| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CWE-1104: Use of Unmaintained Third-Party Components vulnerability exists that could cause complete
control of the device when an authenticated user installs malicious code into HMI product. |
| The NetCloud Exchange client for Windows, version 1.110.50, contains an insecure file and folder permissions vulnerability. A normal (non-admin) user could exploit the weakness in file and folder permissions to escalate privileges, execute arbitrary code and maintain persistence on the compromised machine. It has been identified that full control permissions exist on the ‘Everyone’ group (i.e. any user who has local access to the operating system regardless of their privileges). |
| A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition. |
| DBPower C300 HD Camera contains a configuration disclosure vulnerability that allows unauthenticated attackers to retrieve sensitive credentials through an unprotected configuration backup endpoint. Attackers can download the configuration file and extract hardcoded username and password by accessing the /tmpfs/config_backup.bin resource. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: Delay the unmapping of the buffer
On WCN3990, we are seeing a rare scenario where copy engine hardware is
sending a copy complete interrupt to the host driver while still
processing the buffer that the driver has sent, this is leading into an
SMMU fault triggering kernel panic. This is happening on copy engine
channel 3 (CE3) where the driver normally enqueues WMI commands to the
firmware. Upon receiving a copy complete interrupt, host driver will
immediately unmap and frees the buffer presuming that hardware has
processed the buffer. In the issue case, upon receiving copy complete
interrupt, host driver will unmap and free the buffer but since hardware
is still accessing the buffer (which in this case got unmapped in
parallel), SMMU hardware will trigger an SMMU fault resulting in a
kernel panic.
In order to avoid this, as a work around, add a delay before unmapping
the copy engine source DMA buffer. This is conditionally done for
WCN3990 and only for the CE3 channel where issue is seen.
Below is the crash signature:
wifi smmu error: kernel: [ 10.120965] arm-smmu 15000000.iommu: Unhandled
context fault: fsr=0x402, iova=0x7fdfd8ac0,
fsynr=0x500003,cbfrsynra=0xc1, cb=6 arm-smmu 15000000.iommu: Unhandled
context fault:fsr=0x402, iova=0x7fe06fdc0, fsynr=0x710003,
cbfrsynra=0xc1, cb=6 qcom-q6v5-mss 4080000.remoteproc: fatal error
received: err_qdi.c:1040:EF:wlan_process:0x1:WLAN RT:0x2091:
cmnos_thread.c:3998:Asserted in copy_engine.c:AXI_ERROR_DETECTED:2149
remoteproc remoteproc0: crash detected in
4080000.remoteproc: type fatal error <3> remoteproc remoteproc0:
handling crash #1 in 4080000.remoteproc
pc : __arm_lpae_unmap+0x500/0x514
lr : __arm_lpae_unmap+0x4bc/0x514
sp : ffffffc011ffb530
x29: ffffffc011ffb590 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000004
x25: 0000000000000003 x24: ffffffc011ffb890
x23: ffffffa762ef9be0 x22: ffffffa77244ef00
x21: 0000000000000009 x20: 00000007fff7c000
x19: 0000000000000003 x18: 0000000000000000
x17: 0000000000000004 x16: ffffffd7a357d9f0
x15: 0000000000000000 x14: 00fd5d4fa7ffffff
x13: 000000000000000e x12: 0000000000000000
x11: 00000000ffffffff x10: 00000000fffffe00
x9 : 000000000000017c x8 : 000000000000000c
x7 : 0000000000000000 x6 : ffffffa762ef9000
x5 : 0000000000000003 x4 : 0000000000000004
x3 : 0000000000001000 x2 : 00000007fff7c000
x1 : ffffffc011ffb890 x0 : 0000000000000000 Call trace:
__arm_lpae_unmap+0x500/0x514
__arm_lpae_unmap+0x4bc/0x514
__arm_lpae_unmap+0x4bc/0x514
arm_lpae_unmap_pages+0x78/0xa4
arm_smmu_unmap_pages+0x78/0x104
__iommu_unmap+0xc8/0x1e4
iommu_unmap_fast+0x38/0x48
__iommu_dma_unmap+0x84/0x104
iommu_dma_free+0x34/0x50
dma_free_attrs+0xa4/0xd0
ath10k_htt_rx_free+0xc4/0xf4 [ath10k_core] ath10k_core_stop+0x64/0x7c
[ath10k_core]
ath10k_halt+0x11c/0x180 [ath10k_core]
ath10k_stop+0x54/0x94 [ath10k_core]
drv_stop+0x48/0x1c8 [mac80211]
ieee80211_do_open+0x638/0x77c [mac80211] ieee80211_open+0x48/0x5c
[mac80211]
__dev_open+0xb4/0x174
__dev_change_flags+0xc4/0x1dc
dev_change_flags+0x3c/0x7c
devinet_ioctl+0x2b4/0x580
inet_ioctl+0xb0/0x1b4
sock_do_ioctl+0x4c/0x16c
compat_ifreq_ioctl+0x1cc/0x35c
compat_sock_ioctl+0x110/0x2ac
__arm64_compat_sys_ioctl+0xf4/0x3e0
el0_svc_common+0xb4/0x17c
el0_svc_compat_handler+0x2c/0x58
el0_svc_compat+0x8/0x2c
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 |
| A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of path traversal bypass when verifying file permissions.
Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. |
| In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before e3277eb, unlimited user label appends in a userlabel cluster can lead to a denial of service (resource exhaustion). |
| In raw\TCP.cpp in Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before 27ca6ec, there is a NULL pointer dereference in TCPBase::ProcessSingleMessage via TCP packets with zero messageSize, leading to denial of service. |
| A flaw was found in Keycloak. By setting a verification policy to 'ALL', the trust store certificate verification is skipped, which is unintended. |
| In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0, the WriteAcl function deletes all existing ACL entries first, and then attempts to recreate them based on user input. If input validation fails during decoding, the process stops, and no entries are restored by access-control-server.cpp, i.e., a denial of service. |
| Frigate is a network video recorder (NVR) with realtime local object detection for IP cameras. Prior to 0.16.2, Frigate's export workflow allows an authenticated operator to nominate any filesystem location as the thumbnail source for a video export. Because that path is copied verbatim into the publicly served clips directory, the feature can be abused to read arbitrary files that reside on the host running Frigate. In practice, a low-privilege user with API access can pivot from viewing camera footage to exfiltrating sensitive configuration files, secrets, or user data from the appliance itself. This behavior violates the principle of least privilege for the export subsystem and turns a convenience feature into a direct information disclosure vector, with exploitation hinging on a short race window while the background exporter copies the chosen file into place before cleanup runs. This vulnerability is fixed in 0.16.2. |
| This vulnerability could lead to denial-of-service or service crashes. Exploitation of the moxa_cmd service, because of insufficient input validation, allows attackers to disrupt operations. If exposed to public networks, the vulnerability poses a significant remote threat, potentially allowing attackers to shut down affected systems. |
| Cocotais Bot is a QQ official robot framework based on qq-bot-sdk. Starting in version 1.5.0-test2-hotfix and prior to version 1.6.2, command echoing feature in the framework allows users to indirectly trigger privileged behavior by injecting special platform tags. Specifically, an unauthorized user can use the `/echo <qqbot-at-everyone />` command to cause the bot to send a message that mentions all members in the chat, bypassing any permission controls. This can lead to spam, disruption, or abuse of notification systems. Version 1.6.2 contains a patch for the issue. |
| A vulnerability was found in ESAPI esapi-java-legacy and classified as problematic. This issue affects the interface Encoder.encodeForSQL of the SQL Injection Defense. An attack leads to an improper neutralization of special elements. The attack may be initiated remotely and an exploit has been disclosed to the public. The project was contacted early about this issue and handled it with an exceptional level of professionalism. Upgrading to version 2.7.0.0 is able to address this issue. Commit ID f75ac2c2647a81d2cfbdc9c899f8719c240ed512 is disabling the feature by default and any attempt to use it will trigger a warning. And commit ID e2322914304d9b1c52523ff24be495b7832f6a56 is updating the misleading Java class documentation to warn about the risks. |
| The URL Image Importer plugin for WordPress is vulnerable to arbitrary file uploads due to insufficient file type validation in all versions up to, and including, 1.0.6. This is due to the plugin relying on a user-controlled Content-Type HTTP header to validate file uploads in the 'uimptr_import_image_from_url()' function which writes the file to the server before performing proper validation. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible via the uploaded PHP file. |
| Statmatic is a Laravel and Git powered content management system (CMS). Stored XSS vulnerabilities in Collections and Taxonomies allow authenticated users with content creation permissions to inject malicious JavaScript that executes when viewed by higher-privileged users. This vulnerability is fixed in 5.22.1. |
| A vulnerability has been identified in Mendix LDAP (All versions < V1.1.2). Affected versions of the module are vulnerable to LDAP injection. This could allow an unauthenticated remote attacker to bypass username verification. |
| EDK2 contains a vulnerability in BIOS where an attacker may cause “Protection Mechanism Failure” by local access. Successful exploitation of this vulnerability will lead to arbitrary code execution and impact Confidentiality, Integrity, and Availability. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Centreon BAM (Boolean KPi Listing modules) allows SQL Injection.
This page is only accessible to authenticated users with high privileges.
This issue affects Centreon BAM: from 24.10 before 24.10.1, from 24.04 before 24.04.5, from 23.10 before 23.10.10, from 23.04 before 23.04.10. |
| A Cross-Site Request Forgery (CSRF) vulnerability in Geovision GV-ASWeb application with the version 6.1.1.0 or less that allows attackers to arbitrarily create Administrator accounts via a crafted GET request method. This vulnerability is used in chain with CVE-2024-56903 for a successful CSRF attack. |
