| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected
It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(),
as below, it will not print when debug_mask is not set ATH11K_DBG_DATA.
ath11k_dbg(ab, ATH11K_DBG_DATA,
"failed to find the peer with peer_id %d\n",
ppdu_info.peer_id);
When run scan with station disconnected, the peer_id is 0 for case
HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called
from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is
reset to 0 in the while loop, so it does not match condition of the
check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and
then the log "failed to find the peer with peer_id 0" print after the
check in the loop, it is below call stack when debug_mask is set
ATH11K_DBG_DATA.
The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv")
add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in
ath11k_dp_rx_process_mon_status(), but the commit does not initialize
the peer_id to HAL_INVALID_PEERID, then lead the check mis-match.
Callstack of the failed log:
[12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k]
[12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd
[12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246
[12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000
[12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18
[12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000
[12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40
[12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000
[12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000
[12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0
[12335.689360] Call Trace:
[12335.689377] <IRQ>
[12335.689418] ? rcu_read_lock_held_common+0x12/0x50
[12335.689447] ? rcu_read_lock_sched_held+0x25/0x80
[12335.689471] ? rcu_read_lock_held_common+0x12/0x50
[12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k]
[12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k]
[12335.689653] ? lock_acquire+0xef/0x360
[12335.689681] ? rcu_read_lock_sched_held+0x25/0x80
[12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k]
[12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k]
[12335.689860] call_timer_fn+0xb2/0x2f0
[12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k]
[12335.689970] run_timer_softirq+0x21f/0x540
[12335.689999] ? ktime_get+0xad/0x160
[12335.690025] ? lapic_next_deadline+0x2c/0x40
[12335.690053] ? clockevents_program_event+0x82/0x100
[12335.690093] __do_softirq+0x151/0x4a8
[12335.690135] irq_exit_rcu+0xc9/0x100
[12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0
[12335.690189] </IRQ>
[12335.690204] <TASK>
[12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20
Reset the default value to HAL_INVALID_PEERID each time after memset
of ppdu_info as well as others memset which existed in function
ath11k_dp_rx_process_mon_status(), then the failed log disappeared.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V5.40), SICORE Base system (All versions < V1.4.0). Affected devices allow a remote authenticated user or an unauthenticated user with physical access to downgrade the firmware of the device. This could allow an attacker to downgrade the device to older versions with known vulnerabilities. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub and other standards. At present, when Fedify needs to retrieve an object or activity from a remote activitypub server, it makes a HTTP request to the `@id` or other resources present within the activity it has received from the web. This activity could reference an `@id` that points to an internal IP address, allowing an attacker to send request to resources internal to the fedify server's network. This applies to not just resolution of documents containing activities or objects, but also to media URLs as well. Specifically this is a Server Side Request Forgery attack. Users should upgrade to Fedify version 0.9.2, 0.10.1, or 0.11.1 to receive a patch for this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
Prior to commit 69e3b846d8a7 ("arm64: mte: Sync tags for pages where PTE
is untagged"), mte_sync_tags() was only called for pte_tagged() entries
(those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use
test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently
setting PG_mte_tagged on an untagged page.
The above commit was required as guests may enable MTE without any
control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM.
However, the side-effect was that any page with a PTE that looked like
swap (or migration) was getting PG_mte_tagged set automatically. A
subsequent page copy (e.g. migration) copied the tags to the destination
page even if the tags were owned by KASAN.
This issue was masked by the page_kasan_tag_reset() call introduced in
commit e5b8d9218951 ("arm64: mte: reset the page tag in page->flags").
When this commit was reverted (20794545c146), KASAN started reporting
access faults because the overriding tags in a page did not match the
original page->flags (with CONFIG_KASAN_HW_TAGS=y):
BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26
Read at addr f5ff000017f2e000 by task syz-executor.1/2218
Pointer tag: [f5], memory tag: [f2]
Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual
place where tags are cleared (mte_sync_page_tags()) or restored
(mte_restore_tags()). |
| Hitachi Vantara Pentaho Data Integration and Analytics Community Dashboard Framework prior to versions 10.2.0.4, including 9.3.0.x and 8.3.x display the full server stack trace when encountering an error within the GetCdfResource servlet. |
| aSc TimeTables 2020.11.4 contains a denial of service vulnerability that allows attackers to crash the application by overwriting the Subject title field with a large buffer. Attackers can generate a 1000-character buffer and paste it into the Subject title to trigger an application crash and potential instability. |
| Authorization Bypass Through User-Controlled Key vulnerability in SecHard Information Technologies SecHard allows Forceful Browsing.This issue affects SecHard: before 3.6.2-20250805. |
| The Timetics- AI-powered Appointment Booking with Visual Seat Plan and ultimate Calendar Scheduling plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the make_staff() function in all versions up to, and including, 1.0.21. This makes it possible for unauthenticated attackers to grant users staff permissions. CVE-2024-37427 is likely a duplicate of this issue. |
| Zemana AntiLogger v2.74.204.664 is vulnerable to an Arbitrary Process Termination vulnerability by triggering the 0x80002048 IOCTL code of the zam64.sys and zamguard64.sys drivers.
|
| The Clone plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 2.4.6 via deserialization of untrusted input in the 'recursive_unserialized_replace' function. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. |
| The WP Foodbakery plugin for WordPress is vulnerable to arbitrary file uploads due to insufficient file type validation in the 'upload_publisher_profile_image' function in versions up to, and including, 4.7. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| Improper Verification of Source of a Communication Channel in Work Desktop for Mac versions 10.8.1.46 and earlier
allows attackers to execute arbitrary commands via unauthorized access to the Agent service.
This has been remediated in Work Desktop for Mac version 10.8.2.33. |
| Incorrect Privilege Assignment vulnerability in Progress Planner Progress Planner progress-planner allows Privilege Escalation.This issue affects Progress Planner: from n/a through <= 1.8.0. |
| A vulnerability was identified in Acrel Environmental Monitoring Cloud Platform up to 20250804. This affects an unknown part of the file /NewsManage/UploadNewsImg. The manipulation of the argument File leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in BSS Software Mobuy Online Machinery Monitoring Panel allows SQL Injection.This issue affects Mobuy Online Machinery Monitoring Panel: before 2.0. |
| The Exclusive Divi – Divi Preloader, Modules for Divi & Extra Theme plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. |
| The W3 Total Cache WordPress plugin before 2.8.13 is vulnerable to command injection via the _parse_dynamic_mfunc function, allowing unauthenticated users to execute PHP commands by submitting a comment with a malicious payload to a post. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere (CWE-497) in the Gallagher Morpho integration could allow an authenticated operator with limited site permissions to make critical changes to local Morpho devices.
This issue affects Command Centre Server:
9.30 prior to vEL9.30.2482 (MR2), 9.20 prior to vEL9.20.2819 (MR4), 9.10 prior to vEL9.10.3672 (MR7), 9.00 prior to vEL9.00.3831 (MR8), all versions of 8.90 and prior. |
| A vulnerability has been identified in which unauthenticated cross-site
scripting (XSS) in Norman's public API endpoint can be exploited. This
can lead to an attacker exploiting the vulnerability to trigger
JavaScript code and execute commands remotely. |
| Unrestricted Upload of File with Dangerous Type, Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in django CMS Association django Filer allows Input Data Manipulation, Stored XSS.This issue affects django Filer: from 3 before 3.3. |
