| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The GC-AGENTS-SERVICE running as part of Akamai´s Guardicore Platform Agent for Windows versions prior to v49.20.1, v50.15.0, v51.12.0, v52.2.0 is affected by a local privilege escalation vulnerability. The service will attempt to read an OpenSSL configuration file from a non-existent location that standard Windows users have default write access to. This allows an unprivileged local user to create a crafted "openssl.cnf" file in that location and, by specifying the path to a custom DLL file in a custom OpenSSL engine definition, execute arbitrary commands with the privileges of the Guardicore Agent process. Since Guardicore Agent runs with SYSTEM privileges, this permits an unprivileged user to fully elevate privileges to SYSTEM level in this manner. |
| An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection. |
| CWE-269: Improper Privilege Management vulnerability exists for two services (of which one managing audit
trail data and the other acting as server managing client request) that could cause a loss of Confidentiality,
Integrity and Availability of engineering workstation when an attacker with standard privilege modifies the
executable path of the windows services. To be exploited, services need to be restarted. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| The RapidLoad – Optimize Web Vitals Automatically plugin for WordPress is vulnerable to unauthorized access of data and modification of data due to a missing capability check on the uucss_data, update_rapidload_settings, wp_ajax_update_htaccess_file, uucss_update_rule, upload_rules, get_all_rules, update_titan_settings, preload_page, and activate_module functions in all versions up to, and including, 2.4.2. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify plugin settings or conduct SQL injection attacks. |
| Out-of-bounds write in the firmware for the Intel(R) AMT and Intel(R) Standard Manageability within Ring 3: User Applications may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (low) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.16.11, a bug in a mod_auth_openidc results in disclosure of protected content to unauthenticated users. The conditions for disclosure are an OIDCProviderAuthRequestMethod POST, a valid account, and there mustn't be any application-level gateway (or load balancer etc) protecting the server. When you request a protected resource, the response includes the HTTP status, the HTTP headers, the intended response (the self-submitting form), and the protected resource (with no headers). This is an example of a request for a protected resource, including all the data returned. In the case where mod_auth_openidc returns a form, it has to return OK from check_userid so as not to go down the error path in httpd. This means httpd will try to issue the protected resource. oidc_content_handler is called early, which has the opportunity to prevent the normal output being issued by httpd. oidc_content_handler has a number of checks for when it intervenes, but it doesn't check for this case, so the handler returns DECLINED. Consequently, httpd appends the protected content to the response. The issue has been patched in mod_auth_openidc versions >= 2.4.16.11. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: make sure the cdev fd is still active before emitting events
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released. |
| : Modification of Assumed-Immutable Data (MAID) vulnerability in ABB ANC, ABB ANC-L, ABB ANC-mini.This issue affects ANC: through 1.1.4; ANC-L: through 1.1.4; ANC-mini: through 1.1.4. |
| The Bit Form plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'iconUpload' function in all versions up to, and including, 2.13.3. This makes it possible for authenticated attackers, with administrator-level and above permissions, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| A vulnerability was found in jack0240 魏 bskms 蓝天幼儿园管理系统 up to dffe6640b5b54d8e29da6f060e0493fea74b3fad. It has been rated as critical. Affected by this issue is some unknown functionality of the file /sa/addUser of the component User Creation Handler. The manipulation leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| General Industrial Controls Lynx+ Gateway is vulnerable to a weak password requirement vulnerability, which may
allow an attacker to execute a brute-force attack resulting in
unauthorized access and login. |
| Incorrect access control in the component l_0_0.xml of TP-Link ARCHER-C7 v5 allows attackers to access sensitive information. |
| Oxford Nanopore Technologies' MinKNOW software at or prior to version 24.11 stores authentication tokens in a file located in the system's temporary directory (/tmp) on the host machine. This directory is typically world-readable, allowing any local user or application to access the token. If the token is leaked (e.g., via malware infection or other local exploit), and remote access is enabled, it can be used to establish unauthorized remote connections to the sequencer. Remote access must be enabled for remote exploitation to succeed. This may occur either because the user has enabled remote access for legitimate operational reasons or because malware with elevated privileges (e.g., sudo access) enables it without user consent. This vulnerability can be chained with remote access capabilities to generate a developer token from a remote device. Developer tokens can be created with arbitrary expiration dates, enabling persistent access to the sequencer and bypassing standard authentication mechanisms. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in jegtheme JNews - Pay Writer jnews-pay-writer allows PHP Local File Inclusion.This issue affects JNews - Pay Writer: from n/a through <= 11.0.0. |
| The Amazon.ApplicationLoadBalancer.Identity.AspNetCore repo https://github.com/awslabs/aws-alb-identity-aspnetcore#validatetokensignature contains Middleware that can be used in conjunction with the Application Load Balancer (ALB) OpenId Connect integration and can be used in any ASP.NET https://dotnet.microsoft.com/apps/aspnet Core deployment scenario, including Fargate, EKS, ECS, EC2, and Lambda. In the JWT handling code, it performs signature validation but fails to validate the JWT issuer and signer identity. The signer omission, if combined with a scenario where the infrastructure owner allows internet traffic to the ALB targets (not a recommended configuration), can allow for JWT signing by an untrusted entity and an actor may be able to mimic valid OIDC-federated sessions to the ALB targets.
The repository/package has been deprecated, is end of life, and is no longer supported. As a security best practice, ensure that your ELB targets (e.g. EC2 Instances, Fargate Tasks etc.) do not have public IP addresses. Ensure any forked or derivative code validate that the signer attribute in the JWT match the ARN of the Application Load Balancer that the service is configured to use. |
| A vulnerability in Okta Verify for iOS versions 9.25.1 (beta) and 9.27.0 (including beta) allows push notification responses through the iOS ContextExtension feature allowing the authentication to proceed regardless of the user’s selection. When a user long-presses the notification banner and selects an option, both options allow the authentication to succeed.
The ContextExtension feature is one of several push mechanisms available when using Okta Verify Push on iOS devices. The vulnerable flows include:
* When a user is presented with a notification on a locked screen, the user presses on the notification directly and selects their reply without unlocking the device;
* When a user is presented with a notification on the home screen and drags the notification down and selects their reply;
* When an Apple Watch is used to reply directly to a notification.
A pre-condition for this vulnerability is that the user must have enrolled in Okta Verify while the Okta customer was using Okta Classic. This applies irrespective of whether the organization has since upgraded to Okta Identity Engine. |
| A vulnerability has been found in E-Lins H685, H685f, H700, H720, H750, H820, H820Q, H820Q0 and H900 up to 3.2 and classified as critical. This vulnerability affects unknown code of the component OEM Backend. The manipulation leads to hard-coded credentials. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to change the configuration settings. The vendor was contacted early about this disclosure but did not respond in any way. |
