| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel. |
| A vulnerability was detected in Kilo Code up to 4.86.0. Affected is the function ClineProvider of the file src/core/webview/ClineProvider.ts of the component Prompt Handler. Performing manipulation results in injection. The attack can be initiated remotely. The exploit is now public and may be used. Applying a patch is the recommended action to fix this issue. |
| Cross-Site WebSocket Hijacking vulnerability in Hitachi Ops Center Analyzer (RAID Agent component).This issue affects Hitachi Ops Center Analyzer: from 10.8.0-00 before 11.0.4-00; Hitachi Ops Center Analyzer: from 10.9.0-00 before 11.0.4-00. |
| A vulnerability has been identified in Mendix LDAP (All versions < V1.1.2). Affected versions of the module are vulnerable to LDAP injection. This could allow an unauthenticated remote attacker to bypass username verification. |
| Statmatic is a Laravel and Git powered content management system (CMS). Stored XSS vulnerabilities in Collections and Taxonomies allow authenticated users with content creation permissions to inject malicious JavaScript that executes when viewed by higher-privileged users. This vulnerability is fixed in 5.22.1. |
| Improper limitation of a pathname to a restricted directory ('Path Traversal') issue exists in FitNesse releases prior to 20241026. If this vulnerability is exploited, an attacker may be able to know whether a file exists at a specific path, and/or obtain some part of the file contents under specific conditions. |
| The Net::EasyTCP package 0.15 through 0.26 for Perl uses Perl's builtin rand() if no strong randomization module is present. |
| Integer Overflow or Wraparound, Improper Validation of Specified Quantity in Input vulnerability in RestApp Inc. Online Ordering System allows Integer Attacks.
This issue affects Online Ordering System: 8.2.1.
NOTE: Vulnerability fixed in version 8.2.2 and does not exist before 8.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| Public Knowledge Project pkp-lib 3.4.0-7 and earlier is vulnerable to Open redirect due to a lack of input sanitization in the logout function. |
| A flaw was found in Keycloak. By setting a verification policy to 'ALL', the trust store certificate verification is skipped, which is unintended. |
| Adept is a language for general purpose programming. Prior to commit a1a41b7, the remoteBuild.yml workflow file uses actions/upload-artifact@v4 to upload the mac-standalone artifact. This artifact is a zip of the current directory, which includes the automatically generated .git/config file containing the run's GITHUB_TOKEN. Seeing as the artifact can be downloaded prior to the end of the workflow, there is a few seconds where an attacker can extract the token from the artifact and use it with the Github API to push malicious code or rewrite release commits in the AdeptLanguage/Adept repository. This issue has been patched in commit a1a41b7. |
| Simofa is a tool to help automate static website building and deployment. Prior to version 0.2.7, due to a design mistake in the RouteLoader class, some API routes may be publicly accessible when they should require authentication. This vulnerability has been patched in v0.2.7. |
| The Featured Image Generator plugin for WordPress is vulnerable to unauthorized image upload due to a missing capability check on the fig_save_after_generate_image function in all versions up to, and including, 1.3.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary images to a post-related gallery. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: fix use-after-free caused by uec->work
The delayed work uec->work is scheduled in gaokun_ucsi_probe()
but never properly canceled in gaokun_ucsi_remove(). This creates
use-after-free scenarios where the ucsi and gaokun_ucsi structure
are freed after ucsi_destroy() completes execution, while the
gaokun_ucsi_register_worker() might be either currently executing
or still pending in the work queue. The already-freed gaokun_ucsi
or ucsi structure may then be accessed.
Furthermore, the race window is 3 seconds, which is sufficiently
long to make this bug easily reproducible. The following is the
trace captured by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630
Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0
...
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x114/0x580
kasan_report+0xa4/0xf0
__asan_report_store8_noabort+0x20/0x2c
__run_timers+0x5ec/0x630
run_timer_softirq+0xe8/0x1cc
handle_softirqs+0x294/0x720
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x30/0x48
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x27c/0x364
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x40/0x60
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
arch_local_irq_enable+0x4/0x8 (P)
do_idle+0x334/0x458
cpu_startup_entry+0x60/0x70
rest_init+0x158/0x174
start_kernel+0x2f8/0x394
__primary_switched+0x8c/0x94
Allocated by task 72 on cpu 0 at 27.510341s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
kasan_save_alloc_info+0x40/0x54
__kasan_kmalloc+0xa0/0xb8
__kmalloc_node_track_caller_noprof+0x1c0/0x588
devm_kmalloc+0x7c/0x1c8
gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8
really_probe+0x17c/0x5b8
__driver_probe_device+0x158/0x2c4
driver_probe_device+0x10c/0x264
__device_attach_driver+0x168/0x2d0
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x368
device_initial_probe+0x14/0x20
bus_probe_device+0x120/0x150
device_add+0xb3c/0x10fc
__auxiliary_device_add+0x88/0x130
...
Freed by task 73 on cpu 1 at 28.910627s:
kasan_save_stack+0x2c/0x54
kasan_save_track+0x24/0x5c
__kasan_save_free_info+0x4c/0x74
__kasan_slab_free+0x60/0x8c
kfree+0xd4/0x410
devres_release_all+0x140/0x1f0
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x344/0x460
device_release_driver+0x18/0x24
bus_remove_device+0x198/0x274
device_del+0x310/0xa84
...
The buggy address belongs to the object at ffff00000ec28c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 200 bytes inside of
freed 512-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff)
page_type: f5(slab)
raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
================================================================
---truncated--- |
| OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. From 5.0.0 to 6.10.1, OpenC3 COSMOS contains a critical remote code execution vulnerability reachable through the JSON-RPC API. When a JSON-RPC request uses the string form of certain APIs, attacker-controlled parameter text is parsed into values using String#convert_to_value. For array-like inputs, convert_to_value executes eval(). Because the cmd code path parses the command string before calling authorize(), an unauthenticated attacker can trigger Ruby code execution even though the request ultimately fails authorization (401). This vulnerability is fixed in 6.10.2. |
| OpenSearch Dashboards Security Plugin adds a configuration management UI for the OpenSearch Security features to OpenSearch Dashboards. Improper validation of the nextUrl parameter can lead to external redirect on login to OpenSearch-Dashboards for specially crafted parameters. A patch is available in 1.3.19 and 2.16.0 for this issue. |
| The Paradox IP150 Internet Module in version 1.40.00 is vulnerable to Cross-Site Request Forgery (CSRF) attacks due to a lack of countermeasures and the use of the HTTP method `GET` to introduce changes in the system. |
| The rtMedia for WordPress, BuddyPress and bbPress plugin for WordPress is vulnerable to to Information Disclosure due to missing authorization in the handle_rest_pre_dispatch() function when the Godam plugin is active, in versions 4.7.0 to 4.7.3. This makes it possible for unauthenticated attackers to retrieve media items associated with draft or private posts. |
| Multiple plugins for WordPress are vulnerable to Stored Cross-Site Scripting via the plugin's bundled Featherlight.js JavaScript library (versions 1.7.13 to 1.7.14) in various versions due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
