| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| On affected versions of the CloudVision Portal, improper access controls could enable a malicious authenticated user to take broader actions on managed EOS devices than intended. This advisory impacts the Arista CloudVision Portal products when run on-premise. It does not impact CloudVision as-a-Service. |
| Certain ASUS router models have authentication bypass vulnerability, allowing unauthenticated remote attackers to log in the device. |
| A vulnerability in Okta Verify for iOS versions 9.25.1 (beta) and 9.27.0 (including beta) allows push notification responses through the iOS ContextExtension feature allowing the authentication to proceed regardless of the user’s selection. When a user long-presses the notification banner and selects an option, both options allow the authentication to succeed.
The ContextExtension feature is one of several push mechanisms available when using Okta Verify Push on iOS devices. The vulnerable flows include:
* When a user is presented with a notification on a locked screen, the user presses on the notification directly and selects their reply without unlocking the device;
* When a user is presented with a notification on the home screen and drags the notification down and selects their reply;
* When an Apple Watch is used to reply directly to a notification.
A pre-condition for this vulnerability is that the user must have enrolled in Okta Verify while the Okta customer was using Okta Classic. This applies irrespective of whether the organization has since upgraded to Okta Identity Engine. |
| scratch-coding-hut.github.io is the website for Coding Hut. In 1.0-beta3 and earlier, the login link can be used to login to any account by changing the username in the username field. |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| Pocketbase is an open source web backend written in go. In affected versions a malicious user may be able to compromise other user accounts. In order to be exploited users must have both OAuth2 and Password auth methods enabled. A possible attack scenario could be: 1. a malicious actor register with the targeted user's email (it is unverified), 2. at some later point in time the targeted user stumble on your app and decides to sign-up with OAuth2 (_this step could be also initiated by the attacker by sending an invite email to the targeted user_), 3. on successful OAuth2 auth we search for an existing PocketBase user matching with the OAuth2 user's email and associate them, 4. because we haven't changed the password of the existing PocketBase user during the linking, the malicious actor has access to the targeted user account and will be able to login with the initially created email/password. To prevent this for happening we now reset the password for this specific case if the previously created user wasn't verified (an exception to this is if the linking is explicit/manual, aka. when you send `Authorization:TOKEN` with the OAuth2 auth call). Additionally to warn existing users we now send an email alert in case the user has logged in with password but has at least one OAuth2 account linked. The flow will be further improved with ongoing refactoring and we will start sending emails for "unrecognized device" logins (OTP and MFA is already implemented and will be available with the next v0.23.0 release in the near future). For the time being users are advised to update to version 0.22.14. There are no known workarounds for this vulnerability.
|
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems.
* vulnerabilities:
*
Improper Neutralization of Special Elements used in a Command ('Command Injection')
* Use of Hard-coded Credentials
* Improper Authentication
* Binding to an Unrestricted IP Address
The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. |
| Nix is a package manager for Linux and other Unix systems. Starting in version 1.11 and prior to versions 2.18.8 and 2.24.8, `<nix/fetchurl.nix>` did not verify TLS certificates on HTTPS connections. This could lead to connection details such as full URLs or credentials leaking in case of a man-in-the-middle (MITM) attack. `<nix/fetchurl.nix>` is also known as the builtin derivation builder `builtin:fetchurl`. It's not to be confused with the evaluation-time function `builtins.fetchurl`, which was not affected by this issue. A user may be affected by the risk of leaking credentials if they have a `netrc` file for authentication, or rely on derivations with `impureEnvVars` set to use credentials from the environment. In addition, the commonplace trust-on-first-use (TOFU) technique of updating dependencies by specifying an invalid hash and obtaining it from a remote store was also vulnerable to a MITM injecting arbitrary store objects. This also applied to the impure derivations experimental feature. Note that this may also happen when using Nixpkgs fetchers to obtain new hashes when not using the fake hash method, although that mechanism is not implemented in Nix itself but rather in Nixpkgs using a fixed-output derivation. The behavior was introduced in version 1.11 to make it consistent with the Nixpkgs `pkgs.fetchurl` and to make `<nix/fetchurl.nix>` work in the derivation builder sandbox, which back then did not have access to the CA bundles by default. Nowadays, CA bundles are bind-mounted on Linux. This issue has been fixed in Nix 2.18.8 and 2.24.8. As a workaround, implement (authenticated) fetching with `pkgs.fetchurl` from Nixpkgs, using `impureEnvVars` and `curlOpts` as needed. |
| Improper authentication vulnerability in Novakon P series allows unauthenticated attackers to upload and download any application from/to the device.This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build
2026.02.06 (commit d0f97fd9). |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| A vulnerability, which was classified as critical, has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308. Affected by this issue is some unknown functionality of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| Anyquery is an SQL query engine built on top of SQLite. Versions 0.4.3 and below allow attackers who have already gained access to localhost, even with low privileges, to use the http server through the port unauthenticated, and access private integration data like emails, without any warning of a foreign login from the provider. This issue is fixed in version 0.4.4. |
| Captive Portal can allow authentication bypass |
| Chef InSpec versions up to 5.23 and before 7.0.107 creates named pipes with overly permissive default Windows access controls. A local attacker may interfere with the pipe connection process and exploit the insufficient access restrictions to assume the InSpec execution context, potentially resulting in elevated privileges or operational disruption.
This issue affects Chef Inspec: through 5.23 and before 7.0.107 |
| FACTION is a PenTesting Report Generation and Collaboration Framework. Authentication is bypassed when an attacker registers a new user with admin privileges. This is possible at any time without any authorization. The request must follow the validation rules (no missing information, secure password, etc) but there are no other controls stopping them. This vulnerability is fixed in 1.4.3. |
| Insufficient validation of the screen lock mechanism in Trust Wallet v8.45 allows physically proximate attackers to bypass the lock screen and view the wallet balance. |
| Northern.tech Mender Enterprise before 3.6.4 and 3.7.x before 3.7.4 has Weak Authentication. |
| Hikka, a Telegram userbot, has vulnerability affects all users on all versions of Hikka. Two scenarios are possible. 1. Web interface does not have an authenticated session: attacker can use his own Telegram account to gain RCE to the server by authorizing in the dangling web interface. 2. Web interface does have an authenticated session: due to insufficient warning in the authentication message, users were tempted to click "Allow" in the "Allow web application ops" menu. This gave an attacker access not only to remote code execution, but also to Telegram accounts of owners. Scenario number 2 is known to have been exploited in the wild. No known patches are available, but some workarounds are available. Use `--no-web` flag and do not start userbot without it; after authorizing in the web interface, close the port on the server and/or start the userbot with `--no-web` flag; and do not click "Allow" in your helper bot unless it is your explicit action that needs to be allowed. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| SFTPGo is a full-featured and highly configurable SFTP, HTTP/S, FTP/S and WebDAV server - S3, Google Cloud Storage, Azure Blob. SFTPGo WebAdmin and WebClient support password reset. This feature is disabled in the default configuration.
In SFTPGo versions prior to v2.6.1, if the feature is enabled, even users with access restrictions (e.g. expired) can reset their password and log in. Users are advised to upgrade to version 2.6.1. Users unable to upgrade may keep the password reset feature disabled or set a blank email address for users and admins with access restrictions so they cannot receive the email with the reset code and exploit the vulnerability. |
