Total
4902 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26632 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Fix iterating over an empty bio with bio_for_each_folio_all If the bio contains no data, bio_first_folio() calls page_folio() on a NULL pointer and oopses. Move the test that we've reached the end of the bio from bio_next_folio() to bio_first_folio(). [axboe: add unlikely() to error case] | ||||
| CVE-2024-26626 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmr: fix kernel panic when forwarding mcast packets The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/kn ---truncated--- | ||||
| CVE-2024-26623 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent race issues involving the adminq There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again. | ||||
| CVE-2024-26615 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix illegal rmb_desc access in SMC-D connection dump A crash was found when dumping SMC-D connections. It can be reproduced by following steps: - run nginx/wrk test: smc_run nginx smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL> - continuously dump SMC-D connections in parallel: watch -n 1 'smcss -D' BUG: kernel NULL pointer dereference, address: 0000000000000030 CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55 RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x66/0x150 ? exc_page_fault+0x69/0x140 ? asm_exc_page_fault+0x26/0x30 ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] ? __kmalloc_node_track_caller+0x35d/0x430 ? __alloc_skb+0x77/0x170 smc_diag_dump_proto+0xd0/0xf0 [smc_diag] smc_diag_dump+0x26/0x60 [smc_diag] netlink_dump+0x19f/0x320 __netlink_dump_start+0x1dc/0x300 smc_diag_handler_dump+0x6a/0x80 [smc_diag] ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag] sock_diag_rcv_msg+0x121/0x140 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5a/0x110 sock_diag_rcv+0x28/0x40 netlink_unicast+0x22a/0x330 netlink_sendmsg+0x1f8/0x420 __sock_sendmsg+0xb0/0xc0 ____sys_sendmsg+0x24e/0x300 ? copy_msghdr_from_user+0x62/0x80 ___sys_sendmsg+0x7c/0xd0 ? __do_fault+0x34/0x160 ? do_read_fault+0x5f/0x100 ? do_fault+0xb0/0x110 ? __handle_mm_fault+0x2b0/0x6c0 __sys_sendmsg+0x4d/0x80 do_syscall_64+0x69/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 It is possible that the connection is in process of being established when we dump it. Assumed that the connection has been registered in a link group by smc_conn_create() but the rmb_desc has not yet been initialized by smc_buf_create(), thus causing the illegal access to conn->rmb_desc. So fix it by checking before dump. | ||||
| CVE-2024-26612 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs, fscache: Prevent Oops in fscache_put_cache() This function dereferences "cache" and then checks if it's IS_ERR_OR_NULL(). Check first, then dereference. | ||||
| CVE-2024-26611 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix usage of multi-buffer BPF helpers for ZC XDP Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). | ||||
| CVE-2024-26607 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: sii902x: Fix probing race issue A null pointer dereference crash has been observed rarely on TI platforms using sii9022 bridge: [ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x] [ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x] [ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm] [ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper] [ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper] [ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm] [ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper] [ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper] [ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper] [ 53.326401] drm_client_register+0x5c/0xa0 [drm] [ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper] [ 53.336881] tidss_probe+0x128/0x264 [tidss] [ 53.341174] platform_probe+0x68/0xc4 [ 53.344841] really_probe+0x188/0x3c4 [ 53.348501] __driver_probe_device+0x7c/0x16c [ 53.352854] driver_probe_device+0x3c/0x10c [ 53.357033] __device_attach_driver+0xbc/0x158 [ 53.361472] bus_for_each_drv+0x88/0xe8 [ 53.365303] __device_attach+0xa0/0x1b4 [ 53.369135] device_initial_probe+0x14/0x20 [ 53.373314] bus_probe_device+0xb0/0xb4 [ 53.377145] deferred_probe_work_func+0xcc/0x124 [ 53.381757] process_one_work+0x1f0/0x518 [ 53.385770] worker_thread+0x1e8/0x3dc [ 53.389519] kthread+0x11c/0x120 [ 53.392750] ret_from_fork+0x10/0x20 The issue here is as follows: - tidss probes, but is deferred as sii902x is still missing. - sii902x starts probing and enters sii902x_init(). - sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from DRM's perspective. - sii902x calls sii902x_audio_codec_init() and platform_device_register_data() - The registration of the audio platform device causes probing of the deferred devices. - tidss probes, which eventually causes sii902x_bridge_get_edid() to be called. - sii902x_bridge_get_edid() tries to use the i2c to read the edid. However, the sii902x driver has not set up the i2c part yet, leading to the crash. Fix this by moving the drm_bridge_add() to the end of the sii902x_init(), which is also at the very end of sii902x_probe(). | ||||
| CVE-2024-26600 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. | ||||
| CVE-2024-26591 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation. | ||||
| CVE-2024-26590 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix inconsistent per-file compression format EROFS can select compression algorithms on a per-file basis, and each per-file compression algorithm needs to be marked in the on-disk superblock for initialization. However, syzkaller can generate inconsistent crafted images that use an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA algorithmtype even it's not set in `sbi->available_compr_algs`. This can lead to an unexpected "BUG: kernel NULL pointer dereference" if the corresponding decompressor isn't built-in. Fix this by checking against `sbi->available_compr_algs` for each m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset bitmap is now fixed together since it was harmless previously. | ||||
| CVE-2024-26587 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 | ||||
| CVE-2022-49021 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: fix null-ptr-deref while probe() failed I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). | ||||
| CVE-2022-49019 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: nixge: fix NULL dereference In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2022-49010 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Check for null before removing sysfs attrs If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. | ||||
| CVE-2022-49009 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. | ||||
| CVE-2022-48984 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix. | ||||
| CVE-2022-48983 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: Fix a null-ptr-deref in io_tctx_exit_cb() Syzkaller reports a NULL deref bug as follows: BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3 Read of size 4 at addr 0000000000000138 by task file1/1955 CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_tctx_exit_cb+0x53/0xd3 kasan_report+0xbb/0x1f0 ? io_tctx_exit_cb+0x53/0xd3 kasan_check_range+0x140/0x190 io_tctx_exit_cb+0x53/0xd3 task_work_run+0x164/0x250 ? task_work_cancel+0x30/0x30 get_signal+0x1c3/0x2440 ? lock_downgrade+0x6e0/0x6e0 ? lock_downgrade+0x6e0/0x6e0 ? exit_signals+0x8b0/0x8b0 ? do_raw_read_unlock+0x3b/0x70 ? do_raw_spin_unlock+0x50/0x230 arch_do_signal_or_restart+0x82/0x2470 ? kmem_cache_free+0x260/0x4b0 ? putname+0xfe/0x140 ? get_sigframe_size+0x10/0x10 ? do_execveat_common.isra.0+0x226/0x710 ? lockdep_hardirqs_on+0x79/0x100 ? putname+0xfe/0x140 ? do_execveat_common.isra.0+0x238/0x710 exit_to_user_mode_prepare+0x15f/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0023:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... This happens because the adding of task_work from io_ring_exit_work() isn't synchronized with canceling all work items from eg exec. The execution of the two are ordered in that they are both run by the task itself, but if io_tctx_exit_cb() is queued while we're canceling all work items off exec AND gets executed when the task exits to userspace rather than in the main loop in io_uring_cancel_generic(), then we can find current->io_uring == NULL and hit the above crash. It's safe to add this NULL check here, because the execution of the two paths are done by the task itself. [axboe: add code comment and also put an explanation in the commit msg] | ||||
| CVE-2022-48972 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly. | ||||
| CVE-2022-48970 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/ | ||||
| CVE-2022-48969 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time | ||||