| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix refcount leak in nfsd_set_fh_dentry()
nfsd exports a "pseudo root filesystem" which is used by NFSv4 to find
the various exported filesystems using LOOKUP requests from a known root
filehandle. NFSv3 uses the MOUNT protocol to find those exported
filesystems and so is not given access to the pseudo root filesystem.
If a v3 (or v2) client uses a filehandle from that filesystem,
nfsd_set_fh_dentry() will report an error, but still stores the export
in "struct svc_fh" even though it also drops the reference (exp_put()).
This means that when fh_put() is called an extra reference will be dropped
which can lead to use-after-free and possible denial of service.
Normal NFS usage will not provide a pseudo-root filehandle to a v3
client. This bug can only be triggered by the client synthesising an
incorrect filehandle.
To fix this we move the assignments to the svc_fh later, after all
possible error cases have been detected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use dst_dev_rcu() in sk_setup_caps()
Use RCU to protect accesses to dst->dev from sk_setup_caps()
and sk_dst_gso_max_size().
Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(),
and ip_dst_mtu_maybe_forward().
ip4_dst_hoplimit() can use dst_dev_net_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
pidfs: validate extensible ioctls
Validate extensible ioctls stricter than we do now. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment. |
| dataSIMS Avionics ARINC 664-1 version 4.5.3 contains a local buffer overflow vulnerability that allows attackers to overwrite memory by manipulating the milstd1553result.txt file. Attackers can craft a malicious file with carefully constructed payload and alignment sections to potentially execute arbitrary code on the Windows system. |
| A flaw was found in the 3scale Developer Portal. When creating or updating an account in the Developer Portal UI it is possible to modify fields explicitly configured as read-only or hidden, allowing an attacker to modify restricted information. |
| Toshiba printers contain a suidperl binary and it has a Local Privilege Escalation vulnerability. A local attacker can get root privileges. As for the affected products/models/versions, see the reference URL. |
| EasyFlow GP developed by Digiwin has a Denial of service vulnerability, allowing unauthenticated remote attackers to send specific requests that result in denial of web service. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes. |
| Allied Telesis AT-S115 1.2.0 devices before 1.00.024 with Boot Loader 1.00.006 allow Directory Traversal to achieve partial access to data. |
| An issue in Nepstech Wifi Router xpon (terminal) NTPL-Xpon1GFEVN, hardware verstion 1.0 firmware 2.0.1 allows a remote attacker to execute arbitrary code via the router's Telnet port 2345 without requiring authentication credentials. |
| OAuthenticator is software that allows OAuth2 identity providers to be plugged in and used with JupyterHub. JupyterHub < 5.0, when used with `GlobusOAuthenticator`, could be configured to allow all users from a particular institution only. This worked fine prior to JupyterHub 5.0, because `allow_all` did not take precedence over `identity_provider`. Since JupyterHub 5.0, `allow_all` does take precedence over `identity_provider`. On a hub with the same config, now all users will be allowed to login, regardless of `identity_provider`. `identity_provider` will basically be ignored. This is a documented change in JupyterHub 5.0, but is likely to catch many users by surprise. OAuthenticator 16.3.1 fixes the issue with JupyterHub 5.0, and does not affect previous versions. As a workaround, do not upgrade to JupyterHub 5.0 when using `GlobusOAuthenticator` in the prior configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix the deadlock of enetc_mdio_lock
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition. |
| Toshiba printers use Sendmail to send emails to recipients. Sendmail is used with several insecure directories. A local attacker can inject a malicious Sendmail configuration file. As for the affected products/models/versions, see the reference URL. |
| Toshiba printers provides API without authentication for internal access. A local attacker can bypass authentication in applications, providing administrative access. As for the affected products/models/versions, see the reference URL. |
| GLPI, which stands for Gestionnaire Libre de Parc Informatique, is a Free Asset and IT Management Software package, that provides ITIL Service Desk features, licenses tracking and software auditing. In versions 10.0.0 to before 10.0.19, a connected user without administration rights can change the rules execution order. This issue has been patched in version 10.0.19. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix null pointer dereference on zero-length checksum
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT. |
| Allure 2 is the version 2.x branch of Allure Report, a multi-language test reporting tool. A critical XML External Entity (XXE) vulnerability exists in the xunit-xml-plugin used by Allure 2 prior to version 2.34.1. The plugin fails to securely configure the XML parser (`DocumentBuilderFactory`) and allows external entity expansion when processing test result .xml files. This allows attackers to read arbitrary files from the file system and potentially trigger server-side request forgery (SSRF). Version 2.34.1 contains a patch for the issue. |
| The Kiuwan Local Analyzer (KLA) Java scanning application contains several
hard-coded secrets in plain text format. In some cases, this can
potentially compromise the confidentiality of the scan results. Several credentials were found in the JAR files of the Kiuwan Local Analyzer.
The
JAR file "lib.engine/insight/optimyth-insight.jar" contains the file
"InsightServicesConfig.properties", which has the configuration tokens
"insight.github.user" as well as "insight.github.password" prefilled
with credentials. At least the specified username corresponds to a valid
GitHub account. The
JAR file "lib.engine/insight/optimyth-insight.jar" also contains the
file "es/als/security/Encryptor.properties", in which the key used for
encrypting the results of any performed scan.
This issue affects Kiuwan SAST: <master.1808.p685.q13371 |
| Valibot helps validate data using a schema. In versions from 0.31.0 to 1.1.0, the EMOJI_REGEX used in the emoji action is vulnerable to a Regular Expression Denial of Service (ReDoS) attack. A short, maliciously crafted string (e.g., <100 characters) can cause the regex engine to consume excessive CPU time (minutes), leading to a Denial of Service (DoS) for the application. This issue has been patched in version 1.2.0. |
