0
__sys_bpf+0x100e/0x2570
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x5b/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw. |
| Xlight FTP Server <3.9.4.3 has an integer overflow vulnerability in the packet parsing logic of the SFTP server, which can lead to a heap overflow with attacker-controlled content. |
| A weakness has been identified in Intelbras UnniTI 24.07.11. The affected element is an unknown function of the file /xml/sistema/usuarios.xml. Executing manipulation of the argument Usuario/Senha can lead to unprotected storage of credentials. The attack can be executed remotely. The exploit has been made available to the public and could be exploited. |
| The Gravity Forms WordPress plugin before 2.9.23.1 does not properly prevent users from uploading dangerous files through its chunked upload functionality, allowing attackers to upload PHP files to affected sites and achieve Remote Code Execution, granted they can discover or enumerate the upload path. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.
However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.
When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().
Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up. However, we have
yet to get such a report, and only syzkaller stumbled on it. So, this
can be changed safely.
Note this does not change SOCK_SEQPACKET behaviour. |
| MariaDB mariadb-dump Utility Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of MariaDB. Interaction with the mariadb-dump utility is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the handling of view names. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27000. |
| Shields.io is a service for concise, consistent, and legible badges in SVG and raster format. Shields.io and users self-hosting their own instance of shields using version < `server-2024-09-25` are vulnerable to a remote execution vulnerability via the JSONPath library used by the Dynamic JSON/Toml/Yaml badges. This vulnerability would allow any user with access to make a request to a URL on the instance to the ability to execute code by crafting a malicious JSONPath expression. All users who self-host an instance are vulnerable. This problem was fixed in server-2024-09-25. Those who follow the tagged releases should update to `server-2024-09-25` or later. Those who follow the rolling tag on DockerHub, `docker pull shieldsio/shields:next` to update to the latest version. As a workaround, blocking access to the endpoints `/badge/dynamic/json`, `/badge/dynamic/toml`, and `/badge/dynamic/yaml` (e.g: via a firewall or reverse proxy in front of your instance) would prevent the exploitable endpoints from being accessed. |
| VIPRE Advanced Security Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of VIPRE Advanced Security for PC. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the product installer. The issue results from incorrect permissions on a folder. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-27147. |
| Improper initialization for some ESXi kernel mode driver for the Intel(R) Ethernet 800-Series before version 2.2.2.0 (esxi 8.0) & 2.2.3.0 (esxi 9.0) within Ring 1: Device Drivers may allow an information disclosure. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Firecrawl is a web scraper that allows users to extract the content of a webpage for a large language model. Versions prior to 1.1.1 contain a server-side request forgery (SSRF) vulnerability. The scraping engine could be exploited by crafting a malicious site that redirects to a local IP address. This allowed exfiltration of local network resources through the API. The cloud service was patched on December 27th, 2024, and the maintainers have checked that no user data was exposed by this vulnerability. Scraping engines used in the open sourced version of Firecrawl were patched on December 29th, 2024, except for the playwright services which the maintainers have determined to be un-patchable. All users of open-source software (OSS) Firecrawl should upgrade to v1.1.1. As a workaround, OSS Firecrawl users should supply the playwright services with a secure proxy. A proxy can be specified through the `PROXY_SERVER` env in the environment variables. Please refer to the documentation for instructions. Ensure that the proxy server one is using is setup to block all traffic going to link-local IP addresses. |
| Cursor is a code editor built for programming with AI. Prior to Sep 27, 2024, if a user generated a terminal command via Cursor's Terminal Cmd-K/Ctrl-K feature and if the user explicitly imported a malicious web page into the Terminal Cmd-K prompt, an attacker with control over the referenced web page could have a significant chance of influencing a language model to output arbitrary commands for execution in the user's terminal. This scenario would require the user explicitly opt-in to including the contents of a compromised webpage, and it would require that the attacker display prompt injection text in the the contents of the compromised webpage.
A server-side patch to not stream back newlines or control characters was released on September 27, 2024, within two hours of the issue being reported. Additionally, Cursor 0.42 includes client-side mitigations to prevent any newline or control character from being streamed into the terminal directly. It also contains a new setting, `"cursor.terminal.usePreviewBox"`, which, if set to true, streams the response into a preview box whose contents then have to be manually accepted before being inserted into the terminal. This setting is useful if you're working in a shell environment where commands can be executed without pressing enter or any control character. The patch has been applied server-side, so no additional action is needed, even on older versions of Cursor. Separately, Cursor's maintainers also recommend, as best practice, to only include trusted pieces of context in prompts. |
| Improper input validation for some Server Firmware Update Utility(SysFwUpdt) before version 16.0.12 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A vulnerability, which was classified as problematic, has been found in Enpass Password Manager up to 6.9.5 on Windows. This issue affects some unknown processing. The manipulation leads to cleartext storage of sensitive information in memory. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. Upgrading to version 6.10.1 is able to address this issue. It is recommended to upgrade the affected component. |
| SAP NetWeaver Application Server ABAP allows malicious scripts to be executed in the application, potentially leading to a Cross-Site Scripting (XSS) vulnerability. This has no impact on the availability of the application, but it can have some minor impact on its confidentiality and integrity. |
| A vulnerability was found in 07FLYCMS, 07FLY-CMS and 07FlyCRM up to 20250831. This issue affects some unknown processing of the file /index.php/Login/login. Performing manipulation of the argument Username results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. This product is published under multiple names. The vendor was contacted early about this disclosure but did not respond in any way. |
| The wp-greet plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 6.2. This is due to missing or incorrect nonce validation on a function. This makes it possible for unauthenticated attackers to update settings and inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| An HTML injection vulnerability in Amidaware Inc Tactical RMM v1.3.1 and earlier allows authenticated users to inject arbitrary HTML content during the creation of a new agent via the POST /api/v3/newagent/ endpoint. The agent_id parameter accepts up to 255 characters and is improperly sanitized using DOMPurify.sanitize() with the html: true option enabled, which fails to adequately filter HTML input. The injected HTML is rendered in the Tactical RMM management panel when an administrator attempts to remove or shut down the affected agent, potentially leading to client-side attacks such as UI manipulation or phishing. NOTE: the Supplier's position is that this has incorrect information. |
| A security flaw has been discovered in Mangati NovoSGA up to 2.2.9. The impacted element is an unknown function of the file /admin of the component SVG File Handler. Performing manipulation of the argument logoNavbar/logoLogin results in cross site scripting. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. |
| Privilege chaining issue exists in the installer of e-Tax software(common program). If this vulnerability is exploited, a malicious DLL prepared by an attacker may be executed with higher privileges than the application privilege. |
