| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix buffer size in gfx_v9_4_3_init_ cp_compute_microcode() and rlc_microcode()
The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating
about potential truncation of output when using the snprintf function.
The issue was due to the size of the buffer 'ucode_prefix' being too
small to accommodate the maximum possible length of the string being
written into it.
The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin",
where %s is replaced by the value of 'chip_name'. The length of this
string without the %s is 16 characters. The warning message indicated
that 'chip_name' could be up to 29 characters long, resulting in a total
of 45 characters, which exceeds the buffer size of 30 characters.
To resolve this issue, the size of the 'ucode_prefix' buffer has been
reduced from 30 to 15. This ensures that the maximum possible length of
the string being written into the buffer will not exceed its size, thus
preventing potential buffer overflow and truncation issues.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~
......
439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~
......
443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| In the Linux kernel, the following vulnerability has been resolved:
dma-mapping: benchmark: handle NUMA_NO_NODE correctly
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark()
resulting in the following sanitizer report:
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask [64][1]'
CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
ubsan_epilogue (lib/ubsan.c:232)
__ubsan_handle_out_of_bounds (lib/ubsan.c:429)
cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline]
do_map_benchmark (kernel/dma/map_benchmark.c:104)
map_benchmark_ioctl (kernel/dma/map_benchmark.c:246)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Use cpumask_of_node() in place when binding a kernel thread to a cpuset
of a particular node.
Note that the provided node id is checked inside map_benchmark_ioctl().
It's just a NUMA_NO_NODE case which is not handled properly later.
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: prevent pt_regs corruption for secondary idle threads
Top of the kernel thread stack should be reserved for pt_regs. However
this is not the case for the idle threads of the secondary boot harts.
Their stacks overlap with their pt_regs, so both may get corrupted.
Similar issue has been fixed for the primary hart, see c7cdd96eca28
("riscv: prevent stack corruption by reserving task_pt_regs(p) early").
However that fix was not propagated to the secondary harts. The problem
has been noticed in some CPU hotplug tests with V enabled. The function
smp_callin stored several registers on stack, corrupting top of pt_regs
structure including status field. As a result, kernel attempted to save
or restore inexistent V context. |
| An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in Security Update 2022-004 Catalina, macOS Monterey 12.4, macOS Big Sur 11.6.6. A malicious application may be able to execute arbitrary code with kernel privileges. |
| This issue was addressed with improved checks. This issue is fixed in macOS Monterey 12.4, macOS Big Sur 11.6.6. An attacker may be able to cause unexpected application termination or arbitrary code execution. |
| An integer overflow was addressed with improved input validation. This issue is fixed in Security Update 2022-004 Catalina, macOS Monterey 12.4. An attacker may be able to cause unexpected application termination or arbitrary code execution. |
| A memory corruption issue was addressed with improved state management. This issue is fixed in macOS Monterey 12.4. An application may be able to execute arbitrary code with kernel privileges. |
| In Modem, there is a possible memory corruption due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01182594; Issue ID: MSV-1529. |
| S-Lang 2.3.2 was discovered to contain a segmentation fault via the function fixup_tgetstr(). |
| quickjs-ng through 0.9.0 has an incorrect size calculation in JS_ReadBigInt for a BigInt, leading to a heap-based buffer overflow. QuickJS before 2025-04-26 is also affected. |
| Improper input validation in the user management function of web interface in Aten PE6208 2.3.228 and 2.4.232 allows remote authenticated users to cause a partial DoS of web interface via HTTP POST request. |
| Aten PE6208 2.3.228 and 2.4.232 have default credentials for the privileged web interface account. The user is not asked to change the credentials after first login. If not changed, attackers can log in to the web interface and gain administrator privileges. |
| Integer underflow in WebUI in Google Chrome prior to 121.0.6167.85 allowed a remote attacker to potentially exploit heap corruption via a malicious file. (Chromium security severity: High) |
| It was possible for certain browser prompts and dialogs to be activated or dismissed unintentionally by the user due to an incorrect timestamp used to prevent input after page load. This vulnerability affects Firefox < 122, Firefox ESR < 115.7, and Thunderbird < 115.7. |
| Buffer Overflow vulnerability in the main() function in Mathtex 1.05 and before allows a remote attacker to cause a denial of service when using \convertpath. |
| Buffer Overflow vulnerability in Mathtex v.1.05 and before allows a remote attacker to execute arbitrary code via the length of the LaTeX string component. |
| Buffer over-read vulnerability in the dtls_sha256_update function in Contiki-NG tinyDTLS through master branch 53a0d97 allows remote attackers to cause a denial of service via crafted data packet. |
| A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as problematic. This vulnerability affects unknown code of the component PUT Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251554 is the identifier assigned to this vulnerability. |
| Trillium is a composable toolkit for building internet applications with async rust. In `trillium-http` prior to 0.3.12 and `trillium-client` prior to 0.5.4, insufficient validation of outbound header values may lead to request splitting or response splitting attacks in scenarios where attackers have sufficient control over headers. This only affects use cases where attackers have control of request headers, and can insert "\r\n" sequences. Specifically, if untrusted and unvalidated input is inserted into header names or values.
Outbound `trillium_http::HeaderValue` and `trillium_http::HeaderName` can be constructed infallibly and were not checked for illegal bytes when sending requests from the client or responses from the server. Thus, if an attacker has sufficient control over header values (or names) in a request or response that they could inject `\r\n` sequences, they could get the client and server out of sync, and then pivot to gain control over other parts of requests or responses. (i.e. exfiltrating data from other requests, SSRF, etc.)
In `trillium-http` versions 0.3.12 and later, if a header name is invalid in server response headers, the specific header and any associated values are omitted from network transmission. Additionally, if a header value is invalid in server response headers, the individual header value is omitted from network transmission. Other headers values with the same header name will still be sent. In `trillium-client` versions 0.5.4 and later, if any header name or header value is invalid in the client request headers, awaiting the client Conn returns an `Error::MalformedHeader` prior to any network access. As a workaround, Trillium services and client applications should sanitize or validate untrusted input that is included in header values and header names. Carriage return, newline, and null characters are not allowed. |
