| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of weak credentials in emergency authentication component in Devolutions Server allows an unauthenticated attacker to bypass authentication via brute forcing the short emergency codes generated by the server within a feasible timeframe.
This issue affects the following versions :
* Devolutions Server 2025.2.2.0 through 2025.2.3.0
*
Devolutions Server 2025.1.11.0 and earlier |
| Improper access control in user group management in Devolutions Server 2025.1.7.0 and earlier allows a non-administrative user with both "User Management" and "User Group Management" permissions to perform privilege escalation by adding users to groups with administrative privileges. |
| Improper authorization in the temporary access workflow of Devolutions Server 2025.2.12.0 and earlier allows an authenticated basic user to self-approve or approve the temporary access requests of other users and gain unauthorized access to vaults and entries via crafted API requests. |
| On Zyxel NBG2105 V1.00(AAGU.2)C0 devices, setting the login cookie to 1 provides administrator access. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: shutdown driver when hardware is unreliable
In rare cases, ath10k may lose connection with the PCIe bus due to
some unknown reasons, which could further lead to system crashes during
resuming due to watchdog timeout:
ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware
ath10k_pci 0000:01:00.0: already restarting
ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11
ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11
ieee80211 phy0: PM: **** DPM device timeout ****
Call Trace:
panic+0x125/0x315
dpm_watchdog_set+0x54/0x54
dpm_watchdog_handler+0x57/0x57
call_timer_fn+0x31/0x13c
At this point, all WMI commands will timeout and attempt to restart
device. So set a threshold for consecutive restart failures. If the
threshold is exceeded, consider the hardware is unreliable and all
ath10k operations should be skipped to avoid system crash.
fail_cont_count and pending_recovery are atomic variables, and
do not involve complex conditional logic. Therefore, even if recovery
check and reconfig complete are executed concurrently, the recovery
mechanism will not be broken.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Add error handling for krealloc in metadata setup
Function msm_ioctl_gem_info_set_metadata() now checks for krealloc
failure and returns -ENOMEM, avoiding potential NULL pointer dereference.
Explicitly avoids __GFP_NOFAIL due to deadlock risks and allocation constraints.
Patchwork: https://patchwork.freedesktop.org/patch/661235/ |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: fix concurrency management in ism_cmd()
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: fix potential buffer overflow in setup_clusters()
In setup_swap_map(), we only ensure badpages are in range (0, last_page].
As maxpages might be < last_page, setup_clusters() will encounter a buffer
overflow when a badpage is >= maxpages.
Only call inc_cluster_info_page() for badpage which is < maxpages to fix
the issue. |
| axios is a promise based HTTP client for the browser and node.js. The issue occurs when passing absolute URLs rather than protocol-relative URLs to axios. Even if baseURL is set, axios sends the request to the specified absolute URL, potentially causing SSRF and credential leakage. This issue impacts both server-side and client-side usage of axios. This issue is fixed in 1.8.2. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()
ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to
ieee80211_iterate_stations_atomic(). Note in this case the iterator is
required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does
not follow it as it might sleep. Consequently below warning is seen:
BUG: sleeping function called from invalid context at wmi.c:304
Call Trace:
<TASK>
dump_stack_lvl
__might_resched.cold
ath11k_wmi_cmd_send
ath11k_wmi_set_peer_param
ath11k_mac_disable_peer_fixed_rate
ieee80211_iterate_stations_atomic
ath11k_mac_op_set_bitrate_mask.cold
Change to ieee80211_iterate_stations_mtx() to fix this issue.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| In the Linux kernel, the following vulnerability has been resolved:
team: replace team lock with rtnl lock
syszbot reports various ordering issues for lower instance locks and
team lock. Switch to using rtnl lock for protecting team device,
similar to bonding. Based on the patch by Tetsuo Handa. |
| DuckDB is a SQL database management system. DuckDB implemented block-based encryption of DB on the filesystem starting with DuckDB 1.4.0. There are a few issues related to this implementation. The DuckDB can fall back to an insecure random number generator (pcg32) to generate cryptographic keys or IVs. When clearing keys from memory, the compiler may remove the memset() and leave sensitive data on the heap. By modifying the database header, an attacker could downgrade the encryption mode from GCM to CTR to bypass integrity checks. There may be a failure to check return value on call to OpenSSL `rand_bytes()`. An attacker could use public IVs to compromise the internal state of RNG and determine the randomly generated key used to encrypt temporary files, get access to cryptographic keys if they have access to process memory (e.g. through memory leak),circumvent GCM integrity checks, and/or influence the OpenSSL random number generator and DuckDB would not be able to detect a failure of the generator. Version 1.4.2 has disabled the insecure random number generator by no longer using the fallback to write to or create databases. Instead, DuckDB will now attempt to install and load the OpenSSL implementation in the `httpfs` extension. DuckDB now uses secure MbedTLS primitive to clear memory as recommended and requires explicit specification of ciphers without integrity checks like CTR on `ATTACH`. Additionally, DuckDB now checks the return code. |
| Mozilla Firefox before 28.0, Firefox ESR 24.x before 24.4, Thunderbird before 24.4, and SeaMonkey before 2.25 allow remote attackers to bypass the popup blocker via unspecified vectors. |
| The Web IDL implementation in Mozilla Firefox before 28.0, Firefox ESR 24.x before 24.4, Thunderbird before 24.4, and SeaMonkey before 2.25 allows remote attackers to execute arbitrary JavaScript code with chrome privileges by using an IDL fragment to trigger a window.open call. |
| Mozilla Network Security Services (NSS) before 3.15.4, as used in Mozilla Firefox before 27.0, Firefox ESR 24.x before 24.3, Thunderbird before 24.3, SeaMonkey before 2.24, and other products, does not properly restrict public values in Diffie-Hellman key exchanges, which makes it easier for remote attackers to bypass cryptographic protection mechanisms in ticket handling by leveraging use of a certain value. |
| Incorrect handling of __proto__ mutations may lead to type confusion in IonMonkey JIT code and can be leveraged for arbitrary memory read and write. This vulnerability affects Firefox < 66.0.1, Firefox ESR < 60.6.1, and Thunderbird < 60.6.1. |
| A mechanism to bypass file system access protections in the sandbox to use the file picker to access different files than those selected in the file picker through the use of relative paths. This allows for read only access to the local file system. This vulnerability affects Thunderbird < 52.1, Firefox ESR < 52.1, and Firefox < 53. |
| Mozilla developers and community members reported memory safety bugs present in Firefox 65, Firefox ESR 60.5, and Thunderbird 60.5. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Thunderbird < 60.6, Firefox ESR < 60.6, and Firefox < 66. |
| Use-after-free vulnerability in the nsHostResolver::ConditionallyRefreshRecord function in libxul.so in Mozilla Firefox before 29.0, Firefox ESR 24.x before 24.5, Thunderbird before 24.5, and SeaMonkey before 2.26 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via vectors related to host resolution. |
| Use-after-free vulnerability in the nsGenericHTMLElement::GetWidthHeightForImage function in Mozilla Firefox before 29.0, Firefox ESR 24.x before 24.5, Thunderbird before 24.5, and SeaMonkey before 2.26 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via vectors involving an imgLoader object that is not properly handled during an image-resize operation. |
