Total
34025 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37833 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/niu: Niu requires MSIX ENTRY_DATA fields touch before entry reads Fix niu_try_msix() to not cause a fatal trap on sparc systems. Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to work around a bug in the hardware or firmware. For each vector entry in the msix table, niu chips will cause a fatal trap if any registers in that entry are read before that entries' ENTRY_DATA register is written to. Testing indicates writes to other registers are not sufficient to prevent the fatal trap, however the value does not appear to matter. This only needs to happen once after power up, so simply rebooting into a kernel lacking this fix will NOT cause the trap. NON-RESUMABLE ERROR: Reporting on cpu 64 NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0> NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000] NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff] NON-RESUMABLE ERROR: type [precise nonresumable] NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv > NON-RESUMABLE ERROR: raddr [0xffffffffffffffff] NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c] NON-RESUMABLE ERROR: size [0x8] NON-RESUMABLE ERROR: asi [0x00] CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63 Workqueue: events work_for_cpu_fn TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted TPC: <msix_prepare_msi_desc+0x90/0xa0> g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100 g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000 o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620 o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128 RPC: <__pci_enable_msix_range+0x3cc/0x460> l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020 l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734 i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0 I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]> Call Trace: [<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu] [<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu] [<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu] [<00000000005ef3e4>] local_pci_probe+0x28/0x74 [<0000000000469240>] work_for_cpu_fn+0x8/0x1c [<000000000046b008>] process_scheduled_works+0x144/0x210 [<000000000046b518>] worker_thread+0x13c/0x1c0 [<00000000004710e0>] kthread+0xb8/0xc8 [<00000000004060c8>] ret_from_fork+0x1c/0x2c [<0000000000000000>] 0x0 Kernel panic - not syncing: Non-resumable error. | ||||
| CVE-2025-37840 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated--- | ||||
| CVE-2025-62398 | 1 Moodle | 1 Moodle | 2025-11-14 | 5.4 Medium |
| A serious authentication flaw allowed attackers with valid credentials to bypass multi-factor authentication under certain conditions, potentially compromising user accounts. | ||||
| CVE-2025-62400 | 1 Moodle | 1 Moodle | 2025-11-14 | 4.3 Medium |
| Moodle exposed the names of hidden groups to users who had permission to create calendar events but not to view hidden groups. This could reveal private or restricted group information. | ||||
| CVE-2025-38014 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Refactor remove call with idxd_cleanup() helper The idxd_cleanup() helper cleans up perfmon, interrupts, internals and so on. Refactor remove call with the idxd_cleanup() helper to avoid code duplication. Note, this also fixes the missing put_device() for idxd groups, enginces and wqs. | ||||
| CVE-2025-38016 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: abort dispatch if device destroyed The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report") | ||||
| CVE-2025-38017 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/eventpoll: fix endless busy loop after timeout has expired After commit 0a65bc27bd64 ("eventpoll: Set epoll timeout if it's in the future"), the following program would immediately enter a busy loop in the kernel: ``` int main() { int e = epoll_create1(0); struct epoll_event event = {.events = EPOLLIN}; epoll_ctl(e, EPOLL_CTL_ADD, 0, &event); const struct timespec timeout = {.tv_nsec = 1}; epoll_pwait2(e, &event, 1, &timeout, 0); } ``` This happens because the given (non-zero) timeout of 1 nanosecond usually expires before ep_poll() is entered and then ep_schedule_timeout() returns false, but `timed_out` is never set because the code line that sets it is skipped. This quickly turns into a soft lockup, RCU stalls and deadlocks, inflicting severe headaches to the whole system. When the timeout has expired, we don't need to schedule a hrtimer, but we should set the `timed_out` variable. Therefore, I suggest moving the ep_schedule_timeout() check into the `timed_out` expression instead of skipping it. brauner: Note that there was an earlier fix by Joe Damato in response to my bug report in [1]. | ||||
| CVE-2022-49954 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag syzbot is reporting hung task at __input_unregister_device() [1], for iforce_close() waiting at wait_event_interruptible() with dev->mutex held is blocking input_disconnect_device() from __input_unregister_device(). It seems that the cause is simply that commit c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device") forgot to call wake_up() after clear_bit(). Fix this problem by introducing a helper that calls clear_bit() followed by wake_up_all(). | ||||
| CVE-2022-49953 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: cm3605: Fix an error handling path in cm3605_probe() The commit in Fixes also introduced a new error handling path which should goto the existing error handling path. Otherwise some resources leak. | ||||
| CVE-2022-49983 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: Set the DMA mask for the udmabuf device (v2) If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> v2: Dont't forget to deregister if DMA mask setup fails. | ||||
| CVE-2022-49987 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: call __md_stop_writes in md_stop From the link [1], we can see raid1d was running even after the path raid_dtr -> md_stop -> __md_stop. Let's stop write first in destructor to align with normal md-raid to fix the KASAN issue. [1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a | ||||
| CVE-2022-49991 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code. | ||||
| CVE-2022-49992 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mprotect: only reference swap pfn page if type match Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ | ||||
| CVE-2022-49993 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: loop: Check for overflow while configuring loop The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e | ||||
| CVE-2022-49963 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/ttm: fix CCS handling Crucible + recent Mesa seems to sometimes hit: GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER) And it looks like we can also trigger this with gem_lmem_swapping, if we modify the test to use slightly larger object sizes. Looking closer it looks like we have the following issues in migrate_copy(): - We are using plain integer in various places, which we can easily overflow with a large object. - We pass the entire object size (when the src is lmem) into emit_pte() and then try to copy it, which doesn't work, since we only have a few fixed sized windows in which to map the pages and perform the copy. With an object > 8M we therefore aren't properly copying the pages. And then with an object > 64M we trigger the GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER). So it looks like our copy handling for any object > 8M (which is our CHUNK_SZ) is currently broken on DG2. Testcase: igt@gem_lmem_swapping (cherry picked from commit 8676145eb2f53a9940ff70910caf0125bd8a4bc2) | ||||
| CVE-2022-49964 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level Though acpi_find_last_cache_level() always returned signed value and the document states it will return any errors caused by lack of a PPTT table, it never returned negative values before. Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") however changed it by returning -ENOENT if no PPTT was found. The value returned from acpi_find_last_cache_level() is then assigned to unsigned fw_level. It will result in the number of cache leaves calculated incorrectly as a huge value which will then cause the following warning from __alloc_pages as the order would be great than MAX_ORDER because of incorrect and huge cache leaves value. | WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73 | pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __alloc_pages+0x74/0x314 | lr : alloc_pages+0xe8/0x318 | Call trace: | __alloc_pages+0x74/0x314 | alloc_pages+0xe8/0x318 | kmalloc_order_trace+0x68/0x1dc | __kmalloc+0x240/0x338 | detect_cache_attributes+0xe0/0x56c | update_siblings_masks+0x38/0x284 | store_cpu_topology+0x78/0x84 | smp_prepare_cpus+0x48/0x134 | kernel_init_freeable+0xc4/0x14c | kernel_init+0x2c/0x1b4 | ret_from_fork+0x10/0x20 Fix the same by changing fw_level to be signed integer and return the error from init_cache_level() early in case of error. | ||||
| CVE-2025-38029 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kasan: avoid sleepable page allocation from atomic context apply_to_pte_range() enters the lazy MMU mode and then invokes kasan_populate_vmalloc_pte() callback on each page table walk iteration. However, the callback can go into sleep when trying to allocate a single page, e.g. if an architecutre disables preemption on lazy MMU mode enter. On s390 if make arch_enter_lazy_mmu_mode() -> preempt_enable() and arch_leave_lazy_mmu_mode() -> preempt_disable(), such crash occurs: [ 0.663336] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321 [ 0.663348] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd [ 0.663358] preempt_count: 1, expected: 0 [ 0.663366] RCU nest depth: 0, expected: 0 [ 0.663375] no locks held by kthreadd/2. [ 0.663383] Preemption disabled at: [ 0.663386] [<0002f3284cbb4eda>] apply_to_pte_range+0xfa/0x4a0 [ 0.663405] CPU: 0 UID: 0 PID: 2 Comm: kthreadd Not tainted 6.15.0-rc5-gcc-kasan-00043-gd76bb1ebb558-dirty #162 PREEMPT [ 0.663408] Hardware name: IBM 3931 A01 701 (KVM/Linux) [ 0.663409] Call Trace: [ 0.663410] [<0002f3284c385f58>] dump_stack_lvl+0xe8/0x140 [ 0.663413] [<0002f3284c507b9e>] __might_resched+0x66e/0x700 [ 0.663415] [<0002f3284cc4f6c0>] __alloc_frozen_pages_noprof+0x370/0x4b0 [ 0.663419] [<0002f3284ccc73c0>] alloc_pages_mpol+0x1a0/0x4a0 [ 0.663421] [<0002f3284ccc8518>] alloc_frozen_pages_noprof+0x88/0xc0 [ 0.663424] [<0002f3284ccc8572>] alloc_pages_noprof+0x22/0x120 [ 0.663427] [<0002f3284cc341ac>] get_free_pages_noprof+0x2c/0xc0 [ 0.663429] [<0002f3284cceba70>] kasan_populate_vmalloc_pte+0x50/0x120 [ 0.663433] [<0002f3284cbb4ef8>] apply_to_pte_range+0x118/0x4a0 [ 0.663435] [<0002f3284cbc7c14>] apply_to_pmd_range+0x194/0x3e0 [ 0.663437] [<0002f3284cbc99be>] __apply_to_page_range+0x2fe/0x7a0 [ 0.663440] [<0002f3284cbc9e88>] apply_to_page_range+0x28/0x40 [ 0.663442] [<0002f3284ccebf12>] kasan_populate_vmalloc+0x82/0xa0 [ 0.663445] [<0002f3284cc1578c>] alloc_vmap_area+0x34c/0xc10 [ 0.663448] [<0002f3284cc1c2a6>] __get_vm_area_node+0x186/0x2a0 [ 0.663451] [<0002f3284cc1e696>] __vmalloc_node_range_noprof+0x116/0x310 [ 0.663454] [<0002f3284cc1d950>] __vmalloc_node_noprof+0xd0/0x110 [ 0.663457] [<0002f3284c454b88>] alloc_thread_stack_node+0xf8/0x330 [ 0.663460] [<0002f3284c458d56>] dup_task_struct+0x66/0x4d0 [ 0.663463] [<0002f3284c45be90>] copy_process+0x280/0x4b90 [ 0.663465] [<0002f3284c460940>] kernel_clone+0xd0/0x4b0 [ 0.663467] [<0002f3284c46115e>] kernel_thread+0xbe/0xe0 [ 0.663469] [<0002f3284c4e440e>] kthreadd+0x50e/0x7f0 [ 0.663472] [<0002f3284c38c04a>] __ret_from_fork+0x8a/0xf0 [ 0.663475] [<0002f3284ed57ff2>] ret_from_fork+0xa/0x38 Instead of allocating single pages per-PTE, bulk-allocate the shadow memory prior to applying kasan_populate_vmalloc_pte() callback on a page range. | ||||
| CVE-2025-38032 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mr: consolidate the ipmr_can_free_table() checks. Guoyu Yin reported a splat in the ipmr netns cleanup path: WARNING: CPU: 2 PID: 14564 at net/ipv4/ipmr.c:440 ipmr_free_table net/ipv4/ipmr.c:440 [inline] WARNING: CPU: 2 PID: 14564 at net/ipv4/ipmr.c:440 ipmr_rules_exit+0x135/0x1c0 net/ipv4/ipmr.c:361 Modules linked in: CPU: 2 UID: 0 PID: 14564 Comm: syz.4.838 Not tainted 6.14.0 #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ipmr_free_table net/ipv4/ipmr.c:440 [inline] RIP: 0010:ipmr_rules_exit+0x135/0x1c0 net/ipv4/ipmr.c:361 Code: ff df 48 c1 ea 03 80 3c 02 00 75 7d 48 c7 83 60 05 00 00 00 00 00 00 5b 5d 41 5c 41 5d 41 5e e9 71 67 7f 00 e8 4c 2d 8a fd 90 <0f> 0b 90 eb 93 e8 41 2d 8a fd 0f b6 2d 80 54 ea 01 31 ff 89 ee e8 RSP: 0018:ffff888109547c58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888108c12dc0 RCX: ffffffff83e09868 RDX: ffff8881022b3300 RSI: ffffffff83e098d4 RDI: 0000000000000005 RBP: ffff888104288000 R08: 0000000000000000 R09: ffffed10211825c9 R10: 0000000000000001 R11: ffff88801816c4a0 R12: 0000000000000001 R13: ffff888108c13320 R14: ffff888108c12dc0 R15: fffffbfff0b74058 FS: 00007f84f39316c0(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f84f3930f98 CR3: 0000000113b56000 CR4: 0000000000350ef0 Call Trace: <TASK> ipmr_net_exit_batch+0x50/0x90 net/ipv4/ipmr.c:3160 ops_exit_list+0x10c/0x160 net/core/net_namespace.c:177 setup_net+0x47d/0x8e0 net/core/net_namespace.c:394 copy_net_ns+0x25d/0x410 net/core/net_namespace.c:516 create_new_namespaces+0x3f6/0xaf0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc3/0x180 kernel/nsproxy.c:228 ksys_unshare+0x78d/0x9a0 kernel/fork.c:3342 __do_sys_unshare kernel/fork.c:3413 [inline] __se_sys_unshare kernel/fork.c:3411 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3411 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xa6/0x1a0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f84f532cc29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f84f3931038 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f84f5615fa0 RCX: 00007f84f532cc29 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000400 RBP: 00007f84f53fba18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f84f5615fa0 R15: 00007fff51c5f328 </TASK> The running kernel has CONFIG_IP_MROUTE_MULTIPLE_TABLES disabled, and the sanity check for such build is still too loose. Address the issue consolidating the relevant sanity check in a single helper regardless of the kernel configuration. Also share it between the ipv4 and ipv6 code. | ||||
| CVE-2025-38033 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88 Calling core::fmt::write() from rust code while FineIBT is enabled results in a kernel panic: [ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132! [ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599 [ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE [ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0 ... [ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20 [ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7 [ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246 [ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88 [ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070 [ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8 [ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000 [ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10 [ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250 This happens because core::fmt::write() calls core::fmt::rt::Argument::fmt(), which currently has CFI disabled: library/core/src/fmt/rt.rs: 171 // FIXME: Transmuting formatter in new and indirectly branching to/calling 172 // it here is an explicit CFI violation. 173 #[allow(inline_no_sanitize)] 174 #[no_sanitize(cfi, kcfi)] 175 #[inline] 176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result { This causes a Control Protection exception, because FineIBT has sealed off the original function's endbr64. This makes rust currently incompatible with FineIBT. Add a Kconfig dependency that prevents FineIBT from getting turned on by default if rust is enabled. [ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1], and thus we relaxed the condition with Rust >= 1.88. When `objtool` lands checking for this with e.g. [2], the plan is to ideally run that in upstream Rust's CI to prevent regressions early [3], since we do not control `core`'s source code. Alice tested the Rust PR backported to an older compiler. Peter would like that Rust provides a stable `core` which can be pulled into the kernel: "Relying on that much out of tree code is 'unfortunate'". - Miguel ] [ Reduced splat. - Miguel ] | ||||
| CVE-2025-38036 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Perform early GT MMIO initialization to read GMDID VFs need to communicate with the GuC to obtain the GMDID value and existing GuC functions used for that assume that the GT has it's MMIO members already setup. However, due to recent refactoring the gt->mmio is initialized later, and any attempt by the VF to use xe_mmio_read|write() from GuC functions will lead to NPD crash due to unset MMIO register address: [] xe 0000:00:02.1: [drm] Running in SR-IOV VF mode [] xe 0000:00:02.1: [drm] GT0: sending H2G MMIO 0x5507 [] BUG: unable to handle page fault for address: 0000000000190240 Since we are already tweaking the id and type of the primary GT to mimic it's a Media GT before initializing the GuC communication, we can also call xe_gt_mmio_init() to perform early setup of the gt->mmio which will make those GuC functions work again. | ||||