| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An access control vulnerability was discovered in the Threat Intelligence functionality due to a specific access restriction not being properly enforced for users with view-only privileges. An authenticated user with view-only privileges for the Threat Intelligence functionality can perform administrative actions on it, altering the rules configuration, and/or affecting their availability. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent use-after-free during requeue-PI
syzbot managed to trigger the following race:
T1 T2
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue()
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
requeue_pi_wake_futex()
futex_requeue_pi_complete()
/* preempt */
* timeout/ signal wakes T1 *
futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED
futex_hash_put()
// back to userland, on stack futex_q is garbage
/* back */
wake_up_state(q->task, TASK_NORMAL);
In this scenario futex_wait_requeue_pi() is able to leave without using
futex_q::lock_ptr for synchronization.
This can be prevented by reading futex_q::task before updating the
futex_q::requeue_state. A reference on the task_struct is not needed
because requeue_pi_wake_futex() is invoked with a spinlock_t held which
implies a RCU read section.
Even if T1 terminates immediately after, the task_struct will remain valid
during T2's wake_up_state(). A READ_ONCE on futex_q::task before
futex_requeue_pi_complete() is enough because it ensures that the variable
is read before the state is updated.
Read futex_q::task before updating the requeue state, use it for the
following wakeup. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: writeback: fix use-after-free in __mark_inode_dirty()
An use-after-free issue occurred when __mark_inode_dirty() get the
bdi_writeback that was in the progress of switching.
CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1
......
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mark_inode_dirty+0x124/0x418
lr : __mark_inode_dirty+0x118/0x418
sp : ffffffc08c9dbbc0
........
Call trace:
__mark_inode_dirty+0x124/0x418
generic_update_time+0x4c/0x60
file_modified+0xcc/0xd0
ext4_buffered_write_iter+0x58/0x124
ext4_file_write_iter+0x54/0x704
vfs_write+0x1c0/0x308
ksys_write+0x74/0x10c
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xe4
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x194/0x198
Root cause is:
systemd-random-seed kworker
----------------------------------------------------------------------
___mark_inode_dirty inode_switch_wbs_work_fn
spin_lock(&inode->i_lock);
inode_attach_wb
locked_inode_to_wb_and_lock_list
get inode->i_wb
spin_unlock(&inode->i_lock);
spin_lock(&wb->list_lock)
spin_lock(&inode->i_lock)
inode_io_list_move_locked
spin_unlock(&wb->list_lock)
spin_unlock(&inode->i_lock)
spin_lock(&old_wb->list_lock)
inode_do_switch_wbs
spin_lock(&inode->i_lock)
inode->i_wb = new_wb
spin_unlock(&inode->i_lock)
spin_unlock(&old_wb->list_lock)
wb_put_many(old_wb, nr_switched)
cgwb_release
old wb released
wb_wakeup_delayed() accesses wb,
then trigger the use-after-free
issue
Fix this race condition by holding inode spinlock until
wb_wakeup_delayed() finished. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: fix use-after-free in cmp_bss()
Following bss_free() quirk introduced in commit 776b3580178f
("cfg80211: track hidden SSID networks properly"), adjust
cfg80211_update_known_bss() to free the last beacon frame
elements only if they're not shared via the corresponding
'hidden_beacon_bss' pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()
syzbot reported the splat below without a repro.
In the splat, a single thread calling bt_accept_dequeue() freed sk
and touched it after that.
The root cause would be the racy l2cap_sock_cleanup_listen() call
added by the cited commit.
bt_accept_dequeue() is called under lock_sock() except for
l2cap_sock_release().
Two threads could see the same socket during the list iteration
in bt_accept_dequeue():
CPU1 CPU2 (close())
---- ----
sock_hold(sk) sock_hold(sk);
lock_sock(sk) <-- block close()
sock_put(sk)
bt_accept_unlink(sk)
sock_put(sk) <-- refcnt by bt_accept_enqueue()
release_sock(sk)
lock_sock(sk)
sock_put(sk)
bt_accept_unlink(sk)
sock_put(sk) <-- last refcnt
bt_accept_unlink(sk) <-- UAF
Depending on the timing, the other thread could show up in the
"Freed by task" part.
Let's call l2cap_sock_cleanup_listen() under lock_sock() in
l2cap_sock_release().
[0]:
BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]
BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115
Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995
CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]
do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115
spin_lock_bh include/linux/spinlock.h:356 [inline]
release_sock+0x21/0x220 net/core/sock.c:3746
bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312
l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451
l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x3ff/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2accf8ebe9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f
R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c
R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490
</TASK>
Allocated by task 5326:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4365 [inline]
__kmalloc_nopro
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix potential invalid access when MAC list is empty
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would
lead to memory corruption so add some bounds checking. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix buffer free/clear order in deferred receive path
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix OOB read/write in network-coding decode
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: do not propagate ENODATA disk errors into xattr code
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.) |
| In the Linux kernel, the following vulnerability has been resolved:
atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().
syzbot reported the splat below. [0]
When atmtcp_v_open() or atmtcp_v_close() is called via connect()
or close(), atmtcp_send_control() is called to send an in-kernel
special message.
The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length.
Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc.
The notable thing is struct atmtcp_control is uAPI but has a
space for an in-kernel pointer.
struct atmtcp_control {
struct atmtcp_hdr hdr; /* must be first */
...
atm_kptr_t vcc; /* both directions */
...
} __ATM_API_ALIGN;
typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
The special message is processed in atmtcp_recv_control() called
from atmtcp_c_send().
atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths:
1. .ndo_start_xmit() (vcc->send() == atm_send_aal0())
2. vcc_sendmsg()
The problem is sendmsg() does not validate the message length and
userspace can abuse atmtcp_recv_control() to overwrite any kptr
by atmtcp_control.
Let's add a new ->pre_send() hook to validate messages from sendmsg().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI
KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f]
CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline]
RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297
Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c
RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203
RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c
RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd
R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000
R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff
FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0
Call Trace:
<TASK>
vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
____sys_sendmsg+0x505/0x830 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f8d7e96a4a9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9
RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005
RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f
R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac
R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: convert 'use' field to refcount_t
The 'use' field in struct rose_neigh is used as a reference counter but
lacks atomicity. This can lead to race conditions where a rose_neigh
structure is freed while still being referenced by other code paths.
For example, when rose_neigh->use becomes zero during an ioctl operation
via rose_rt_ioctl(), the structure may be removed while its timer is
still active, potentially causing use-after-free issues.
This patch changes the type of 'use' from unsigned short to refcount_t and
updates all code paths to use rose_neigh_hold() and rose_neigh_put() which
operate reference counts atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: fix UAF via HID_CLAIMED_INPUT validation
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
0x05, 0x0D, // Usage Page (Digitizer)
0x09, 0x05, // Usage (Touch Pad)
0xA1, 0x01, // Collection (Application)
0x85, 0x0D, // Report ID (13)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0xC5, // Usage (0xC5)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0xB1, 0x02, // Feature (Data,Var,Abs)
0x85, 0x5D, // Report ID (93)
0x06, 0x00, 0x00, // Usage Page (Undefined)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x1B, // Report Count (27)
0x81, 0x02, // Input (Data,Var,Abs)
0xC0, // End Collection
Below is the KASAN splat after triggering the UAF:
[ 21.672709] ==================================================================
[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80
[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54
[ 21.673700]
[ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)
[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 21.673700] Call Trace:
[ 21.673700] <TASK>
[ 21.673700] dump_stack_lvl+0x5f/0x80
[ 21.673700] print_report+0xd1/0x660
[ 21.673700] kasan_report+0xe5/0x120
[ 21.673700] __asan_report_store8_noabort+0x1b/0x30
[ 21.673700] asus_probe+0xeeb/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Allocated by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_alloc_info+0x3b/0x50
[ 21.673700] __kasan_kmalloc+0x9c/0xa0
[ 21.673700] __kmalloc_cache_noprof+0x139/0x340
[ 21.673700] input_allocate_device+0x44/0x370
[ 21.673700] hidinput_connect+0xcb6/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Freed by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_free_info+0x3f/0x60
[ 21.673700] __kasan_slab_free+0x3c/0x50
[ 21.673700] kfre
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: use array_index_nospec with indices that come from guest
min and dest_id are guest-controlled indices. Using array_index_nospec()
after the bounds checks clamps these values to mitigate speculative execution
side-channels. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Detect events pointing to unexpected TREs
When a remote device sends a completion event to the host, it contains a
pointer to the consumed TRE. The host uses this pointer to process all of
the TREs between it and the host's local copy of the ring's read pointer.
This works when processing completion for chained transactions, but can
lead to nasty results if the device sends an event for a single-element
transaction with a read pointer that is multiple elements ahead of the
host's read pointer.
For instance, if the host accesses an event ring while the device is
updating it, the pointer inside of the event might still point to an old
TRE. If the host uses the channel's xfer_cb() to directly free the buffer
pointed to by the TRE, the buffer will be double-freed.
This behavior was observed on an ep that used upstream EP stack without
'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer
is written")'. Where the device updated the events ring pointer before
updating the event contents, so it left a window where the host was able to
access the stale data the event pointed to, before the device had the
chance to update them. The usual pattern was that the host received an
event pointing to a TRE that is not immediately after the last processed
one, so it got treated as if it was a chained transaction, processing all
of the TREs in between the two read pointers.
This commit aims to harden the host by ensuring transactions where the
event points to a TRE that isn't local_rp + 1 are chained.
[mani: added stable tag and reworded commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE
On Google gs101, the number of UTP transfer request slots (nutrs) is 32,
and in this case the driver ends up programming the UTRL_NEXUS_TYPE
incorrectly as 0.
This is because the left hand side of the shift is 1, which is of type
int, i.e. 31 bits wide. Shifting by more than that width results in
undefined behaviour.
Fix this by switching to the BIT() macro, which applies correct type
casting as required. This ensures the correct value is written to
UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift
warning:
UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21
shift exponent 32 is too large for 32-bit type 'int'
For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE
write. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Fix configfs group list head handling
Doing a list_del() on the epf_group field of struct pci_epf_driver in
pci_epf_remove_cfs() is not correct as this field is a list head, not
a list entry. This list_del() call triggers a KASAN warning when an
endpoint function driver which has a configfs attribute group is torn
down:
==================================================================
BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198
Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319
CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE
Hardware name: Radxa ROCK 5B (DT)
Call trace:
show_stack+0x2c/0x84 (C)
dump_stack_lvl+0x70/0x98
print_report+0x17c/0x538
kasan_report+0xb8/0x190
__asan_report_store8_noabort+0x20/0x2c
pci_epf_remove_cfs+0x17c/0x198
pci_epf_unregister_driver+0x18/0x30
nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf]
__arm64_sys_delete_module+0x264/0x424
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xac/0x230
do_el0_svc+0x40/0x58
el0_svc+0x48/0xdc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
...
Remove this incorrect list_del() call from pci_epf_remove_cfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/debug_vm_pgtable: clear page table entries at destroy_args()
The mm/debug_vm_pagetable test allocates manually page table entries for
the tests it runs, using also its manually allocated mm_struct. That in
itself is ok, but when it exits, at destroy_args() it fails to clear those
entries with the *_clear functions.
The problem is that leaves stale entries. If another process allocates an
mm_struct with a pgd at the same address, it may end up running into the
stale entry. This is happening in practice on a debug kernel with
CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra
debugging I added (it prints a warning trace if pgtables_bytes goes
negative, in addition to the warning at check_mm() function):
[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000
[ 2.539366] kmem_cache info
[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508
[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e
(...)
[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0
[ 2.552816] Modules linked in:
[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY
[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries
[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90
[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)
[ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a
[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0
[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001
[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff
[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000
[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb
[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0
[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000
[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001
[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760
[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0
[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0
[ 2.553199] Call Trace:
[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)
[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0
[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570
[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650
[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290
[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0
[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870
[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150
[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50
[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0
[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
(...)
[ 2.558892] ---[ end trace 0000000000000000 ]---
[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1
[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144
Here the modprobe process ended up with an allocated mm_struct from the
mm_struct slab that was used before by the debug_vm_pgtable test. That is
not a problem, since the mm_stru
---truncated--- |
